Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Onsemi's AR0543CSSC25SMKA0-CR image sensor features 1.40x1.40 um pixel size, 27 MHz master clock, and 66 dB dynamic range. Ideal for applications requiring a digital voltage output interface, such as frame arrays in cameras with a resolution of 2592x1944 pixels at 15 fps.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Native Components
$0.354
$0.339
Northwest PG Solutions
$0.389
$0.343
AZTECH Wire
$10.940
Problanco Electronics
Corphita
Kulean Microsystems
TANS Electronics
SupplyDigital Components
UHIMA Technologies
Corohmni
The small pixel size allows for high-resolution images with sharp details and clarity.
The low supply voltage ensures efficient power usage and can help prolong the lifespan of the image sensor.
The high master clock frequency enables fast data processing and contributes to a quick response time for capturing images.
The compact body width makes the image sensor suitable for integration into various devices or systems without taking up too much space.
CMOS image sensors are known for their low power consumption, high integration capabilities, and excellent image quality.
The wide operating temperature range allows the image sensor to be used in various environmental conditions without compromising performance.
Digital output simplifies the integration of the image sensor with other digital devices and systems, providing easy data transfer and processing.
A high dynamic range ensures that the image sensor can capture both bright and dark areas in a scene accurately, resulting in high-quality images with good contrast.
The frame array type allows for capturing a full frame of an image at once, enabling fast and efficient image acquisition.
Surface mount installation simplifies the mounting process and provides a secure attachment of the image sensor to the circuit board or device.
Image Sensors AR0543CSSC25SMKA0-CR attributes and parameters. Explore more Image Sensors devices from Onsemi
Additional Features:
Array Type:
Body Width:
Body Height:
Body Length/Diameter:
Data Rate:
Dynamic Range:
Frame Rate:
Horizontal Pixel:
Master Clock:
Mounting Feature:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optical Format (inch):
Output Interface Type:
Output Type:
Package Shape or Style:
Pixel Size (um):
Sensitivity (V/lx.s):
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Termination Type:
Vertical Pixel:
PCN Obsolescence/ EOL - Mult Dev EOL 29/Jan/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fagor Electronica S Coop
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microchip Technology
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Diotec Semiconductor Ag
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
Db Lectro
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KAI-1020M
Onsemi
IMAGE SENSOR,CCD;
NOIP1SE5000A-QTI
NOIP1SE5000A-QTI by Onsemi is a 4.8x4.8 um CMOS image sensor with 2592x2048 pixels, offering a dynamic range of 60 dB and sensitivity of 7.5 V/lx.s. It operates b/w -40 to 85 °C, has a max supply voltage of 1.9 V, and supports a frame rate of up to 100 fps. Ideal for applications requiring high-resolution imaging in various lighting conditions.
OV5640-A71A
Omnivision Technologies
Image Sensors;
MT9V022IA7ATM-DR1
Onsemi's MT9V022IA7ATM-DR1 is a 6x6 um CMOS image sensor with 752H x 480V pixels, operating at 26.6 MHz clock speed. It offers a dynamic range of 55 dB and sensitivity of 4.8 V/lx.s, suitable for applications requiring high-quality digital imaging in industrial automation and surveillance systems.
AR0130CSSC00SPCA0-DPBR2
Onsemi's AR0130CSSC00SPCA0-DPBR2 is a 1/3-inch CMOS image sensor with 1280x960 resolution, 3.75um pixel size, and 50MHz master clock. Ideal for applications requiring high sensitivity (5.6 V/lx.s) and a wide dynamic range of 82dB. Suitable for use in digital cameras, surveillance systems, and automotive imaging.
KAI-4011-AAA-CR-AE
KAI-4011-AAA-CR-AE by Onsemi is a CCD image sensor with 2048x2048 pixels, 7.4um pixel size, and 60dB dynamic range. It operates b/w -50 °C to 70°C and has a data rate of 40 Mbps. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
MT9V131C12STC-DR
MT9V131C12STC-DR by Onsemi is a 640x480 CMOS image sensor with 5.60um pixel size and 27 MHz master clock. Ideal for digital cameras, it offers a dynamic range of 60 dB and operates at temperatures ranging from -20 to 70 °C.
KAI-01150-CBA-JD-AE
The Onsemi KAI-01150-CBA-JD-AE is a 5.5x5.5 um CCD image sensor with 1280H x 720V pixels, offering a dynamic range of 64 dB. It operates b/w -50 to 70 °C and requires a supply voltage of 14.5-15.5 V. Ideal for applications requiring digital voltage output in an optical format of 1/2 inch, such as industrial imaging systems.
KAI-0340-ABB-CP-AA
KAI-0340-ABB-CP-AA by Onsemi is an image sensor with 7.4x7.4 um pixel size, 640 horizontal pixels, and 480 vertical pixels. It operates b/w -50 to 70 °C with a supply voltage range of 14.75V to 15.25V. Ideal for applications requiring a CCD image sensor with a dynamic range of 62 dB in a ceramic, glass-sealed housing.
KAI-08051-AXA-JD-AE
Onsemi's KAI-08051-AXA-JD-AE image sensor features 5.5um pixel size, 3296H x 2472V resolution, and 66dB dynamic range. Ideal for applications requiring high-quality imaging in a compact form factor, such as industrial cameras or medical devices.
CYII4SC6600AA-HAC
CYII4SC6600AA-HAC by Onsemi is an image sensor with 3.5x3.5 um pixel size, operating at a max supply voltage of 3.3V and a master clock of 40 MHz. Ideal for applications requiring high sensitivity and digital output interface, such as surveillance cameras or industrial imaging systems.
CMV4000-3E5M1CA
Ams Ag
CMV4000-3E5M1CA by Ams Ag is a ceramic-housed CMOS image sensor with a 60 dB dynamic range, 37 fps frame rate, and sensitivity of 5.56 V/lx.s. It operates b/w -30°C to 70°C, features SPI interface output, and is ideal for applications requiring high-quality imaging in various environmental conditions.
KAI-11002-CBA-CD-B2
KAI-11002-CBA-CD-B2 by Onsemi is an image sensor with 9x9 um pixel size, 4008 horizontal pixels, and 2672 vertical pixels. It operates b/w -50 to 70 °C with a dynamic range of 66 dB. Ideal for applications requiring high-resolution imaging in various industries.
NOIV1SN1300A-QDC
NOIV1SN1300A-QDC by Onsemi is an image sensor with 1280x1024 resolution, 4.80x4.80 um pixel size, and 62 MHz master clock. Ideal for applications requiring high-speed imaging such as machine vision systems or industrial cameras due to its 150 fps frame rate and CMOS sensor technology.
CYIWOSC3000AA
CYIWOSC3000AA by Onsemi is an image sensor with 2.54X2.54 um pixel size, 100 MHz master clock, and 55 dB dynamic range. Ideal for applications requiring a full-frame array, it operates b/w -30 to 70 °C and outputs digital voltage via I2C interface at 14 fps.
MT9V034C12STC-DP
Onsemi's MT9V034C12STC-DP image sensor features 6x6 um pixel size, 27 MHz master clock, and 752x480 resolution. Ideal for applications requiring high-quality imaging such as surveillance cameras, drones, and industrial machine vision systems.
KAE-02150-ABB-JP-EE
KAE-02150-ABB-JP-EE by Onsemi is an image sensor with 5.5X5.5 um pixel size, 1920x1080 resolution, and 68 dB dynamic range. It operates b/w -70 to 40 °C and is ideal for high-quality imaging applications requiring a max supply voltage of 6V and min of 4.5V.
MT9M001C12STM-DP
MT9M001C12STM-DP by Onsemi is an image sensor with 5.2x5.2 um pixel size, 48 MHz master clock, and 1280x1024 resolution. Ideal for digital cameras, surveillance systems, and industrial imaging applications due to its high dynamic range of 68.2 dB and frame rate of 30 fps.
AR0220AT4R00XUEA2-DPBR
Onsemi's AR0220AT4R00XUEA2-DPBR is a 1/1.8 inch CMOS image sensor with 1828x948 pixels, offering digital output via a 2-wire interface at 60 fps. Ideal for surface mount applications in frame arrays, this sensor measures 9" x 12mm x 1.7mm and features Tin/Silver/Copper terminal finish for solder connections.
KAI-08670-AXA-JD-B1
Onsemi's KAI-08670-AXA-JD-B1 image sensor features 7.4x7.4 um pixel size, 40 MHz master clock, and 3600 horizontal pixels. Ideal for applications requiring high-quality imaging with a max supply voltage of 15.5 V and operating temperature range from -50 to 70 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AR0521SR2C09SURA0-DP1
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Package Shape or Style: SQUARE; Array Type: FRAME; Body Width: 12 inch; Termination Type: SOLDER;
AR0521SR2C09SURA0-DP
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Package Shape or Style: SQUARE; Termination Type: SOLDER; Output Interface Type: 2-WIRE INTERFACE; Array Type: FRAME;
AR0521SR2C09SURA0-DR1
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Package Shape or Style: SQUARE; Output Interface Type: 2-WIRE INTERFACE; Optical Format (inch): 1/2.5; Vertical Pixel: 1944;
AR0521SR2M09SURA0-DP
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Package Shape or Style: SQUARE; Horizontal Pixel: 2592; Output Interface Type: 2-WIRE INTERFACE; Body Length/Diameter: 12 mm;
AR0521SR2C09SURA0-DR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Package Shape or Style: SQUARE; Frame Rate: 60 fps; Output Interface Type: 2-WIRE INTERFACE; Termination Type: SOLDER;
AR0521SR2M09SURA0-DR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Package Shape or Style: SQUARE; Optical Format (inch): 1/2.5; Vertical Pixel: 1944; Body Width: 12 inch;
AR0522SRSC09SURA0-DP
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL OUTPUT; Package Shape or Style: SQUARE; Body Height: 1.62 mm; Housing: PLASTIC;
AR0522SRSC09SURA0-DR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL OUTPUT; Package Shape or Style: SQUARE; Output Interface Type: 2-WIRE INTERFACE; Additional Features: ROLLING SHUTTER;
AR0522SRSM09SURA0-DP
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL OUTPUT; Package Shape or Style: SQUARE; Vertical Pixel: 1944; Housing: PLASTIC;
AR0522SRSM09SURA0-DR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL OUTPUT; Package Shape or Style: SQUARE; Housing: PLASTIC; Vertical Pixel: 1944;
AR0542MBSC25SUD20
IMAGE SENSOR,CMOS; Output Type: DIGITAL VOLTAGE; Minimum Supply Voltage: 1.7 V; Frame Rate: 15 fps; Output Interface Type: 2-WIRE INTERFACE; Pixel Size (um): 1.40X1.40;
AR0543CSSC25SMW90
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Optical Format (inch): 1/4; Minimum Supply Voltage: 1.15 V;
AR0543CSSC25SUD20
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -30 Cel; Dynamic Range: 66 dB;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved