Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BC817-25LT1G by Onsemi is a NPN BJT with 160 min hFE, 45V VCEO, and 100MHz fT. Ideal for small signal applications in electronics due to its compact SMALL OUTLINE package and high transition frequency. Suitable for surface mount designs requiring low power dissipation and moderate collector current.
Median Price
$0.029
Lifecycle Status
Suppliers In-Stock
58
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.055
100+ parts
-
1k+ parts
10k+ parts
Newark
$0.175
$0.067
$0.042
Mouser Electronics
$0.210
$0.074
$0.047
$0.041
EBV Elektronik
Avnet
Arrow
Chip1Stop
$0.019
Verical
Master Electronics
$0.039
Farnell
$0.015
Future Electronics
$0.017
Element14
$0.054
$0.053
Rochester
$0.022
$0.018
$0.016
Freelance Electronics
$0.020
EXC GmbH
Digiode
$0.024
Bristol Electronics
$0.084
$0.011
TME
$0.090
$0.035
$0.014
Maritex
$0.243
$0.050
$0.030
$0.023
American Microsemiconductor Inc.
$0.380
Component Electronics Inc.
$0.770
$0.580
$0.500
Nova Conductors
$1.000
NAC Semi
$0.036
Chip Stock
K-1 Technologies
Vyrian
Sternenhof Electronics
IBS Electronics
Electro Sonic
Cyclops Electronics Ltd
Flip Electronics
Diverse Electronics
Freddi Giovanni
Dan-Mar Components
LWI Electronics Inc
EMSNET
Micros
Partservice
$0.116
Ashlea Components Ltd
LIBRA Elektronik GmbH
Prism Electronics
Martec Srl
Sea View Technologies
Cogito LLC
Connect4Technologies Inc.
A&K Electronics
Rotakorn
NPI Materials, Inc.
Rebound Electronics
Classic Components Corporation
Sensible Micro Corp
VNN
ComSIT Distribution GmbH
ComSIT USA
Bas Electronics GmbH & Co. KG
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
PC Components Company LLC
Semicontronic
$0.009
Ampacity Inc.
Corphita
Argo Parts USA
$0.043
Modulus Dynamics
Corohmni
Advanced Electronics
$0.354
$0.322
$0.290
Aranea Global
$0.980
$0.941
Aztec Data Supply Inc.
$1.215
Perfect Parts
GreenTree Electronics
Kepictronics
RC Electronics
$0.040
Continental Prestige Electronics
$0.044
$0.031
Eastek
Lucentia Tech
iodParts Technologies Inc.
Robosynatics
Akira Global LLC
Lixinc
TANS Electronics
Kulean Microsystems
Glotronic Ltd.
Cyclops Electronics Ltd (Excess)
Eliminating Global Boundries, Inc
Futuretech Components
A-Z Elektronik GmbH
SupplyDigital Components
Computer Components Inc. - USA
Assy Fe
Alle Elektronik GmbH
Problanco Electronics
UHIMA Technologies
Durable and lightweight material for reliable performance.
Commonly used type for general purpose amplification.
Simplifies circuit design for easier integration.
Easy to mount on PCB for space-saving and efficient assembly.
Standard shape for compatibility with existing designs.
Provides secure and reliable connection to the PCB.
Simple interface for easy connection to other components.
Handles moderate power levels for versatile use.
Compact design for space-constrained applications.
High gain amplification for signal processing.
Handles high temperatures for extended reliability.
Suitable for low to moderate voltage applications.
Offers efficient and reliable performance.
Operates in extreme cold conditions for flexibility.
Handles moderate current levels for various applications.
Corrosion-resistant finish for long-lasting performance.
Simplifies PCB layout for ease of use.
Ensures proper solder reflow for reliable connections.
Withstands high reflow temperatures for secure solder joints.
High frequency capability for fast signal processing.
Small Signal Bipolar Junction Transistors (BJT) BC817-25LT1G attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Onsemi
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Element Material:
Nominal Transition Frequency (fT):
BC817-25LT1G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.21.00.95
SB
8541.21.00.80
PCN Design/Specification - Copper Wire Update 10/Sep/2015 SOT23 16/Sep/2016
PCN Assembly/Origin - Wafer Source Addition 26/Nov/2014
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
ROHM
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N3904
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A;
BC846A,215
NXP Semiconductors
BC846A,215 by NXP Semiconductors is a NPN BJT transistor for switching applications. It has a max VCEsat of 0.6V and a min DC current gain of 110 (hFE). With a max operating temperature of 150°C, it is suitable for small outline surface mount packages.
MMBT2907A
General Semiconductor
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
2N2222AUBC
2N2222AUBC by Microchip is a NPN transistor with max collector-emitter voltage of 50V and max current of 0.8A. It has a min DC current gain of 30, ideal for switching applications. With a small outline package style and ceramic-metal sealed body, it's suitable for surface mount designs.
BC847BLT3G
BC847BLT3G by Onsemi is a small signal NPN bipolar junction transistor with a max collector-emitter voltage of 45V and a min DC current gain of 200. It is commonly used in applications such as amplifiers, switches, and general-purpose circuits.
2N2219A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .8 W; Maximum Collector Current (IC): .8 A;
BC547C
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 420;
BC817.40
BC817.40 by Central Semiconductor is a NPN small signal bipolar junction transistor (BJT) with a max collector-emitter voltage of 45V and a max collector current of 0.5A. It has a min DC current gain of 250 and can operate at temperatures up to 150°C. This transistor is commonly used in various electronic applications requiring low power dissipation and high frequency performance, such as amplifiers and switching circuits.
2N2905A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .6 A; Package Body Material: METAL; Maximum Turn Off Time (toff): 300 ns;
BC817-16LT1G
BC817-16LT1G by Onsemi is a NPN BJT transistor with 3 terminals and a max power dissipation of 0.3W. It has a min DC current gain of 100, operates at temperatures up to 150°C, and can handle a max collector-emitter voltage of 45V. This small outline transistor is ideal for applications requiring high frequency transitions up to 100MHz in surface mount configurations.
MMBT2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
BC817-40
Formosa Microsemi
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .5 A;
2N3906
Motorola
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .2 A; JEDEC-95 Code: TO-92;
2N2907AUB
Semicoa
PNP; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .4 W; Maximum Collector Current (IC): .6 A; Maximum Turn Off Time (toff): 300 ns;
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 3 W; Maximum Collector Current (IC): .8 A;
BC807-40-7-F
BC807-40-7-F by Diodes Inc. is a PNP BJT transistor with 3 terminals, hFE of 170, and max IC of 0.5A. Ideal for switching applications, it has a max VCE of 45V and operates up to 150°C. This surface-mount device in a small outline package is made of silicon with matte tin finish.
Lite-on Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .1 A; Maximum Turn On Time (ton): 70 ns;
Panjit International
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
MBT3904DW1T1G
MBT3904DW1T1G by Onsemi is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V. It has a min DC current gain of 30 and can handle a max collector current of 0.2A. This transistor is commonly used in amplifier applications due to its high transition frequency of 300MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BC817,215
Nexperia
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Maximum Time At Peak Reflow Temperature (s): 30;
BC817,215 by NXP Semiconductors is a NPN BJT transistor with VCEsat of 0.7V and hFE of 100. Ideal for switching applications, it has a max IC of 0.5A and operates at temperatures up to 150°C. With a package style of small outline, it is surface mountable with GULL WING terminals.
BC817-40LT1G
BC817-40LT1G by Onsemi is a NPN BJT with 45V VCEO, 0.5A IC, and 100MHz fT. Ideal for small signal applications in electronics due to its high hFE of 250 and compact SOT-23 package. Operating temperature range from -55°C to 150°C makes it suitable for various environments.
BC817-25W,115
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Package Shape: RECTANGULAR;
NXP Semiconductors' BC817-25W,115 is a NPN BJT transistor with VCEsat of 0.7V and hFE of 160. Ideal for switching applications, it has a max IC of 0.5A and operates up to 150°C. With a compact small outline package, it features GULL WING terminals for surface mount assembly.
BC817-40,215
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; JEDEC-95 Code: TO-236AB;
NXP Semiconductors' BC817-40,215 is a NPN BJT transistor with VCEsat of 0.7V and hFE of 250. Ideal for switching applications, it has a max IC of 0.5A and operates up to 150°C. The GULL WING terminal form and small outline package make it suitable for surface mount designs.
BC817-40W-7
BC817-40W-7 by Diodes Inc. is a NPN BJT transistor with 170 min hFE, 45V VCEO, and 100MHz fT. Ideal for switching applications, it has a 0.2W power dissipation in a small outline package suitable for surface mount technology.
BC817-25,215
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDSO-G3;
NXP Semiconductors' BC817-25,215 is a NPN BJT transistor for switching applications. With VCEsat of 0.7V and hFE of 160, it operates at max 150°C with IC of 0.5A. Its small outline package makes it suitable for surface mount designs.
BC817-40W,115
NXP Semiconductors' BC817-40W,115 is a NPN BJT transistor for switching applications. With VCEsat of 0.7V and hFE of 250, it can handle IC up to 0.5A. Operating at 150°C max temp, it has a transition frequency of 100MHz making it suitable for high-speed switching circuits.
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 150 Cel;
BC817-25LT3G
BC817-25LT3G by Onsemi is a NPN BJT transistor with 160 min hFE, 45V VCEO, and 100MHz fT. Ideal for small signal applications in electronics due to its 0.5A IC and 0.3W Ptot capabilities. Its GULL WING terminals and SOT package make it suitable for surface mount PCB designs.
BC817-40-7-F
BC817-40-7-F by Diodes Inc. is a NPN BJT transistor with 170 min hFE, 0.5A IC, and 45V VCE. Ideal for switching applications, it has a max power dissipation of 0.31W and operates up to 150°C. Its small outline package with gull wing terminals makes it suitable for surface mount designs.
BC817-40,235
NXP Semiconductors' BC817-40,235 is a NPN BJT transistor for switching applications. With VCEsat of 0.7V and hFE of 250, it can handle IC up to 0.5A. Operating at 150°C max temp, it's ideal for small outline packages in surface mount configurations.
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; No. of Terminals: 3;
BC817-40WT1G
BC817-40WT1G by Onsemi is a NPN BJT transistor with hFE of 40, Vce of 45V, and fT of 100MHz. Ideal for small signal applications in electronics due to its high transition frequency and low collector current rating. Its Gull Wing terminals and small outline package make it suitable for surface mount PCB designs.
BC817-25L
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .5 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved