Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MT9J003I12STCV2-TP by Onsemi is a CMOS image sensor with 3856x2764 pixels, 1.67um pixel size, and 65.2dB dynamic range. It operates at -30 to 70°C, has a digital output interface, and is ideal for high-resolution imaging applications requiring fast frame rates up to 60fps.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Nova Conductors
AZTECH Wire
$15.010
Ampacity Inc.
$55.750
Problanco Electronics
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Netroflash
Continental Prestige Electronics
Argo Parts USA
Corphita
Corohmni
UHIMA Technologies
Higher pixel size allows for more light to be captured, resulting in better image quality and low light performance.
Higher maximum supply voltage allows for better signal integrity and performance.
High master clock frequency ensures fast data processing and high frame rates.
Compact body width makes it suitable for integration into various devices and applications.
Wide operating temperature range enables the sensor to be used in both hot and cold environments.
Image Sensors MT9J003I12STCV2-TP attributes and parameters. Explore more Image Sensors devices from Onsemi
Additional Features:
Array Type:
Body Width:
Body Height:
Body Length/Diameter:
Data Rate:
Dynamic Range:
Frame Rate:
Horizontal Pixel:
Housing:
Master Clock:
Mounting Feature:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optical Format (inch):
Output Interface Type:
Output Range:
Output Type:
Package Shape or Style:
Pixel Size (um):
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Termination Type:
Vertical Pixel:
PCN Obsolescence/ EOL - Mult Dev EOL 29/Mar/2022
PCN Assembly/Origin - Update 05/Nov/2020
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
STM32H743IIT6
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
New Jersey Semiconductor Products
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
Microchip Technology
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0EDHP
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
AR0130CSSC00SPCA0-DPBR2
Onsemi
Onsemi's AR0130CSSC00SPCA0-DPBR2 is a 1/3-inch CMOS image sensor with 1280x960 resolution, 3.75um pixel size, and 50MHz master clock. Ideal for applications requiring high sensitivity (5.6 V/lx.s) and a wide dynamic range of 82dB. Suitable for use in digital cameras, surveillance systems, and automotive imaging.
AR0833CS3C12SUAA0-DP
Onsemi's AR0833CS3C12SUAA0-DP is a 1/3.2-inch CMOS image sensor with 3264x2448 pixels, offering a max supply voltage of 1.3V and a master clock of 24 MHz. Ideal for digital current output applications, it operates b/w -30 to 70 °C and features a dynamic range of 64 dB.
KAI-11002-CAA-CD-AE
KAI-11002-CAA-CD-AE by Onsemi is an image sensor with 9x9 um pixel size, 4008 horizontal pixels, and 2672 vertical pixels. It operates b/w -50 to 70 °C and has a dynamic range of 66 dB. Ideal for digital imaging applications requiring high-resolution and low-light performance.
AS0260CSSC28SUD20
AS0260CSSC28SUD20 by Onsemi is a CMOS image sensor with 1920x1080 pixels, 1.4um pixel size, and 54MHz master clock. It operates b/w -30 to 70 °C and has a dynamic range of 65dB. Ideal for applications requiring high-resolution imaging at fast frame rates.
ASX340AT3C00XPED0-DRBR
ASX340AT3C00XPED0-DRBR by Onsemi is a 5.6x5.6 um CMOS image sensor with 728H x 560V pixels, operating at 27 Mbps data rate and offering a dynamic range of 87 dB. It is commonly used in applications requiring a digital voltage output interface, such as frame arrays for surface mounting features at temperatures ranging from -40 to 105 °C.
11KAI-04070-CBA-JD-BA
The Onsemi 11KAI-04070-CBA-JD-BA is an image sensor with 2048x2048 pixels, 7.4um pixel size, and 70.5dB dynamic range. It operates b/w -50 to 70 °C, suitable for industrial imaging applications requiring high-resolution and low-light performance. The rectangular package style with through-hole mounting makes it easy to integrate into various systems.
KAI-08670-AXA-JD-AE
KAI-08670-AXA-JD-AE by Onsemi is an image sensor with 7.4x7.4 um pixel size, 40 MHz master clock, and 82 dB dynamic range. Ideal for applications requiring high-quality imaging such as surveillance cameras, industrial inspection systems, and medical imaging devices.
KAI-0340-AAA-CP-AE-DUAL
The Onsemi KAI-0340-AAA-CP-AE-DUAL is a 640x480 CCD image sensor with 7.4um pixel size, offering a dynamic range of 69dB. It operates b/w -50 to 70 °C, suitable for industrial imaging applications requiring high-quality images in varying conditions. The rectangular package style and through-hole mounting feature make it easy to integrate into systems.
KAI-29052-QXA-JD-B1
KAI-29052-QXA-JD-B1 by Onsemi is an image sensor with 5.5X5.5 um pixel size, 6576 horizontal pixels, and 4384 vertical pixels. It operates b/w -50 to 70 °C with a dynamic range of 66 dB. Ideal for applications requiring high-resolution imaging in industrial or scientific settings at frame rates up to 4 fps.
MT9V128IA3XTC-TR
MT9V128IA3XTC-TR by Onsemi is a 5.6x5.6 um CMOS image sensor with 680H x 512V pixels, offering a dynamic range of 74.8 dB and operating at up to 105°C. Ideal for applications requiring a digital voltage output interface, such as frame arrays in need of high-speed imaging at 60 fps.
MT9M025IX3STC
The Onsemi MT9M025IX3STC image sensor features 3.75um pixel size, 50MHz master clock, and 1/3 inch optical format. Ideal for applications requiring high-resolution imaging with a max supply voltage of 1.95V and digital output interface at a data rate of 700Mbps.
AR0234CSSM00SUKA0-CP1
The Onsemi AR0234CSSM00SUKA0-CP1 is a CMOS image sensor with 1920x1200 resolution, 3x3 um pixel size, and 71.4 dB dynamic range. It operates at -40 to 85 °C and has a frame rate of 120 fps. Ideal for applications requiring high-quality digital imaging in automotive or surveillance systems.
NOIP3FN1300A-QDI
NOIP3FN1300A-QDI by Onsemi is an Image Sensor with 4.80X4.80 um pixel size, 1.9V max supply voltage, and 72 MHz master clock. Ideal for applications requiring high-speed digital imaging with a resolution of 1280x1024 pixels at a frame rate of 210 fps.
KAI-08670-AXA-JD-B1
Onsemi's KAI-08670-AXA-JD-B1 image sensor features 7.4x7.4 um pixel size, 40 MHz master clock, and 3600 horizontal pixels. Ideal for applications requiring high-quality imaging with a max supply voltage of 15.5 V and operating temperature range from -50 to 70 °C.
TCD1254GFG(8Z,AA)
Toshiba
Toshiba TCD1254GFG(8Z,AA) Image Sensor features 5.25X64 um pixel size, 1.5-3.0V digital voltage output range, and 52.04 dB dynamic range. Ideal for applications requiring high sensitivity (103 V/lx.s), such as surface mount linear array CCD sensors in imaging systems with spectral response of 400-1100 nm.
AR0239ATSC00XUD20
IMAGE SENSOR,CMOS;
TCD1305DG
Toshiba TCD1305DG is an 8X64 um CCD image sensor with a 3648 horizontal pixel array. Operating at 4.5-5.5V, it offers a spectral response of 400-1200nm and sensitivity of 64 V/lx.s. Ideal for applications requiring high-resolution imaging in industrial cameras or scientific instruments.
NOIX3SE012KB-LTI1
NOIX3SE012KB-LTI1 by Onsemi is an Image Sensor with 3.2X3.2 um Pixel Size, 32.4 MHz Master Clock, and 4096 Horizontal Pixels. Ideal for applications requiring high-resolution imaging such as surveillance cameras, industrial inspection systems, and medical imaging devices due to its superior performance and digital output interface (I2C/SPI).
MT9M021IA3XTM-DRBR1
MT9M021IA3XTM-DRBR1 by Onsemi is an image sensor with 3.75um pixel size, 50 MHz master clock, and 1280x960 resolution. Ideal for digital cameras, surveillance systems, and industrial imaging applications due to its high sensitivity (5.3 V/lx.s), 60 fps frame rate, and compact square package design.
KAI-16000-AAA-JD-B2
Kodak Image Sensor Solutions
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Additional Features: SENSITIVITY IS 30 UV/ELECTRON; Body Height: 4.88 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MT9J003I12STCV2-DP
MT9J003I12STCV2-DP by Onsemi is an image sensor with 3856x2764 pixels, 1.67um pixel size, and a 48MHz master clock. It is commonly used in digital cameras for its high resolution and fast frame rate of 60fps.
MT9J003I12STCU-DP
Onsemi's MT9J003I12STCU-DP image sensor features 3856x2764 pixels, 1.67um pixel size, and a 48MHz master clock. Ideal for high-resolution imaging applications in industries like surveillance, automotive, and machine vision due to its high frame rate of 60fps and digital output interface.
MT9J003I12STMV-DP
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.40-1.40V; Data Rate: 480 Mbps;
MT9J001I12STCV
Image Sensors;
MT9J003D00STCUC2CBC1
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Output Range: 0.40-1.40V; Additional Features: IT ALSO HAVE ANALOG SUPPLY VOLTAGE 2.40-3.10 V, ELECTRONIC ROLLING SHUTTER; Maximum Operating Temperature: 70 Cel;
MT9J003D00STCVC2CBC1
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Output Range: 0.40-1.40V; Array Type: FRAME; Minimum Supply Voltage: 1.7 V;
MT9J003D00STMUC2CBC1-200
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL OUTPUT; Package Shape or Style: SQUARE; Output Range: 0.40-1.40V; Frame Rate: 60 fps;
MT9J003I12STCU
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.40-1.40V; Maximum Supply Voltage: 1.9 V;
MT9J003I12STCU-DR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL OUTPUT; Package Shape or Style: SQUARE; Output Range: 0.40-1.40V; Body Length/Diameter: 12 mm;
MT9J003I12STCV2
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.40-1.40V; Minimum Operating Temperature: -30 Cel;
MT9J003I12STCV2-TB-DP
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.40-1.40V; Optical Format (inch): 1/2.3;
MT9J003I12STCV2-TB-TP
MT9J003I12STMU-DP
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL OUTPUT; Package Shape or Style: SQUARE; Output Range: 0.40-1.40V; Additional Features: IT ALSO HAVE ANALOG SUPPLY VOLTAGE 2.4-3.1 V, ELECTRONIC ROLLING SHUTTER;
MT9J003I12STMV-TB-DP
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.40-1.40V; Minimum Supply Voltage: 1.7 V;
MT9J003T12STCV
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.40-1.40V; Maximum Operating Current: 190 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved