Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NSBC144WDP6T5G by Onsemi is a NPN BJT transistor with 2 elements and built-in resistor. It has a max power dissipation of 0.408W, hFE of 80, and max collector-emitter voltage of 50V. Ideal for switching applications, this small outline package with matte tin finish operates up to 150 °C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
AZTECH Wire
$20.150
SupplyDigital Components
TANS Electronics
Problanco Electronics
Kulean Microsystems
Corphita
UHIMA Technologies
Corohmni
The use of plastic/epoxy material makes the transistor lightweight and durable, ideal for portable electronic devices.
NPN transistors are commonly used for amplification and switching applications, providing versatility in circuit design.
The built-in resistor simplifies circuit design, saving space and reducing the need for external components.
Designed specifically for switching applications, ensuring reliable performance in electronic circuits that require rapid switching.
Surface mount capability allows for easy integration onto printed circuit boards, saving assembly time and providing a compact footprint.
Rectangular shape helps in efficient placement on PCBs, maximizing space utilization in electronic devices.
Flat terminals provide secure connections and ease of soldering during assembly.
The high maximum power dissipation allows the transistor to handle heavy loads without overheating, ensuring reliable operation.
The minimum DC current gain of 80 ensures consistent and stable amplification in various circuit applications.
With a high maximum operating temperature of 150 °C, this transistor is suitable for use in a wide range of environments and applications.
The high maximum collector-emitter voltage rating of 50V ensures the transistor can withstand higher voltages in the circuit.
Silicon material provides excellent performance and reliability, making this transistor a durable and long-lasting choice.
The maximum collector current of 0.1A allows the transistor to handle moderate current levels in switching applications.
Matte tin finish provides a corrosion-resistant surface for reliable solder connections and long-term performance.
Dual terminal position allows for versatile mounting options and flexible connection possibilities in circuit designs.
The short maximum time at peak reflow temperature of 30 seconds helps prevent damage to the transistor during soldering processes.
The high peak reflow temperature of 260 °C ensures reliable solder joints and secure connections during assembly.
Small Signal Bipolar Junction Transistors (BJT) NSBC144WDP6T5G attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Onsemi
Additional Features:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
NSBC144WDP6T5G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Wire Bond 01/Dec/2010
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
SPC TECHNOLOGY/ MULTICOMP
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
Weitronic Enterprise
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Taitron Components
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
1N4148WT-7
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803LW
Vishay Intertechnology
Vishay Intertechnology's ULN2803LW is an NPN BJT transistor with 8 elements and 18 terminals. It has a max VCEsat of 1.6V, IC of 0.5A, and operates b/w -20 to 85°C. Ideal for switching applications, it comes in a small outline package with gull wing terminals for surface mounting.
SBC846BDW1T1G
SBC846BDW1T1G by Onsemi is a NPN BJT with 2 elements, ideal for amplifier applications. It has a max collector-emitter voltage of 65V, min DC current gain of 200 (hFE), and operates up to 150°C. This small outline transistor features a max power dissipation of 0.38W in a rectangular package with Gull Wing terminals.
JANTX2N2222AUA
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .8 A; Terminal Form: NO LEAD; Transistor Element Material: SILICON;
MMBT2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .35 W; JESD-30 Code: R-PDSO-G3;
2N3904TA
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; Minimum DC Current Gain (hFE): 30;
MMBT3906LT1HTSA1
Infineon Technologies
Infineon's MMBT3906LT1HTSA1 is a PNP BJT transistor with 30 min hFE, ideal for switching applications. With a max VCE of 40V and IC of 0.2A, it operates up to 150°C. This surface-mount device has a rectangular package style and Gull Wing terminals, meeting AEC-Q101 standards for automotive use.
2N2222AUBC
Microchip Technology
2N2222AUBC by Microchip is a NPN transistor with max collector-emitter voltage of 50V and max current of 0.8A. It has a min DC current gain of 30, ideal for switching applications. With a small outline package style and ceramic-metal sealed body, it's suitable for surface mount designs.
JANTX2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; No. of Terminals: 3; Maximum Turn On Time (ton): 35 ns;
MMBT3906
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): .2 A;
BC856B,215
BC856B,215 by NXP Semiconductors is a PNP BJT transistor for switching applications. It has a max VCEsat of 0.65V and min hFE of 220. With a max operating temperature of 150°C, it is ideal for small outline surface mount designs.
Crystalonics
BC847BPN,115
BC847BPN,115 by NXP Semiconductors is a Small Signal BJT with NPN and PNP types. It has 2 elements, 6 terminals, hFE of 200, and max power dissipation of 0.4W. Ideal for switching applications with max operating temp of 150°C and VCE of 45V.
BC857B,215
BC857B,215 by NXP Semiconductors is a PNP BJT transistor for switching applications. It has a max VCEsat of 0.65V and min hFE of 220. With a max collector-emitter voltage of 45V, it operates at temperatures up to 150°C.
BC847B
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .45 W; Maximum Collector Current (IC): .1 A;
Semiconductor Technology
2N2907A
International Devices
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .4 W; Maximum Collector Current (IC): .6 A;
Lite-on Semiconductor
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
BC547B
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A;
MMBT2222ALT1
Shandong Yiguang Electronic Joint Stock
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
Silicon Transistor
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NSBC123EPDXV6T1G
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A; Qualification: Not Qualified;
NSBC114EDXV6T1G
NSBC114EDXV6T1G by Onsemi is a NPN BJT transistor with 2 elements and built-in resistor, ideal for switching applications. It has a max collector-emitter voltage of 50V, max collector current of 0.1A, and min DC current gain of 35. This small outline package with matte tin finish operates up to 150°C, making it suitable for various electronic devices.
NSBC114EPDXV6T1G
NSBC114EPDXV6T1G by Onsemi is a Small Signal BJT with NPN and PNP polarity, ideal for switching applications. It features 2 elements with built-in resistors in a rectangular package, supporting a max collector-emitter voltage of 50V and operating temperature up to 150°C. With a min hFE of 35, this transistor has a power dissipation of 0.5W and can handle a max collector current of 0.1A.
NSBC114EPDXV6T5
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A; JESD-30 Code: R-PDSO-F6;
NSBC114EPDXV6T1
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A; JESD-609 Code: e3;
NSBC113EPDXV6T5G
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A; Additional Features: BUILT IN BIAS RESISTOR RATIO IS 1;
NSBC113EDXV6T1G
NSBC113EDXV6T1G by Onsemi is a NPN BJT with 2 elements and built-in resistor. It has a max collector-emitter voltage of 50V, 0.1A max collector current, and 0.5W power dissipation. Ideal for switching applications, this transistor is surface mountable in a small outline package shape.
NSBC114EPDXV6T5G
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 35;
NSBC113EF3T5G
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .297 W; Maximum Collector Current (IC): .1 A; Package Body Material: PLASTIC/EPOXY;
NSBC114EDXV6T1
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A; JESD-30 Code: R-PDSO-F6;
NSBC113EPDXV6T1
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 3;
NSBC114EDXV6T5
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A; Package Shape: RECTANGULAR;
NSBC114EPDP6T5G
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .408 W; Maximum Collector Current (IC): .1 A; Terminal Finish: MATTE TIN;
NSBC113EPDXV6T5
NSBC113EDXV6T5G
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A; Package Style (Meter): SMALL OUTLINE;
NSBC114EDXV6T5G
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A; Maximum Collector-Emitter Voltage: 50 V;
NSBC114EDP6T5G
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .408 W; Maximum Collector Current (IC): .1 A; Package Body Material: PLASTIC/EPOXY;
NSBC113EDXV6T1
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 3;
NSBC113EDXV6T5
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A; Package Body Material: PLASTIC/EPOXY;
NSBC113EPDXV6T1G
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A; Moisture Sensitivity Level (MSL): 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved