Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi 11KAI-04070-PBA-JD-BA is an image sensor with 2048x2048 pixels, 7.4um pixel size, and 70.5dB dynamic range. It operates b/w -50 to 70 °C and has a max supply voltage of 15.5V. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
SupplyDigital Components
Problanco Electronics
TANS Electronics
Kulean Microsystems
Corphita
UHIMA Technologies
Corohmni
Northwest PG Solutions
$4.047
Native Components
$4.006
With a small pixel size, this image sensor is capable of capturing sharp and detailed images even in low light conditions.
The high maximum supply voltage ensures stable and reliable performance of the image sensor.
The compact body width of 29 inch makes this image sensor suitable for a wide range of applications where space is limited.
Being a CCD type image senor, it offers high-quality image capture with low noise and high sensitivity.
The low minimum supply voltage requirement ensures energy-efficient operation of the image sensor.
With a high maximum operating temperature, this image sensor can withstand harsh environmental conditions.
The high dynamic range of 70.5 dB allows the image sensor to capture a wide range of light intensities with excellent detail.
The 4/3 optical format provides a standard aspect ratio for image capture, making it compatible with a wide range of imaging systems.
With a frame rate of 28 fps, this image sensor is capable of capturing fast-moving objects with smooth and clear images.
The through hole mount feature makes it easy to securely attach and install the image sensor in various devices or systems.
Image Sensors 11KAI-04070-PBA-JD-BA attributes and parameters. Explore more Image Sensors devices from Onsemi
Additional Features:
Array Type:
Body Width:
Body Height:
Body Length/Diameter:
Dynamic Range:
Frame Rate:
Horizontal Pixel:
Mounting Feature:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optical Format (inch):
Package Shape or Style:
Pixel Size (um):
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Termination Type:
Vertical Pixel:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
Taiwan Semiconductor
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
KAI-4021-CBA-CR-BA
KAI-4021-CBA-CR-BA by Onsemi is an Image Sensor with 2048x2048 pixels, 7.4um pixel size, and 60dB dynamic range. Ideal for applications requiring high-resolution imaging in a compact form factor.
AR1335CSSC32SMD20
The Onsemi AR1335CSSC32SMD20 is a 1/3.2 inch CMOS image sensor with a pixel size of 1.1um. It operates at a max supply voltage of 1.3V and has a master clock of 48 MHz. This sensor is commonly used in applications that require high-resolution imaging with a frame rate of up to 30 fps.
CYII5SC1300AB-QDC
CYII5SC1300AB-QDC by Onsemi is an image sensor with 1280x1024 pixels, 6.7x6.7um pixel size, and 40MHz master clock. It operates b/w -30 to 65 °C, outputs digital voltage from 0.50-2.20V, and has a dynamic range of 64dB. Ideal for applications requiring high-resolution imaging in industrial automation and surveillance systems.
11KAI-04070-CBA-JD-AE
The Onsemi 11KAI-04070-CBA-JD-AE is an image sensor with 2048x2048 pixels, 7.4um pixel size, and 70.5dB dynamic range. It operates b/w -50 to 70 °C, with a max supply voltage of 15.5V. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
NOIP3FN1300A-QDI
NOIP3FN1300A-QDI by Onsemi is an Image Sensor with 4.80X4.80 um pixel size, 1.9V max supply voltage, and 72 MHz master clock. Ideal for applications requiring high-speed digital imaging with a resolution of 1280x1024 pixels at a frame rate of 210 fps.
KAI-02150-QBA-FD-BA
Onsemi's KAI-02150-QBA-FD-BA is a 2/3 inch CCD image sensor with 1920x1080 pixels, 5.5um pixel size, and 64dB dynamic range. It operates b/w -50 to 70 °C, suitable for surface mount applications in various imaging systems.
NOIP1SP0480A-STI
NOIP1SP0480A-STI by Onsemi is an image sensor with 4.80x4.80 um pixel size, 68 MHz master clock, and 808 (H) x 608 (V) resolution. It operates b/w -40 to 85 °C and has a dynamic range of 59 dB. Ideal for applications requiring high-speed imaging in compact devices.
KAF-16801-AAA-DP-AE
The Onsemi KAF-16801-AAA-DP-AE is a square image sensor with 4096x4096 pixels, offering a pixel size of 9x9 µm and a dynamic range of 76 dB. It operates b/w -60 to 60 °C, suitable for high-resolution imaging applications requiring precise color capture and low light sensitivity. The sensor features a full-frame array design and can achieve data rates up to 10 Mbps, making it ideal for professional digital photography and scientific imaging projects.
NOIP1SN2000A-QTI
NOIP1SN2000A-QTI by Onsemi features 4.8x4.8 um pixel size, 360 MHz master clock, and 1920x1200 resolution. This image sensor is ideal for high-speed imaging applications requiring a dynamic range of 60 dB and a frame rate of 230 fps in an optical format of 2/3 inch.
KAF-3200-AAA-CB-B1
Image Sensors;
CYII5SM1300AB-QWC
CYII5SM1300AB-QWC by Onsemi is an image sensor with 1280x1024 pixels, 6.7um pixel size, and a max supply voltage of 4.5V. It is ideal for applications requiring a digital output interface, such as surveillance cameras or industrial imaging systems.
MT9V124EBKSTC-CP
MT9V124EBKSTC-CP by Onsemi is a 1.75um CMOS image sensor with 648x488 pixels, offering a dynamic range of 58dB. Operating at -30 to 70 °C, it has a digital voltage output interface and consumes up to 9.5mA current. Ideal for frame applications requiring a square package shape and surface mounting feature.
KAI-1020-FBA-FD-AE
KAI-1020-FBA-FD-AE by Onsemi is an image sensor with 7.4x7.4 um pixel size, 1000x1000 resolution, and 58 dB dynamic range. It is used in applications requiring high-quality imaging such as surveillance cameras and industrial machine vision systems.
KAI-04022-FBA-CR-BA
KAI-04022-FBA-CR-BA by Onsemi is an image sensor with 2048x2048 pixels, 7.4um pixel size, and 72dB dynamic range. Ideal for applications requiring high-resolution imaging in a compact form factor, such as industrial machine vision systems or scientific cameras.
KAI-16000-AAA-JD-B1
Kodak Image Sensor Solutions
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Additional Features: SENSITIVITY IS 30 UV/ELECTRON; Minimum Supply Voltage: 14.5 V;
AR0220AT4R00XUEA2-DPBR
Onsemi's AR0220AT4R00XUEA2-DPBR is a 1/1.8 inch CMOS image sensor with 1828x948 pixels, offering digital output via a 2-wire interface at 60 fps. Ideal for surface mount applications in frame arrays, this sensor measures 9" x 12mm x 1.7mm and features Tin/Silver/Copper terminal finish for solder connections.
NOIP1FN0500A-QTI
NOIP1FN0500A-QTI by Onsemi is an image sensor with 800x600 resolution, 4.8um pixel size, and 60dB dynamic range. It operates at a max clock of 72MHz and has a frame rate of 545fps. Ideal for applications requiring high-speed digital imaging in industrial or scientific settings.
MT9V128IA3XTC-DP
MT9V128IA3XTC-DP by Onsemi is a 5.6x5.6 um CMOS image sensor with 680H x 512V pixels, offering a dynamic range of 74.8 dB and operating at temperatures from -40 to 105 °C. Ideal for applications requiring a digital voltage output interface, such as surveillance cameras or industrial imaging systems.
AR0135CS2M00SUEA0-DRBR1
Onsemi's AR0135CS2M00SUEA0-DRBR1 is a 1/3 inch CMOS image sensor with 1280x960 pixels, offering a dynamic range of 71.1 dB and operating at temperatures from -30 to 70°C. With a max supply voltage of 1.95V and output interface type of 2-WIRE INTERFACE, it is ideal for applications requiring high-resolution imaging at up to 54 fps.
MT9V024IA7XTM-DR1
MT9V024IA7XTM-DR1 by Onsemi is a 1/3-inch CMOS image sensor with 6x6 um pixel size, offering 60 fps frame rate. Ideal for applications requiring high-quality imaging such as surveillance cameras and industrial machine vision systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Body Height: 3 mm; Maximum Supply Voltage: 15.5 V; Termination Type: SOLDER;
11KAI-04070-CBA-JD-BA
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 11 mA; Maximum Supply Voltage: 15.5 V; Body Height: 3 mm;
11KAI-04070-FBA-JD-AE
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -50 Cel; Maximum Operating Temperature: 70 Cel; Vertical Pixel: 2048;
11KAI-04070-FBA-JD-BA
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Maximum Operating Current: 11 mA; Minimum Operating Temperature: -50 Cel;
11KAI-04070-PBA-JD-AE
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Body Width: 29 inch; Horizontal Pixel: 2048; Maximum Operating Temperature: 70 Cel;
11KAI-04070-QBA-JD-AE
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Pixel Size (um): 7.4X7.4; Maximum Operating Current: 11 mA; Body Length/Diameter: 40 mm;
11KAI-04070-QBA-JD-BA
IMAGE SENSOR,CCD; Mounting Feature: THROUGH HOLE MOUNT; Package Shape or Style: RECTANGULAR; Frame Rate: 28 fps; Dynamic Range: 70.5 dB; Maximum Operating Temperature: 70 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved