Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NJVMJD32CT4G by Onsemi is a PNP BJT with 100V VCEO, 3A IC, and 15W Ptot. Ideal for automotive applications due to AEC-Q101 compliance and -65 to 150°C operating range. Suitable for surface mount designs with Gull Wing terminals in a small outline package.
Median Price
$0.327
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.639
100+ parts
$0.607
1k+ parts
10k+ parts
-
Chip1Stop
$2.260
Avnet
Future Electronics
$0.192
Arrow
$0.195
Verical
DigiKey
$0.236
Element14
$0.592
$0.412
Newark
$0.474
$0.410
Farnell
$0.227
Nova Conductors
$0.451
Digiode
IBS Electronics
$0.303
NAC Semi
$0.430
Chip Stock
Vyrian
Flip Electronics
Cyclops Electronics Ltd
ComSIT Distribution GmbH
Semicontronic
$0.160
$0.156
$0.155
Ampacity Inc.
Corohmni
$0.188
Argo Parts USA
$0.263
$0.255
Corphita
$0.575
Advanced Electronics
Continental Prestige Electronics
$0.656
$0.390
$0.247
$0.232
Aztec Data Supply Inc.
$1.270
Infinite Electronics LLP (Excess)
RC Electronics
$0.630
$0.580
$0.560
Lixinc
GreenTree Electronics
Perfect Parts
Kulean Microsystems
TANS Electronics
Problanco Electronics
iodParts Technologies Inc.
Eastek
Component Connect
SupplyDigital Components
Kepictronics
Futuretech Components
UHIMA Technologies
Authorized Procurement Solutions
Provides durability and protection for the transistor, making it suitable for various applications.
PNP transistors are commonly used in high power applications and offer efficient switching capabilities.
Simplifies circuit design and makes it easier to integrate into electronic systems.
Can handle high power dissipation, making it suitable for applications that require power amplification.
Ensures consistent and stable amplification of current in the circuit.
Can withstand high voltage levels, making it versatile for various voltage requirements in circuits.
Capable of handling high collector currents, suitable for power applications.
Provides high-speed switching capabilities, making it ideal for applications requiring fast response times.
Power Bipolar Junction Transistors (BJT) NJVMJD32CT4G attributes and parameters. Explore more Power Bipolar Junction Transistors (BJT) devices from Onsemi
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Reference Standard:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Element Material:
Nominal Transition Frequency (fT):
NJVMJD32CT4G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Dev ASSY 07/Sep/2023
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Continental Device India
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
Gulf Semiconductor
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
261
Deltrol Controls
Other Relays;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
Meritek Electronics
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
TIP110
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Minimum DC Current Gain (hFE): 500;
TIP111
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Case Connection: COLLECTOR;
TIP117
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Nominal Transition Frequency (fT): 25 MHz; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A;
BD13910STU
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): 13 W; Maximum Collector Current (IC): 1.5 A;
BD1396STU
BCP56-16
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): 2 W; Maximum Collector Current (IC): 1 A;
TIP3055G
TIP3055G by Onsemi is a NPN BJT transistor with 90W power dissipation, 60V max collector-emitter voltage, and 15A max collector current. Ideal for switching applications, it has a single configuration in a rectangular package with through-hole terminals. Operating up to 150°C, it offers a min hFE of 5 and fT of 2.5MHz.
TIP42C
Comset Semiconductors
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A;
TIP31CG
TIP31CG by Onsemi is a NPN power BJT with 30W max power dissipation, 100V max collector-emitter voltage, and 3A max collector current. Ideal for switching applications, it has a min hFE of 10 and operates up to 150°C. Its through-hole terminal form makes it suitable for various electronic designs.
BUT30V
STMicroelectronics' BUT30V is an NPN BJT transistor with a max VCE of 125V and IC of 100A. Ideal for switching applications, it has a low VCEsat of 0.9V and fast fall time of 200ns. With a power dissipation of 250W, it operates up to 150°C making it suitable for high-power electronic systems.
Forward International Electronics
TIP125
Rectron
PNP; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 5 A; Terminal Finish: MATTE TIN; Maximum Collector-Emitter Voltage: 60 V;
MJD340T4
Motorola
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .5 A; Minimum DC Current Gain (hFE): 30; Terminal Form: GULL WING;
TIP32C
Semiconductors
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 3 A;
MJE340
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): .5 A; Package Shape: RECTANGULAR;
TIP127G
TIP127G by Onsemi is a PNP Power BJT with 100V VCEO, 5A IC, and 65W Ptot. It features a Darlington configuration for amplifier applications. The transistor has a min hFE of 1000 and operates up to 150°C, making it suitable for high-power amplification needs.
TIP29C
NPN; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Collector Current (IC): 1 A; Package Body Material: PLASTIC/EPOXY;
ULN2803AP
Toshiba
Toshiba's ULN2803AP is an 8-bank NPN Darlington transistor array with built-in diode and resistor, ideal for switching applications. Features include VCEsat of 1.6V, hFE min of 1000, and IC max of 0.5A. With a max operating temp of 85°C and VCE max of 50V, it offers reliable performance in various electronic circuits.
BD140
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 75 MHz; Maximum Power Dissipation (Abs): 8 W; Maximum Collector Current (IC): 1.5 A;
MJD44H11T4
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 50 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 8 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NJVMJD31CT4G
NJVMJD31CT4G by Onsemi is a NPN BJT with 100V VCEO, 3A IC, and 15W Ptot. Ideal for automotive applications due to AEC-Q101 compliance and -65 to 150°C operating range. Suitable for surface mount designs with GULL WING terminals in a small outline package.
NJVMJD31CT4G-VF01
NJVMJD31CT4G-VF01 by Onsemi is a NPN BJT transistor with hFE of 10, VCEO of 100V, and IC of 3A. Ideal for amplifier applications, it operates b/w -65 to 150°C and has a transition frequency of 3MHz. Suitable for surface mount designs in automotive electronics per AEC-Q101 standard.
NJVMJD127T4G
NJVMJD127T4G by Onsemi is a PNP BJT with Darlington configuration, built-in diode, and resistor. It has 100V VCEO, 8A IC, and 20W power dissipation. Ideal for amplifier applications due to its high hFE of 100 and operating temperature range from -65 to 150°C.
NJVMJD44H11T4G
NJVMJD44H11T4G by Onsemi is a NPN BJT transistor with 80V VCEO, 8A IC, and 20W Ptot. Ideal for switching applications, it has a hFE of 40 and operates b/w -55 to 150°C. This small outline package with Gull Wing terminals is AEC-Q101 compliant.
NJVMJD122T4G
NJVMJD122T4G by Onsemi is a NPN Darlington BJT with built-in diode and resistor, ideal for amplifier applications. It has a max collector-emitter voltage of 100V, max collector current of 8A, and min DC current gain of 100. With a package style of small outline and surface mount capability, it operates b/w -65 to 150°C.
NJVMJD44H11G
NJVMJD44H11G by Onsemi is a NPN BJT transistor with 80V VCEO, 8A IC, and 20W Ptot. Ideal for switching applications, it has a hFE of min. 40 and operates up to 150°C. Suitable for surface mount designs in automotive electronics (AEC-Q101 compliant).
NJVMJD122T4G-VF01
NJVMJD122T4G-VF01 by Onsemi is a NPN BJT with Darlington configuration, hFE of 100, and VCE of 100V. Ideal for amplifier applications, it operates b/w -65 to 150°C with IC up to 8A. Suitable for surface mount with Gull Wing terminals in a small outline package.
NJVMJD340T4G
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 10 MHz; Maximum Power Dissipation (Abs): 15 W; Maximum Collector Current (IC): .5 A;
NJVMJD112T4G
NJVMJD112T4G by Onsemi is a NPN Darlington BJT with 100V VCEO, 2A IC, and 20W Ptot. Ideal for automotive applications due to AEC-Q101 compliance and high transition frequency of 25MHz. Suitable for power management in compact designs with small outline package style.
NJVMJD117T4G
NJVMJD117T4G by Onsemi is a PNP BJT with Darlington configuration. Features 100V VCEO, 2A IC, and 20W power dissipation. Ideal for automotive applications due to AEC-Q101 compliance and high transition frequency of 25MHz.
NJVMJD44H11T4G-VF01
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 85 MHz; Maximum Collector Current (IC): 8 A; Minimum Operating Temperature: -65 Cel;
NJVMJD32CT4G-VF01
NJVMJD32CT4G-VF01 by Onsemi is a PNP power bipolar junction transistor (BJT) with a max collector-emitter voltage of 100V and a max collector current of 3A. It is commonly used as an amplifier in various applications due to its small outline package style, high transition frequency of 3MHz, and wide operating temperature range from -65°C to 150°C.
NJVMJD340T4G-VF01
NJVMJD340T4G-VF01 by Onsemi is a NPN BJT transistor for switching applications. It has hFE of 30, VCEO of 300V, and IC of 0.5A. Ideal for small outline packages in automotive electronics due to AEC-Q101 compliance and high operating temperature range from -65 to 150°C.
NJVMJD45H11T4G
NJVMJD45H11T4G by Onsemi is a PNP BJT transistor with 80V VCEO, 8A IC, and 20W Ptot. Ideal for switching applications, it operates b/w -55 to 150°C. Its small outline package and high transition frequency of 90MHz make it suitable for various electronic designs.
NJVMJD31CG
NJVMJD31CG by Onsemi is a Power BJT with SILICON element. It comes in a RECTANGULAR PLASTIC package with GULL WING terminals for SMT. AEC-Q101 certified, it's ideal for automotive applications due to its high-temperature tolerance up to 260°C and small outline design.
NJVMJD45H11G
NJVMJD45H11G by Onsemi is a PNP BJT transistor for switching applications. With hFE of 40, it supports max VCE of 80V and IC of 8A. Its small outline package with Gull Wing terminals makes it suitable for surface mount designs in automotive electronics.
NJVMJD44H11RLG
NJVMJD44H11RLG by Onsemi is a NPN BJT transistor with 80V VCEO, 8A IC, and 20W Ptot. Ideal for switching applications, it operates up to 150°C and has an hFE of at least 40. Suitable for surface mount designs in automotive electronics due to AEC-Q101 compliance.
NJVMJD50T4G
NJVMJD50T4G by Onsemi is a NPN BJT transistor with max. Vce of 400V, Ic of 1A, and hFE of 10. Ideal for switching applications, it operates b/w -65 to 150°C. Its small outline package with gull wing terminals makes it suitable for surface mount designs.
NJVMJD47T4G
NJVMJD47T4G by Onsemi is a NPN BJT transistor for switching applications. It has a max collector-emitter voltage of 250V, max operating temp of 150°C, and max power dissipation of 15W. With a small outline package style, it's ideal for high-power switching circuits in automotive electronics.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved