Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Latches and flip-flops are two types of electronic circuits used in digital systems to store and manipulate digital data. They are both sequential logic circuits, meaning that they can store information and use that information to make decisions based on the previous state.A latch is a type of digital circuit that can hold or "latch" a signal in its current state. It is a simple memory element that can store a single bit of information. A latch can be transparent or opaque, depending on its behavior when the clock signal is active. A transparent latch passes the input signal through to the output when the clock signal is active, while an opaque latch holds the input signal at the output when the clock signal is active.Flip-flops are similar to latches but are more sophisticated and have additional control inputs. A flip-flop is a digital circuit that can store one bit of information and change its state based on the clock signal and input signals. Flip-flops can be edge-triggered or level-triggered, depending on how they respond to the clock signal. Edge-triggered flip-flops change their state at the rising or falling edge of the clock signal, while level-triggered flip-flops change their state continuously as long as the clock signal is active.Flip-flops are classified into various types based on their behavior and the number of inputs. Some of the commonly used flip-flops include D flip-flops, JK flip-flops, T flip-flops, and SR flip-flops. D flip-flops have a single data input and a clock input and can store one bit of information. JK flip-flops have two inputs, J and K, and can store one bit of information. T flip-flops have a single input and can toggle between two states based on the clock signal. SR flip-flops have two inputs, S and R, and can store one bit of information.Latches and flip-flops are used in various applications, including digital signal processing, memory systems, and control circuits. They are essential components of digital systems and can be found in many electronic devices, such as computers, mobile phones, and digital cameras.
Add filters
All
Selected
MC10H131M
Onsemi
MC10H131M by Onsemi is a 2-bit latch with 1.7 ns propagation delay and max frequency of 250 MHz. It operates b/w 0-75 °C, ideal for high-speed applications in commercial settings. The ECL technology, small outline package, and surface mount capability make it versatile for various electronic designs.
10H
R-PDSO-G16
e4
10.2 mm
D FLIP-FLOP
250000000 Hz
2
1
16
75 Cel
0 Cel
COMPLEMENTARY
PLASTIC/EPOXY
SOP
SOP16,.3
RECTANGULAR
SMALL OUTLINE
RAIL
260
62 mA
1.7 ns
Not Qualified
2.05 mm
FF/Latches
YES
ECL
COMMERCIAL EXTENDED
NICKEL PALLADIUM GOLD
GULL WING
1.27 mm
DUAL
POSITIVE EDGE
5.275 mm
250 MHz
MC74HC74AFEL
D FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
HC/UH
R-PDSO-G14
50 pF
20000000 Hz
4 Amp
14
125 Cel
-55 Cel
SOP14,.3
TR
2/6
150 ns
6 V
2 V
3
CMOS
MILITARY
24 MHz
MC10H176MEL
MC10H176MEL by Onsemi is a 6-bit latch with 2.2 ns propagation delay, operating b/w 0-75 °C. It features positive edge trigger, ECL technology, and supports up to 250 MHz frequency. Ideal for high-speed applications in commercial electronics requiring small outline packages and surface mount capabilities.
6
TRUE
123 mA
2.2 ns
SN74SSTV16859DGG
Texas Instruments
SN74SSTV16859DGG by Texas Instruments is a 13-bit latch with a propagation delay of 2.8 ns, ideal for applications requiring fast data transfer. Operating at a supply voltage range of 2.3V to 2.7V, it features positive edge triggering and a max frequency of 200 MHz. This CMOS technology device comes in a small outline package suitable for commercial temperature grades.
SSTV
R-PDSO-G64
17 mm
13
64
70 Cel
TSSOP
TSSOP64,.32,20
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
2.5
2.8 ns
1.2 mm
Other Logic ICs
2.7 V
2.3 V
COMMERCIAL
.5 mm
6.1 mm
200 MHz
CD4099BMT
CD4099BMT by Texas Instruments is a CMOS latch/flip-flop with 400ns propagation delay at 5V. It has 16 terminals, operates b/w -55 to 125°C, and supports surface mount packaging. Ideal for military-grade applications requiring low-level trigger type and true output polarity.
LATCH ACTS AS 1-OF-8 DEMULTIPLEXER
4000/14000/40000
9.9 mm
D LATCH
SOP16,.25
5/15
400 ns
1.75 mm
18 V
3 V
5
30
LOW LEVEL
3.9 mm
CD74HC112PWT
CD74HC112PWT by Texas Instruments is a dual-function latches & flip-flops IC with 53ns propagation delay. It operates at a nominal voltage of 4.5V, has a load capacitance of 50pF, and can handle up to 6A max I (ol). Ideal for applications requiring negative edge trigger type in military-grade environments.
HC
5 mm
J-K FLIP-FLOP
6 Amp
TSSOP16,.25
.04 mA
265 ns
NO
4.5
.65 mm
NEGATIVE EDGE
4.4 mm
CD4042BDT
CD4042BDT by Texas Instruments is a 4-bit latch with 200ns propagation delay, suitable for military applications. It operates at 5V nominal voltage and has a load capacitance of 50pF. With negative edge trigger type, it offers complementary output polarity in a small outline package.
PROGRAMMABLE TRIGGER TYPE
2.4 Amp
4
.6 mA
500 ns
SN74ACT74MDREP
SN74ACT74MDREP by Texas Instruments is a dual-function latch with 14ns propagation delay, suitable for military-grade applications. It operates at a nominal voltage of 5V and has a max frequency of 85MHz. This CMOS technology flip-flop comes in a small outline package with surface mount capability.
DUMMY VAL
ACT
8.65 mm
85000000 Hz
24 Amp
SOP14,.25
.02 mA
14 ns
5.5 V
4.5 V
85 MHz
SN74LVC112APWT
SN74LVC112APWT by Texas Instruments is a dual-function latch with 4.8 ns propagation delay, suitable for automotive applications. Operating at 1.8V to 3.6V, it has a max frequency of 150 MHz and can handle load capacitance of 50 pF. This CMOS technology flip-flop has negative edge trigger type and operates b/w -40°C to 125°C temperature range.
LVC/LCX/Z
150000000 Hz
-40 Cel
3.3
.01 mA
7.1 ns
3.6 V
1.8
AUTOMOTIVE
150 MHz
SN74LVTH273IPWREP
SN74LVTH273IPWREP by Texas Instruments is an 8-bit latch with a propagation delay of 4.9 ns and operates at a nominal voltage of 3.3V. It features positive edge trigger type, suitable for industrial applications requiring high frequency operation up to 150 MHz in a compact small outline package.
LVT
R-PDSO-G20
6.5 mm
64 Amp
8
20
85 Cel
TSSOP20,.25
5.5 ns
BICMOS
INDUSTRIAL
CD74HC109MT
CD74HC109MT by Texas Instruments is a dual-function latches & flip-flops IC with 2 bits, operating at a supply voltage range of 2-6V. It features a propagation delay of 265ns, max frequency of 20MHz, and operates in temperatures ranging from -55 to 125°C. Ideal for military-grade applications requiring fast data processing and low power consumption.
J-KBAR FLIP-FLOP
23 MHz
CD74HC175MT
CD74HC175MT by Texas Instruments is a 4-bit latch with 16 terminals, operating at a supply voltage range of 2-6V. It features a propagation delay of 265ns, max frequency of 20MHz, and can handle load capacitance up to 50pF. Ideal for military-grade applications requiring positive edge triggering in compact designs.
CD74HC259MT
CD74HC259MT by Texas Instruments is an 8-bit latches & flip-flops IC with a propagation delay of 28ns. Operating b/w -55 to 125°C, it has a supply voltage range of 2-6V and load capacitance of 50pF. Ideal for military-grade applications due to its CMOS technology and small outline package style.
1:8 DMUX FOLLOWED BY LATCH
5.2 Amp
.08 mA
255 ns
Nickel/Palladium/Gold (Ni/Pd/Au)
NOT SPECIFIED
CD74HCT259MT
CD74HCT259MT by Texas Instruments is an 8-bit latches & flip-flops IC with a propagation delay of 49ns at 5V. It features a low-level trigger type, operates b/w -55°C to 125°C, and has a max power supply current of 0.08mA. Ideal for military-grade applications requiring fast data storage and retrieval.
HCT
57 ns
SN74HC174DT
SN74HC174DT by Texas Instruments is a 6-bit latch with a supply voltage of 2-6V, operating temperature range of -40 to 85°C, and propagation delay of 200ns. It is used in industrial applications requiring true output polarity and positive edge triggering, with a max frequency of 25MHz at nominal voltage.
25000000 Hz
200 ns
29 MHz
MAX9381ESA-T
Maxim Integrated
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ECL MODE OPERATING RANGE:VEE=-2.25 TO -5.5V
9381
R-PDSO-G8
e0
4.9 mm
405 ns
2.25 V
BIPOLAR
TIN LEAD
3000 MHz
MAX9381EUA-T
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
S-PDSO-G8
3 mm
SQUARE
1.1 mm
MC100E131FNG
MC100E131FNG by Onsemi is a 4-bit latch with 0.675 ns propagation delay, operating at up to 1.1 GHz frequency. It has a supply voltage range of 4.2V to 5.7V and is ideal for high-speed applications requiring positive edge triggering in ECL technology.
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
100E
S-PQCC-J28
e3
11.505 mm
1000000000 Hz
28
OPEN-EMITTER
QCCJ
LDCC28,.5SQ
CHIP CARRIER
-4.5
81 mA
.675 ns
4.57 mm
5.7 V
4.2 V
OTHER
MATTE TIN
J BEND
QUAD
1100 MHz
MC100E131FNR2G
MC100E131FNR2G by Onsemi is a 4-bit ECL latch with 0.675 ns propagation delay. Operating at -4.5 to 5 V, it has a max frequency of 1.1 GHz and trigger type as positive edge for high-speed applications in electronics.
MC100EP451FAG
MC100EP451FAG by Onsemi is a 6-bit ECL latch with 0.55 ns propagation delay, operating at -40 to 85°C. It features positive edge trigger, complementary output polarity, and supports up to 3GHz frequency. Ideal for industrial applications requiring high-speed data processing in a compact square package.
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V
RIGHT
S-PQFP-G32
7 mm
3000000000 Hz
32
LQFP
QFP32,.35SQ,32
FLATPACK, LOW PROFILE
.55 ns
1.6 mm
Shift Registers
.8 mm
MC100LVEL29DWG
MC100LVEL29DWG by Onsemi is a dual-function latch with 0.7ns propagation delay, operating at -40 to 85°C. Ideal for industrial applications, it has a max fmax of 1100MHz and operates on a nominal voltage of 3.3V.
NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V
100LVEL
12.8 mm
SOP20,.4
-3.3
.7 ns
2.65 mm
3.8 V
7.5 mm
MC10H130PG
MC10H130PG by Onsemi is a 2-bit latch with 1.7ns propagation delay, ideal for ECL technology applications. It features low-level trigger type, operates b/w 0-75 °C, and has an output polarity of complementary. The package style is in-line with 16 terminals and a rectangular shape made of plastic/epoxy material.
R-PDIP-T16
19.175 mm
DIP
DIP16,.3
IN-LINE
4.44 mm
TIN
THROUGH-HOLE
2.54 mm
7.62 mm
MC10H131PG
MC10H131PG by Onsemi is a 2-bit latch with 16 terminals and 1.7 ns propagation delay. It operates b/w 0-75°C, has a max frequency of 250 MHz, and uses ECL technology. Ideal for applications requiring positive edge trigger and complementary output polarity in commercial extended temperature environments.
MC10H135PG
MC10H135PG by Onsemi is a 2-bit latch with 16 terminals, operating at -40 to 85 °C. It features a propagation delay of 2.6 ns and max frequency of 250 MHz. Ideal for high-speed applications in commercial electronics due to its ECL technology and positive edge trigger type.
JBAR-KBAR FLIP-FLOP
75 mA
2.6 ns
Tin (Sn)
MC10H175PG
MC10H175PG by Onsemi is a 5-bit latches & flip-flops IC with 2.4ns propagation delay at 2V, suitable for ECL technology applications. It features low-level trigger type, operates b/w 0-75 °C, and has a max power supply current of 107mA.
107 mA
2 ns
MC14042BCPG
MC14042BCPG by Onsemi is a 4-bit latch with 440 ns propagation delay at 5V. It has a package style of IN-LINE and operates in temperatures ranging from -55 to 125 °C. Ideal for military-grade applications requiring high-level trigger type and complementary output polarity.
440 ns
HIGH LEVEL
MC14043BCPG
MC14043BCPG by Onsemi is a 4-bit latches & flip-flops IC with 350 ns propagation delay at 5V. It has a package style of IN-LINE and operates b/w -55 to 125 °C. Ideal for military-grade applications requiring high-level trigger type and true output polarity.
R-S LATCH
3-STATE
350 ns
MC14044BCPG
MC14044BCPG by Onsemi is a 4-bit latch with 350 ns propagation delay at 5V. It has a true output polarity, operates b/w -55 to 125 °C, and is ideal for military-grade applications requiring low-level trigger type.
MC14076BCPG
MC14076BCPG by Onsemi is a 4-bit latch with 600 ns propagation delay, operating at -55 to 125 °C. It has a supply voltage of 3-18 V and can handle load capacitance of 50 pF. Ideal for military-grade applications requiring TRUE output polarity and POSITIVE EDGE triggering.
1800000 Hz
600 ns
40
6 MHz
MC14099BCPG
MC14099BCPG by Onsemi is a CMOS latch with a propagation delay of 400 ns and a load capacitance of 50 pF. It is commonly used in military applications due to its temperature grade and through-hole terminal form.
MC14175BCPG
MC14175BCPG by Onsemi is a 4-bit latch with 400 ns propagation delay, operating at -55 to 125 °C. It has a supply voltage of 5V, load capacitance of 50 pF, and can handle frequencies up to 2MHz. Ideal for military-grade applications requiring positive edge triggering in CMOS technology.
2000000 Hz
6.5 MHz
MC14598BCPG
MC14598BCPG by Onsemi is an 8-bit latch with 160ns propagation delay, operating at 5V. It features a 3-STATE output and HIGH LEVEL trigger type, suitable for MILITARY applications. With a package size of 22.73mm x 7.62mm x 4.57mm, it has through-hole terminals and can handle up to 18V supply voltage.
R-PDIP-T18
22.73 mm
1.2 Amp
18
DIP18,.3
320 ns
MC74HC74ANG
MC74HC74ANG by Onsemi is a dual-function latches & flip-flops IC with 14 terminals. It operates at a nominal voltage of 3V and has a max frequency of 20MHz. With positive edge trigger type, it finds application in military-grade systems requiring fast propagation delay of 150ns.
R-PDIP-T14
18.86 mm
DIP14,.3
4.69 mm
MC10EP451FAG
MC10EP451FAG by Onsemi is a 6-bit ECL latch with 0.55 ns propagation delay. It operates at -40 to 85°C, ideal for industrial applications. With a max frequency of 3GHz and Vsup range of 3-5.5V, it's suitable for high-speed digital systems.
10E
-5.2
MC74ACT273NG
MC74ACT273NG by Onsemi is an 8-bit latch with a 5V supply, 50pF load capacitance, and 12ns propagation delay. It is used in industrial applications for positive edge triggering at frequencies up to 125MHz.
R-PDIP-T20
26.415 mm
125000000 Hz
DIP20,.3
12 ns
125 MHz
SN74LV74AQPWRQ1
SN74LV74AQPWRQ1 by Texas Instruments is a dual-function latches & flip-flops IC with 18ns propagation delay at 2.5V, suitable for automotive applications. It operates at a max frequency of 45MHz, has a load capacitance of 50pF, and can handle up to 6A output current.
LV/LV-A/LVX/H
45000000 Hz
TSSOP14,.25
23 ns
AEC-Q100
75 MHz
SN74LVC74AQDRQ1
SN74LVC74AQDRQ1 by Texas Instruments is a dual-function latches & flip-flops IC with 5.2ns propagation delay at 3.3V, suitable for automotive applications due to AEC-Q100 screening level. It features complementary output polarity, operates b/w -40°C to 125°C, and has a max frequency of 100MHz at 3.6V supply voltage.
100000000 Hz
6 ns
2.7
100 MHz
MC14013BCPG
MC14013BCPG by Onsemi is a CMOS Latches & Flip-Flops IC with 2 functions, 350 ns propagation delay at 5V. It operates in the temperature range of -55 to 125 °C and has a max frequency of 2MHz. Ideal for military-grade applications requiring positive edge triggering and complementary output polarity.
7 MHz
MC14027BDG
MC14027BDG by Onsemi is a CMOS latch/flip-flop with 2 functions, operating at 5V. It has a propagation delay of 350ns and can handle load capacitance of 50pF. Ideal for military applications due to its temperature grade and small outline package style.
1500000 Hz
MC14099BDWG
MC14099BDWG by Onsemi is a CMOS latch with 16 terminals, operating at -55 to 125 °C. It has a propagation delay of 400 ns at 5V, suitable for military-grade applications. The small outline package is surface-mountable and features low-level trigger type.
10.3 mm
SOP16,.4
MC14042BDG
MC14042BDG by Onsemi is a 4-bit latch with 440 ns propagation delay at 5V. It operates in temperatures from -55 to 125 °C, suitable for military-grade applications. With a small outline package and surface mount capability, it's ideal for compact electronic designs.
MC74LVX74MG
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
50000000 Hz
22 ns
80 MHz
MC100EL31DG
MC100EL31DG by Onsemi is a ECL latch with 0.59 ns propagation delay, 5V supply voltage, and 2200 MHz fmax. Ideal for industrial applications requiring fast signal processing in a compact small outline package.
100EL
SOP8,.25
TUBE
37 mA
.59 ns
2200 MHz
SN74AHC273PWRG4
SN74AHC273PWRG4 by Texas Instruments is an 8-bit latch with a propagation delay of 12.5 ns, suitable for automotive applications. It operates at a supply voltage range of 2-5.5 V and has a max frequency of 70 MHz, making it ideal for high-speed data storage in compact designs. With surface mount capability and small outline packaging, this CMOS technology-based device offers efficient performance in tight spaces.
AHC/VHC/H/U/V
70000000 Hz
8 Amp
2/5.5
19.5 ns
SN74AUC1G79DCKRG4
SN74AUC1G79DCKRG4 by Texas Instruments is a latches & flip-flops IC with 3.9 ns propagation delay, operating at 1.2V. It features a small outline package, 5 terminals, and can handle up to 9 Amps output current. Ideal for applications requiring positive edge triggering and true output polarity in industrial settings with temperatures ranging from -40 to 85°C.
AUC
R-PDSO-G5
2 mm
15 pF
200000000 Hz
9 Amp
TSSOP5/6,.08
1.2/2.5
3.9 ns
.8 V
1.2
1.25 mm
275 MHz
SN74AUC1G80DCKRG4
SN74AUC1G80DCKRG4 by Texas Instruments is a latches & flip-flops IC with 3.9 ns propagation delay at 1.2V, suitable for industrial applications. It features a small outline package with 5 terminals and operates b/w -40 to 85°C, offering a max frequency of 200MHz.
INVERTED
SN74LV273APWRG4
SN74LV273APWRG4 by Texas Instruments is an 8-bit latch with a propagation delay of 21 ns and operates at a nominal voltage of 3.3V. It is designed for automotive applications, featuring positive edge trigger type and a max frequency of 45 MHz. This CMOS technology flip-flop has a compact small outline package with surface mount capability.
12 Amp
TR, 13 INCH
27 ns
MC10EP51DTR2G
MC10EP51DTR2G by Onsemi is a ECL technology latch with 0.37 ns propagation delay, 3.3V nominal voltage, and 3000000000 Hz max frequency. It is used in industrial applications requiring positive edge trigger and complementary output polarity.
TSSOP8,.19
47 mA
.37 ns
© 2023 All rights reserved
