Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMUN2232T1G by Onsemi is a NPN BJT transistor with max. collector-emitter voltage of 50V, ideal for switching applications. It features single configuration with built-in resistor and small outline package style. With max power dissipation of 0.338W, it is suitable for surface mount designs requiring low DC current gain (hFE) of 15.
Median Price
$0.031
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Arrow
1+ parts
$0.009
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$0.210
$0.077
$0.050
$0.037
Newark
$0.043
Chip1Stop
$0.027
Verical
Rochester
$0.023
$0.020
DigiKey
$0.035
Maritex
$0.016
Digiode
$0.024
Chip Stock
IBS Electronics
NAC Semi
Vyrian
Nova Conductors
Ampacity Inc.
$0.021
Corphita
$0.022
Corohmni
$0.025
Component Stockers USA
$0.030
Aztec Data Supply Inc.
$0.948
Authorized Procurement Solutions
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Argo Parts USA
Kepictronics
Continental Prestige Electronics
Aranea Global
Problanco Electronics
UHIMA Technologies
Provides good thermal performance and electrical insulation, making the transistor reliable and durable.
NPN transistors are commonly used in amplification and switching circuits, offering good performance and efficiency.
The built-in resistor simplifies circuit design and saves space on the PCB, making it convenient for applications.
Designed specifically for switching applications, ensuring fast and efficient operation in various electronic circuits.
Surface mount packaging allows for easy and efficient PCB assembly, reducing manufacturing costs and improving overall product reliability.
Rectangular shape provides easy handling and placement on the PCB, optimizing space and improving overall circuit layout.
Gull wing terminals offer reliable soldering connections and are suitable for automated assembly processes, ensuring high quality and consistency.
With a high power dissipation rating, the transistor can handle elevated power levels without overheating, ensuring long-term reliability.
Having a minimum hFE of 15 ensures consistent and reliable amplification of the input signal, suitable for various applications.
The maximum voltage rating of 50 V makes it suitable for low to medium voltage circuits, offering versatility and compatibility.
Silicon transistors provide high performance, reliability, and efficiency, making them ideal for a wide range of applications.
With a maximum collector current rating of 0.1 A, the transistor can handle moderate current levels, suitable for various circuit requirements.
Matte tin finish offers good solderability and corrosion resistance, ensuring reliable and long-lasting connections in the circuit.
Dual terminal positions provide flexibility in circuit design and layout, accommodating different PCB configurations and applications.
Small Signal Bipolar Junction Transistors (BJT) SMUN2232T1G attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Onsemi
Additional Features:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
SMUN2232T1G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Change of wire bonding 21/Jul/2023
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
Digitron Semiconductors
BC817-40
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e3; No. of Elements: 1;
2N2219A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb);
Zetex Plc
BC817-25
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Terminal Form: GULL WING; Maximum Collector-Emitter Voltage: 45 V;
KSP13TA
Fairchild Semiconductor
NPN; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 125 MHz; Maximum Collector Current (IC): .5 A; Minimum DC Current Gain (hFE): 10000;
BC807-25,215
Nexperia
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Maximum Time At Peak Reflow Temperature (s): 30;
SBC817-40LT3G
Onsemi
SBC817-40LT3G by Onsemi is a NPN BJT transistor with 250 min hFE, 45V VCEO, and 100MHz fT. Ideal for switching applications, it has a max power dissipation of 0.3W and operates up to 150°C. Suitable for surface mount designs with Gull Wing terminals in a small outline package.
2N3904
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A;
BC846BW,115
BC846BW,115 by NXP Semiconductors is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 65V and a max collector current of 0.1A. It is commonly used for switching applications due to its low VCEsat of 0.6V and high DC current gain (hFE) of 200.
BC847C-13-F
Diodes Inc. BC847C-13-F is a NPN BJT transistor with max. power dissipation of 0.35W, hFE of 420, and fT of 300MHz. Ideal for switching applications in automotive electronics due to AEC-Q101 standard compliance and max. collector-emitter voltage of 45V.
BC847C
Taiwan Semiconductor
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .1 A; Transistor Element Material: SILICON;
2N3906
Solid State Devices
PNP; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .2 A; Maximum Collector-Emitter Voltage: 40 V; No. of Elements: 1;
2N2905A
Space Power Electronics
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .6 W; Maximum Collector Current (IC): .6 A;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY;
BC547BTA
BC547BTA by Onsemi is a NPN BJT transistor with max. power dissipation of 0.625W, hFE of 200, and fT of 300MHz. Ideal for switching applications due to its max. collector-emitter voltage of 45V and max. collector current of 0.1A in a cylindrical package style.
MMBT2222A
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): 1 A;
BC847-C
Samsung
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .1 A; No. of Terminals: 3;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; Minimum DC Current Gain (hFE): 35;
2N2907AUB
Microsemi
PNP; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.16 W; Maximum Collector Current (IC): .6 A; Package Style (Meter): SMALL OUTLINE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SMUN5311DW1T1G
SMUN5311DW1T1G by Onsemi is a Small Signal BJT with NPN and PNP channels, ideal for switching applications. It features 2 elements with built-in resistors, a max collector-emitter voltage of 50V, and a min DC current gain of 35 (hFE). This surface-mount transistor has a package style of small outline and terminal finish in matte tin.
SMUN5211T1G
SMUN5211T1G by Onsemi is a NPN BJT with built-in resistor for switching applications. It has hFE of 35, VCE of 50V, and IC of 0.1A. The package is small outline with gull wing terminals, suitable for surface mount assembly.
SMUN5211DW1T1G
SMUN5211DW1T1G by Onsemi is a NPN BJT transistor with 2 elements and built-in resistor. It has a max collector-emitter voltage of 50V, max collector current of 0.1A, and min DC current gain of 35. Ideal for switching applications, it comes in a small outline package with gull wing terminals for surface mount assembly.
SMUN5214T1G
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .31 W; Maximum Collector Current (IC): .1 A; Terminal Position: DUAL;
SMUN5235DW1T1G
SMUN5235DW1T1G by Onsemi is a NPN BJT transistor with VCEsat of 0.25V, hFE of 80, and IC of 0.1A. Ideal for switching applications, it has a max operating temp of 150°C and peak reflow temp of 260°C. This small outline package with gull wing terminals is AEC-Q101 compliant.
SMUN5314DW1T1G
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .256 W; Maximum Collector Current (IC): .1 A; Terminal Finish: MATTE TIN;
SMUN5233T1G
NPN; Surface Mount: YES; Maximum Power Dissipation (Abs): .31 W; Maximum Collector Current (IC): .1 A; Transistor Element Material: SILICON; Maximum Time At Peak Reflow Temperature (s): 30;
SMUN5313DW1T1G
SMUN5313DW1T1G by Onsemi is a Small Signal BJT with NPN and PNP types, 2 elements with built-in resistor. It has max. collector-emitter voltage of 50V, operating temp. range -55 to 150°C, and peak reflow temp. of 260°C. Ideal for automotive applications meeting AEC-Q101 standard.
SMUN5335DW1T1G
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .256 W; Maximum Collector Current (IC): .1 A; Terminal Position: DUAL;
SMUN2211T1G
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .338 W; Maximum Collector Current (IC): .1 A; Moisture Sensitivity Level (MSL): 1;
SMUN5233DW1T1G
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .256 W; Maximum Collector Current (IC): .1 A; Package Style (Meter): SMALL OUTLINE;
SMUN5214DW1T1G
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .256 W; Maximum Collector Current (IC): .1 A; Package Shape: RECTANGULAR;
SMUN5111T1G
SMUN5111T1G by Onsemi is a PNP BJT transistor with a built-in resistor for switching applications. It has a max collector-emitter voltage of 50V, max collector current of 0.1A, and min DC current gain of 35. This surface-mount device comes in a small outline package with gull wing terminals, making it suitable for compact electronic designs.
SMUN5111DW1T1G
SMUN5111DW1T1G by Onsemi is a PNP BJT transistor with 2 elements, built-in resistor, and max. collector-emitter voltage of 50V. Ideal for switching applications in automotive electronics due to AEC-Q101 standard compliance and small outline package style. Features include hFE of 35, IC of 0.1A, and power dissipation of 0.385W.
SMUN5212T1G
NPN; Surface Mount: YES; Maximum Power Dissipation (Abs): .31 W; Maximum Collector Current (IC): .1 A; JESD-609 Code: e3; No. of Elements: 1;
SMUN2211T3G
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .338 W; Maximum Collector Current (IC): .1 A; JESD-30 Code: R-PDSO-G3;
SMUN2113T1
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Collector Current (IC): .1 A; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
SMUN2212T1G
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .338 W; Maximum Collector Current (IC): .1 A; Transistor Element Material: SILICON;
SMUN2212T3
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Collector Current (IC): .1 A; No. of Terminals: 3; Terminal Form: GULL WING;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved