Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NJVMJD112T4G by Onsemi is a NPN Darlington BJT with 100V VCEO, 2A IC, and 20W Ptot. Ideal for automotive applications due to AEC-Q101 compliance and high transition frequency of 25MHz. Suitable for power management in compact designs with small outline package style.
Median Price
$0.818
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.280
100+ parts
$0.491
1k+ parts
$0.353
10k+ parts
$0.289
Adafruit Industries
$1.295
$1.230
-
DigiKey
Flip Electronics (Authorized)
Rochester
$0.355
$0.294
$0.263
Digiode
$0.636
Nova Conductors
$1.000
Chip Stock
NAC Semi
$0.743
Vyrian
Flip Electronics
DigiKey Marketplace
$0.290
Corohmni
Argo Parts USA
$0.354
$0.344
Continental Prestige Electronics
$0.347
Aztec Data Supply Inc.
$0.461
Corphita
$0.603
Ampacity Inc.
$0.610
Semicontronic
$0.595
$0.592
Component Stockers USA
$0.770
$0.460
$0.330
Advanced Electronics
Perfect Parts
RC Electronics
$0.150
$0.140
TANS Electronics
Kulean Microsystems
iodParts Technologies Inc.
Netroflash
$0.980
$0.950
$0.930
SupplyDigital Components
Problanco Electronics
Authorized Procurement Solutions
UHIMA Technologies
Provides good thermal and electrical insulation, making the transistor reliable and safe to use.
Commonly used for amplifying and switching electronic signals, versatile for various applications.
Offers high current gain and minimal base current drive, suitable for applications requiring high current amplification.
Enables easy and efficient PCB assembly, saving time and effort during manufacturing.
Allows the transistor to handle high power loads without overheating or failing, ensuring reliable performance.
Suitable for applications requiring higher voltage handling capability, providing flexibility in design.
Provides high current gain, ensuring efficient signal amplification and reliable operation.
Can operate in high-temperature environments without performance degradation, suitable for industrial applications.
Offers high frequency response, allowing for fast switching speeds and optimal performance in high-speed circuits.
Power Bipolar Junction Transistors (BJT) NJVMJD112T4G attributes and parameters. Explore more Power Bipolar Junction Transistors (BJT) devices from Onsemi
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Reference Standard:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Element Material:
Nominal Transition Frequency (fT):
NJVMJD112T4G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Dev ASSY 07/Sep/2023
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Sensitron Semiconductor
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
Philips Components
TIP125
Semitronics
PNP; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 5 A; Minimum DC Current Gain (hFE): 1000;
TIP41C
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Collector Current (IC): 6 A; Package Style (Meter): FLANGE MOUNT;
TIP110
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Minimum DC Current Gain (hFE): 500;
TIP120
Texas Instruments
TIP120 by Texas Instruments is a NPN Darlington transistor with max VCEsat of 4V and hFE of 1000. Ideal for switching applications, it has a max IC of 5A and can handle up to 65W power dissipation. With a max operating temp of 150°C, it's commonly used in power control circuits.
BD243C
Rectron
NPN; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A;
JANTX2N3055
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 15 A; Terminal Position: BOTTOM; Terminal Form: PIN/PEG;
BDW93C
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 80 W; Maximum Collector Current (IC): 12 A; JEDEC-95 Code: TO-220AB;
ULN2064B
STMicroelectronics ULN2064B is a 4-bank NPN BJT with built-in diode and resistor, ideal for switching applications. Features include VCEsat of 1.4V, max IC of 1.75A, and VCE of 35V. Packaged in PLASTIC/EPOXY material with 16 terminals in RECTANGULAR shape for THROUGH-HOLE mounting.
TIP142T
Samsung
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 80 W; Maximum Collector Current (IC): 10 A; Transistor Element Material: SILICON;
2N3055
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 2 MHz; Maximum Power Dissipation (Abs): 115 W; Maximum Collector Current (IC): 15 A;
ULN2804A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Transistor Application: SWITCHING; Additional Features: LOGIC LEVEL COMPATIBLE;
BD13910STU
BD13910STU by Onsemi is a NPN BJT transistor with 80V VCEO and 1.5A IC, ideal for switching applications. With a hFE of 63 and 13W Ptot, it operates up to 150°C making it suitable for high-power tasks in various electronic circuits. The package style is flange mount with through-hole terminals, offering ease of installation.
TIP122
Diotec Semiconductor Ag
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): 5 A; Moisture Sensitivity Level (MSL): 1; JESD-30 Code: R-PSFM-T3;
TIP117
PNP; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 2 A; Package Style (Meter): FLANGE MOUNT; JESD-609 Code: e3;
JAN2N3055
Solitron Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 2.5 MHz; Maximum Power Dissipation (Abs): 115 W; Maximum Collector Current (IC): 15 A;
BD1396STU
BD1396STU by Onsemi is a NPN BJT transistor with 80V VCEO, 1.5A IC, and 13W Ptot. Ideal for switching applications, it has a min hFE of 40 and operates up to 150°C. The package style is flange mount with through-hole terminals in a rectangular shape.
TIP122FP
TIP122FP by STMicroelectronics is a NPN power BJT with 100V VCEO, 5A IC, and 2W Ptot. Ideal for switching applications, it features a Darlington configuration with built-in diode and resistor. The transistor operates up to 150°C and comes in a rectangular package with through-hole terminals.
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A;
BD14016S
The Onsemi BD14016S is a PNP BJT transistor with 80V VCEO, 1.5A IC, and 12.5W power dissipation. Ideal for switching applications, it has a min hFE of 100 and operates up to 150°C. The through-hole package with matte tin finish is suitable for various electronic designs.
TIP112
Transys Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Maximum Power Dissipation Ambient: 2 W;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NJVMJD31CT4G
NJVMJD31CT4G by Onsemi is a NPN BJT with 100V VCEO, 3A IC, and 15W Ptot. Ideal for automotive applications due to AEC-Q101 compliance and -65 to 150°C operating range. Suitable for surface mount designs with GULL WING terminals in a small outline package.
NJVMJD31CT4G-VF01
NJVMJD31CT4G-VF01 by Onsemi is a NPN BJT transistor with hFE of 10, VCEO of 100V, and IC of 3A. Ideal for amplifier applications, it operates b/w -65 to 150°C and has a transition frequency of 3MHz. Suitable for surface mount designs in automotive electronics per AEC-Q101 standard.
NJVMJD127T4G
NJVMJD127T4G by Onsemi is a PNP BJT with Darlington configuration, built-in diode, and resistor. It has 100V VCEO, 8A IC, and 20W power dissipation. Ideal for amplifier applications due to its high hFE of 100 and operating temperature range from -65 to 150°C.
NJVMJD44H11T4G
NJVMJD44H11T4G by Onsemi is a NPN BJT transistor with 80V VCEO, 8A IC, and 20W Ptot. Ideal for switching applications, it has a hFE of 40 and operates b/w -55 to 150°C. This small outline package with Gull Wing terminals is AEC-Q101 compliant.
NJVMJD122T4G
NJVMJD122T4G by Onsemi is a NPN Darlington BJT with built-in diode and resistor, ideal for amplifier applications. It has a max collector-emitter voltage of 100V, max collector current of 8A, and min DC current gain of 100. With a package style of small outline and surface mount capability, it operates b/w -65 to 150°C.
NJVMJD44H11G
NJVMJD44H11G by Onsemi is a NPN BJT transistor with 80V VCEO, 8A IC, and 20W Ptot. Ideal for switching applications, it has a hFE of min. 40 and operates up to 150°C. Suitable for surface mount designs in automotive electronics (AEC-Q101 compliant).
NJVMJD122T4G-VF01
NJVMJD122T4G-VF01 by Onsemi is a NPN BJT with Darlington configuration, hFE of 100, and VCE of 100V. Ideal for amplifier applications, it operates b/w -65 to 150°C with IC up to 8A. Suitable for surface mount with Gull Wing terminals in a small outline package.
NJVMJD340T4G
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 10 MHz; Maximum Power Dissipation (Abs): 15 W; Maximum Collector Current (IC): .5 A;
NJVMJD117T4G
NJVMJD117T4G by Onsemi is a PNP BJT with Darlington configuration. Features 100V VCEO, 2A IC, and 20W power dissipation. Ideal for automotive applications due to AEC-Q101 compliance and high transition frequency of 25MHz.
NJVMJD44H11T4G-VF01
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 85 MHz; Maximum Collector Current (IC): 8 A; Minimum Operating Temperature: -65 Cel;
NJVMJD32CT4G-VF01
NJVMJD32CT4G-VF01 by Onsemi is a PNP power bipolar junction transistor (BJT) with a max collector-emitter voltage of 100V and a max collector current of 3A. It is commonly used as an amplifier in various applications due to its small outline package style, high transition frequency of 3MHz, and wide operating temperature range from -65°C to 150°C.
NJVMJD32CT4G
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 15 W; Maximum Collector Current (IC): 3 A;
NJVMJD340T4G-VF01
NJVMJD340T4G-VF01 by Onsemi is a NPN BJT transistor for switching applications. It has hFE of 30, VCEO of 300V, and IC of 0.5A. Ideal for small outline packages in automotive electronics due to AEC-Q101 compliance and high operating temperature range from -65 to 150°C.
NJVMJD45H11T4G
NJVMJD45H11T4G by Onsemi is a PNP BJT transistor with 80V VCEO, 8A IC, and 20W Ptot. Ideal for switching applications, it operates b/w -55 to 150°C. Its small outline package and high transition frequency of 90MHz make it suitable for various electronic designs.
NJVMJD31CG
NJVMJD31CG by Onsemi is a Power BJT with SILICON element. It comes in a RECTANGULAR PLASTIC package with GULL WING terminals for SMT. AEC-Q101 certified, it's ideal for automotive applications due to its high-temperature tolerance up to 260°C and small outline design.
NJVMJD45H11G
NJVMJD45H11G by Onsemi is a PNP BJT transistor for switching applications. With hFE of 40, it supports max VCE of 80V and IC of 8A. Its small outline package with Gull Wing terminals makes it suitable for surface mount designs in automotive electronics.
NJVMJD44H11RLG
NJVMJD44H11RLG by Onsemi is a NPN BJT transistor with 80V VCEO, 8A IC, and 20W Ptot. Ideal for switching applications, it operates up to 150°C and has an hFE of at least 40. Suitable for surface mount designs in automotive electronics due to AEC-Q101 compliance.
NJVMJD50T4G
NJVMJD50T4G by Onsemi is a NPN BJT transistor with max. Vce of 400V, Ic of 1A, and hFE of 10. Ideal for switching applications, it operates b/w -65 to 150°C. Its small outline package with gull wing terminals makes it suitable for surface mount designs.
NJVMJD47T4G
NJVMJD47T4G by Onsemi is a NPN BJT transistor for switching applications. It has a max collector-emitter voltage of 250V, max operating temp of 150°C, and max power dissipation of 15W. With a small outline package style, it's ideal for high-power switching circuits in automotive electronics.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved