Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KAI-04022-FBA-CD-AE by Onsemi is an image sensor with 2048x2048 pixels, 7.4um pixel size, and 72dB dynamic range. Ideal for applications requiring high-resolution imaging in a compact form factor, such as industrial machine vision systems or scientific cameras.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
AZTECH Wire
$13.200
Kulean Microsystems
Problanco Electronics
TANS Electronics
SupplyDigital Components
Corphita
UHIMA Technologies
Corohmni
Smaller pixel size allows for higher resolution images to be captured, making this product ideal for applications requiring detailed image quality.
Higher supply voltage allows for more power to be provided to the image sensor, potentially leading to better performance in low light conditions.
Compact body width makes this image sensor suitable for applications where space is limited.
CCD image sensors are known for their high-quality image output and low noise, making them a preferred choice for various imaging applications.
Rectangular package shape allows for easy integration and mounting in different devices or systems.
Low minimum supply voltage ensures that the image sensor can operate efficiently without consuming too much power.
Wide operating temperature range allows this image sensor to be used in various environments without the risk of overheating.
High pixel count horizontally provides detailed and sharp images, making this product suitable for applications requiring high-resolution imaging.
Low minimum operating temperature ensures that this image sensor can function effectively even in extremely cold conditions.
Ceramic housing provides durability and thermal stability to the image sensor, making it suitable for harsh environments.
High dynamic range allows this image sensor to capture a wide range of light intensities, resulting in better overall image quality.
High pixel count vertically ensures quality images in both horizontal and vertical orientations, making this image sensor versatile for various applications.
Compact body length/diameter makes this image sensor easy to integrate into different devices or systems.
4/3 optical format provides a versatile aspect ratio for capturing images, suitable for a wide range of applications.
Solder termination type allows for easy and secure connections during installation, ensuring reliable performance.
Interline array type provides fast readout speeds, making this image sensor suitable for applications where capturing moving objects is essential.
Through hole mounting feature allows for secure and stable mounting in various devices or systems, ensuring reliable performance.
Image Sensors KAI-04022-FBA-CD-AE attributes and parameters. Explore more Image Sensors devices from Onsemi
Additional Features:
Array Type:
Body Width:
Body Height:
Body Length/Diameter:
Dynamic Range:
Horizontal Pixel:
Housing:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optical Format (inch):
Package Shape or Style:
Pixel Size (um):
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Termination Type:
Vertical Pixel:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Formosa Microsemi
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
FDN5618P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
Dc Components
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
TX253SPD-30
Texas Instruments
TX253SPD-30 by Texas Instruments is an image sensor with 7.4x7.4um pixel size, 680H x 500V resolution, and operates at -10 to 45°C. It requires a 12V power supply and features THROUGH HOLE MOUNTing. Ideal for applications requiring high-resolution imaging in varying temperature environments.
OV09715-V28A
Omnivision Technologies
Image Sensors;
MT9V128IA3XTC-TP
MT9V128IA3XTC-TP by Onsemi is a 5.6x5.6 um CMOS image sensor with 680H x 512V pixels, offering a dynamic range of 74.8 dB and operating at up to 105°C. Ideal for applications requiring a digital voltage output interface, such as frame arrays in surveillance cameras or industrial imaging systems.
MT9M413C36STM
The Onsemi MT9M413C36STM is a 12x12 um CMOS image sensor with 1280H x 1024V pixels. Operating at 66 MHz, it has a max supply voltage of 3.6 V and frame rate of 500 fps. Ideal for applications requiring high-resolution imaging in industrial automation and surveillance systems.
ASX340AT2C00XPED0-DRBR
ASX340AT2C00XPED0-DRBR by Onsemi is a 5.6x5.6 um CMOS image sensor with 728H x 560V pixels, offering a dynamic range of 87 dB and operating at temperatures from -40 to 105°C. It has a digital voltage output interface, operates at a max supply voltage of 1.95V, and features a frame rate of 60 fps, making it suitable for applications requiring high-quality imaging in various environments.
AMIS-70700
AMIS-70700 by Onsemi is a CMOS image sensor with 10.6x10.6 um pixel size, offering 60 dB dynamic range and 750x400 resolution. Operating at -40 to 105 °C, it has a digital voltage output type and supports up to 20 Mbps data rate. Ideal for full-frame applications in imaging systems requiring high-quality visuals.
KAI-16070-CXA-JD-B1
KAI-16070-CXA-JD-B1 by Onsemi is an image sensor with 7.4x7.4 um pixel size, 40 MHz master clock, and 15.5 V max supply voltage. Ideal for applications requiring high-resolution imaging such as industrial machine vision systems or scientific cameras due to its impressive technical specifications.
KLI-2113
The Onsemi KLI-2113 is an image sensor with 2098 horizontal and vertical pixels, offering a dynamic range of 76 dB. Operating b/w 0-70 °C, it has a supply voltage range of 11.5-12.5 V and outputs analog voltage up to 2V. Ideal for applications requiring high-resolution imaging in various environments.
AS0140AT2C00XUSM0-DPBR-E
Onsemi AS0140AT2C00XUSM0-DPBR-E is a 3x3 um CMOS image sensor with 1280H x 800V pixels. It operates at 1.7-1.98V, has a master clock of 27 MHz, and outputs digital voltage from 0.56-2.24V. Ideal for frame array applications with a frame rate of 60 fps in an optical format of 1/4 inch, suitable for surface mounting features.
CYII4SE6600AB-QFCH
CYII4SE6600AB-QFCH by Onsemi is an image sensor with 3.5x3.5 um pixel size, 40 MHz master clock, and 2210 horizontal pixels. Ideal for applications requiring a digital voltage output interface, such as surveillance cameras or industrial imaging systems.
MT9V138C12STC-DP
MT9V138C12STC-DP by Onsemi is a 5.60x5.60 um CMOS image sensor with 680H x 512V pixels, operating at 30 fps. It has a max supply voltage of 1.9V and a dynamic range of 74.8 dB, suitable for digital imaging applications in various industries.
KAI-08051-ABA-JP-BA
KAI-08051-ABA-JP-BA by Onsemi is an image sensor with 5.5x5.5 um pixel size, 3364 horizontal pixels, and 2520 vertical pixels. It operates b/w -50 to 70 °C and has a dynamic range of 66 dB. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
KAI-16000-AXA-JR-AE
KAI-16000-AXA-JR-AE by Onsemi is an image sensor with 7.4x7.4 um pixel size, 4872 horizontal pixels, and 3248 vertical pixels. It operates b/w -50 to 70 °C with a dynamic range of 65 dB. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
MT9V024IA7XTM-DP2
MT9V024IA7XTM-DP2 by Onsemi is a 1/3" CMOS image sensor with 6x6 um pixel size, offering 60 fps frame rate. Ideal for surface mount applications in various imaging devices due to its compact 9mm square package design.
KAI-02170-CBA-JD-BA
KAI-02170-CBA-JD-BA by Onsemi is an image sensor with 1920x1080 pixels, 7.4um pixel size, and 70.2dB dynamic range. It operates b/w -50 to 70 °C and is ideal for CCD imaging applications requiring high-quality images in a rectangular package style.
MT9V136C12STC-DR
MT9V136C12STC-DR by Onsemi is an image sensor with 5.60x5.60 um pixel size, 27 MHz master clock, and 74.6 dB dynamic range. Ideal for applications requiring a digital current output interface, such as frame arrays in surveillance cameras or industrial imaging systems.
KAI-0330-ABA-CB-AA
The Onsemi KAI-0330-ABA-CB-AA is a 9x9 um CCD image sensor with 648 (H) x 484 (V) pixels. It operates at temperatures from -50 to 70 °C and has a dynamic range of 57 dB. Ideal for applications requiring high-quality imaging in industrial or scientific settings.
AR0132AT6M00XPEA0-TPBR
The Onsemi AR0132AT6M00XPEA0-TPBR is a 1/3-inch CMOS image sensor with 1280x960 resolution, 3.75um pixel size, and 115dB dynamic range. It operates at -40 to 105°C, has a max supply voltage of 1.95V, and uses a digital output interface. Ideal for applications requiring high-resolution imaging in varying temperature conditions.
NOIX1SE8000B-LTI1
NOIX1SE8000B-LTI1 by Onsemi is an Image Sensor with 3.2x3.2um pixel size, 32.4MHz master clock, and 4096 horizontal pixels. Ideal for digital imaging applications requiring a high dynamic range of 68dB, it operates b/w -40 to 85 °C with I2C/SPI interface and outputs digital voltage in the range of 0.4-1.5V at a frame rate of 128fps.
KAI-1003-ABA-CD-AE
Onsemi's KAI-1003-ABA-CD-AE is a 12.8X12.8 um CCD image sensor with 1024x1024 pixels, offering a dynamic range of 72 dB. Operating b/w 0 to 40 °C, it has a supply voltage range of 14.5V to 15.5V and comes in a rectangular ceramic housing for industrial imaging applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KAI-02150-CBA-JD-BA
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Additional Features: IT HAS OUTPUT SENSITIVITY OF 34 MICRO VOLT PER ELECTRON; Vertical Pixel: 1080; Pixel Size (um): 5.5X5.5;
Truesense Imaging
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Optical Format (inch): 2/3; Pixel Size (um): 5.5X5.5; Additional Features: IT HAS OUTPUT SENSITIVITY OF 34 MICRO VOLT PER ELECTRON;
Kodak Image Sensor Solutions
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -50 Cel; Minimum Supply Voltage: 14.5 V;
KAI-02150-ABA-JD-BA
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Dynamic Range: 64 dB; Maximum Operating Temperature: 70 Cel; Pixel Size (um): 5.5X5.5;
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Vertical Pixel: 1080; Additional Features: IT HAS OUTPUT SENSITIVITY OF 34 MICRO VOLT PER ELECTRON; Optical Format (inch): 2/3;
Onsemi's KAI-02150-ABA-JD-BA is a 2/3" CCD image sensor with 1920x1080 resolution, 5.5um pixel size, and 64dB dynamic range. It operates b/w -50 to 70°C, suitable for industrial cameras and machine vision applications.
KAI-04050-FBA-JB-B2
KAI-04050-FBA-JB-B2 by Onsemi is an image sensor with 5.5x5.5 um pixel size, 2336 horizontal pixels, and 1752 vertical pixels. It operates b/w -50 to 70°C, has a dynamic range of 64 dB, and requires a supply voltage of 14.5-15.5 V. This rectangular CCD sensor is ideal for applications requiring high-quality imaging in various environments.
KAI-02150-AAA-JP-BA
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Array Type: INTERLINE; Vertical Pixel: 1080; Pixel Size (um): 5.5X5.5;
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Maximum Supply Voltage: 15.5 V; Minimum Operating Temperature: -50 Cel; Dynamic Range: 64 dB;
KAI-01150-CBA-FD-AE
IMAGE SENSOR,CCD; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Dynamic Range: 64 dB; Array Type: INTERLINE;
KAI-01050-FBA-FD-AE
IMAGE SENSOR,CCD; Mounting Feature: SURFACE MOUNT; Package Shape or Style: SQUARE; Body Width: 18.29 inch; Housing: CERAMIC; Horizontal Pixel: 1024;
KAI-01150-CBA-JB-AE
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 33.02 mm; Array Type: INTERLINE;
KAI-01150-ABA-JD-BA
KAI-01050-CBA-JD-BA
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Pixel Size (um): 5.5X5.5; Maximum Operating Temperature: 70 Cel;
KAI-01150-CBA-FD-BA
IMAGE SENSOR,CCD; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Horizontal Pixel: 1280; Body Length/Diameter: 18.29 mm;
KAI-01050-ABA-JD-BA
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Array Type: INTERLINE;
KAI-01150-CBA-JB-B2
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Maximum Supply Voltage: 15.5 V; Optical Format (inch): 1/2;
KAI-01050-ABA-FD-BA
IMAGE SENSOR,CCD; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Optical Format (inch): 1/2; Minimum Operating Temperature: -50 Cel;
KAI-01050-CBA-FD-AE
IMAGE SENSOR,CCD; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Maximum Supply Voltage: 15.5 V; Minimum Operating Temperature: -50 Cel;
KAI-01050-FBA-JD-AE
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Additional Features: IT HAS SENSITIVITY OF 34 MICRO VOLT PER ELECTRON; Maximum Supply Voltage: 15.5 V; Termination Type: SOLDER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved