Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMUN2113T1 by Onsemi is a PNP BJT with 80 min hFE, 50V VCE, and 0.1A IC. It's used for switching applications in surface mount designs due to its single configuration with built-in resistor. The transistor element is made of silicon and the package style is small outline rectangular with Gull Wing terminals.
Median Price
$0.035
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.030
1k+ parts
$0.025
10k+ parts
$0.023
DigiKey
$0.040
Verical
Digiode
$0.024
Vyrian
Chip Stock
Corphita
$0.022
Corohmni
Continental Prestige Electronics
$0.016
QUARKTWIN TECHNOLOGY LTD
Kulean Microsystems
TANS Electronics
Problanco Electronics
SupplyDigital Components
UHIMA Technologies
Plastic/Epoxy material is lightweight, durable, and cost-effective, making the transistor easy to handle and suitable for various applications.
PNP transistors are known for their low power consumption and high efficiency, making them ideal for switching applications.
The built-in resistor simplifies circuit design and saves space on the PCB, making this transistor a convenient option for compact electronic devices.
Designed specifically for switching applications, this transistor can effectively control the flow of current in electronic circuits with high precision and speed.
Being surface mountable, this transistor can be easily integrated into densely populated PCB designs, saving space and facilitating automated assembly processes.
The rectangular shape of the package provides stability during soldering and ensures proper alignment on the PCB, enhancing the overall reliability of the transistor.
With three terminals, this transistor offers flexibility in connecting to other components and allows for versatile circuit configurations.
The high minimum DC current gain ensures consistent and reliable performance, making this transistor suitable for precision applications that require stable amplification.
The high maximum collector-emitter voltage rating allows for safe operation in circuits with higher voltage levels, improving the overall reliability of the transistor.
Silicon transistors offer excellent thermal stability, high breakdown voltage, and low leakage current, ensuring long-term reliability and performance in various operating conditions.
With a maximum collector current of 0.1 A, this transistor can handle moderate current loads, making it suitable for applications that require efficient current switching.
The tin/lead terminal finish provides good solderability and ensures reliable electrical connections, making it easier to integrate this transistor into electronic assemblies.
The dual terminal position allows for easy and secure mounting on the PCB, ensuring proper electrical connections and mechanical stability in the circuit.
With a maximum reflow time of 30 seconds at peak temperature, this transistor can withstand standard soldering processes without any performance degradation or damage.
The high peak reflow temperature of 235 °C ensures reliable solder joints and optimal thermal performance during the soldering process, enhancing the overall durability of the transistor.
Small Signal Bipolar Junction Transistors (BJT) SMUN2113T1 attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Onsemi
Additional Features:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
SMUN2113T1 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1554216004
Molex
WIRE AND CABLE;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Alpha & Omega Semiconductor
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
Vishay Telefunken
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
08055C104KAT2A
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
BC847B
Unisonic Technologies
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .31 W; Maximum Collector Current (IC): .1 A;
SMMBT3906LT1G
SMMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and IC of 0.2A. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance, 260°C peak reflow temp, and 250MHz fT.
2N2219A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Turn On Time (ton): 35 ns;
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
BCP56-16,115
Nexperia
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 180 MHz; Maximum Collector Current (IC): 1 A; Transistor Element Material: SILICON;
BC817-25
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Minimum DC Current Gain (hFE): 160;
BC847BV,115
BC847BV,115 by NXP Semiconductors is a NPN BJT with 2 elements for switching applications. Features include hFE of 200, VCE of 45V, and IC of 0.1A. It comes in a small outline package suitable for surface mount technology.
Vishay Semiconductors
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .1 A; Terminal Form: GULL WING;
BC547C
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 150 MHz; Maximum Collector Current (IC): .1 A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
2N2222ACSM
Tt Electronics Plc
2N2222ACSM by Tt Electronics Plc is a NPN BJT transistor with hFE of 30, Vce of 50V, and fT of 300MHz. Ideal for switching applications due to its fast ton of 35ns and toff of 300ns. Suitable for surface mount designs with small outline package style.
Rectron
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Transistor Element Material: SILICON;
BC807-25,215
BC807-25,215 by NXP Semiconductors is a PNP BJT transistor for switching applications. It has a VCEsat of 0.7V, hFE of 160, and IC of 0.5A. With a max operating temperature of 150°C, it is ideal for small outline packages in surface mount configurations.
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 200; No. of Terminals: 3;
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A;
BC847C
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .1 A; Peak Reflow Temperature (C): 260;
MMBT2222A
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 270 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .6 A;
BC547B
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .1 A; Package Shape: ROUND;
Formosa Microsemi
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .1 A; Package Style (Meter): SMALL OUTLINE;
BC847CLT1G
BC847CLT1G by Onsemi is a NPN BJT transistor with VCEsat of 0.6V, hFE of 420, and fT of 100MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SMUN5311DW1T1G
SMUN5311DW1T1G by Onsemi is a Small Signal BJT with NPN and PNP channels, ideal for switching applications. It features 2 elements with built-in resistors, a max collector-emitter voltage of 50V, and a min DC current gain of 35 (hFE). This surface-mount transistor has a package style of small outline and terminal finish in matte tin.
SMUN5211T1G
SMUN5211T1G by Onsemi is a NPN BJT with built-in resistor for switching applications. It has hFE of 35, VCE of 50V, and IC of 0.1A. The package is small outline with gull wing terminals, suitable for surface mount assembly.
SMUN5211DW1T1G
SMUN5211DW1T1G by Onsemi is a NPN BJT transistor with 2 elements and built-in resistor. It has a max collector-emitter voltage of 50V, max collector current of 0.1A, and min DC current gain of 35. Ideal for switching applications, it comes in a small outline package with gull wing terminals for surface mount assembly.
SMUN5214T1G
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .31 W; Maximum Collector Current (IC): .1 A; Terminal Position: DUAL;
SMUN5235DW1T1G
SMUN5235DW1T1G by Onsemi is a NPN BJT transistor with VCEsat of 0.25V, hFE of 80, and IC of 0.1A. Ideal for switching applications, it has a max operating temp of 150°C and peak reflow temp of 260°C. This small outline package with gull wing terminals is AEC-Q101 compliant.
SMUN5314DW1T1G
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .256 W; Maximum Collector Current (IC): .1 A; Terminal Finish: MATTE TIN;
SMUN5233T1G
NPN; Surface Mount: YES; Maximum Power Dissipation (Abs): .31 W; Maximum Collector Current (IC): .1 A; Transistor Element Material: SILICON; Maximum Time At Peak Reflow Temperature (s): 30;
SMUN5313DW1T1G
SMUN5313DW1T1G by Onsemi is a Small Signal BJT with NPN and PNP types, 2 elements with built-in resistor. It has max. collector-emitter voltage of 50V, operating temp. range -55 to 150°C, and peak reflow temp. of 260°C. Ideal for automotive applications meeting AEC-Q101 standard.
SMUN5335DW1T1G
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .256 W; Maximum Collector Current (IC): .1 A; Terminal Position: DUAL;
SMUN2211T1G
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .338 W; Maximum Collector Current (IC): .1 A; Moisture Sensitivity Level (MSL): 1;
SMUN5233DW1T1G
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .256 W; Maximum Collector Current (IC): .1 A; Package Style (Meter): SMALL OUTLINE;
SMUN5214DW1T1G
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .256 W; Maximum Collector Current (IC): .1 A; Package Shape: RECTANGULAR;
SMUN5111T1G
SMUN5111T1G by Onsemi is a PNP BJT transistor with a built-in resistor for switching applications. It has a max collector-emitter voltage of 50V, max collector current of 0.1A, and min DC current gain of 35. This surface-mount device comes in a small outline package with gull wing terminals, making it suitable for compact electronic designs.
SMUN2232T1G
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .338 W; Maximum Collector Current (IC): .1 A; Terminal Finish: Matte Tin (Sn) - annealed;
SMUN5111DW1T1G
SMUN5111DW1T1G by Onsemi is a PNP BJT transistor with 2 elements, built-in resistor, and max. collector-emitter voltage of 50V. Ideal for switching applications in automotive electronics due to AEC-Q101 standard compliance and small outline package style. Features include hFE of 35, IC of 0.1A, and power dissipation of 0.385W.
SMUN5212T1G
NPN; Surface Mount: YES; Maximum Power Dissipation (Abs): .31 W; Maximum Collector Current (IC): .1 A; JESD-609 Code: e3; No. of Elements: 1;
SMUN2211T3G
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .338 W; Maximum Collector Current (IC): .1 A; JESD-30 Code: R-PDSO-G3;
SMUN2212T1G
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .338 W; Maximum Collector Current (IC): .1 A; Transistor Element Material: SILICON;
SMUN2212T3
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Collector Current (IC): .1 A; No. of Terminals: 3; Terminal Form: GULL WING;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved