Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Texas Instruments CC1021RSS is a cellphone IC with 32 terminals in a square package. It operates b/w -40 to 85°C, with a supply voltage of 3V. This RF and baseband circuit has a terminal pitch of 0.65mm, making it suitable for industrial telecom applications.
Median Price
$4.850
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
$4.510
100+ parts
$4.420
1k+ parts
$4.330
10k+ parts
-
DigiKey
$5.190
Digiode
$4.740
Vyrian
$4.990
Sunrise Surplus Inc.
DigiKey Marketplace
Native Components
$0.822
Northwest PG Solutions
$0.904
Corphita
$4.491
Parana Technologies
$11.613
$12.009
ChromeModa Solutions
$13.048
$10.699
IDEA Electronic Components Group
$12.396
$11.743
DigiPath Technology Company
$11.764
Allows for easy and efficient installation onto circuit boards, saving time and effort during manufacturing.
Operates at a standard voltage level, making it compatible with common power sources.
Square shape provides a compact design that can fit well within the overall layout of a cellphone.
Sufficient number of terminals for connecting various components within the cellphone circuitry.
Capable of operating at high temperatures without compromising performance, ensuring reliability.
Capable of operating in extreme cold conditions without any issues, making it suitable for a wide range of environments.
CMOS technology offers low power consumption and high noise immunity, enhancing the efficiency and performance of the product.
Designed specifically for telecom applications, ensuring optimal signal processing and communication performance.
Cellphone ICs CC1021RSS attributes and parameters. Explore more Cellphone ICs devices from Texas Instruments
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
CC1021RSS Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Kec
Daco Semiconductor
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
Asi Semiconductor
NRF9160-SIBA-B1A-R7
Nordic Semiconductor Asa
Nordic Semiconductor's NRF9160-SIBA-B1A-R7 is a CELL IC with RF & baseband circuit. It operates in industrial temp range (-40 to 85°C) with 3.8V supply voltage. This surface-mountable chip has 127 terminals, rectangular shape, and grid array package suitable for cellphone applications.
SKY66122-11
Skyworks Solutions
SKY66122-11 by Skyworks Solutions is a cellphone IC with 36 terminals in a square chip carrier package. Operating b/w -40°C to 85°C, it integrates RF and baseband circuits at 3.3V supply voltage. With a compact size of 6x6mm and terminal pitch of 0.5mm, it's ideal for telecom applications requiring high performance in a small form factor.
LMV228TL/NOPB
Texas Instruments
LMV228TL/NOPB by Texas Instruments is a cellphone IC with surface mount capability. It features a max operating temperature of 85°C and min of -40°C, making it suitable for industrial applications. With a max supply current of 8mA, it is designed for RF and baseband circuit use in telecommunications.
GC5016-PB
GC5016-PB by Texas Instruments is a Cellphone IC with 252 terminals in a square GRID ARRAY package. It operates b/w -40 to 85°C, with power supplies of 1.8V and 3.3V for RF and baseband circuits. The PLASTIC/EPOXY body material and TIN LEAD terminal finish make it suitable for industrial telecom applications.
LMV228SDX/NOPB
RF AND BASEBAND CIRCUIT; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1;
MAX2674EWT+T
Analog Devices
MAX2674EWT+T by Analog Devices is a Cellphone IC with BICMOS tech, 3.3V supply voltage, and RF/Baseband circuit type. It has a temp range of -40 to 85°C, package style GRID ARRAY, and terminal finish of TIN SILVER COPPER NICKEL. Ideal for telecom applications requiring high performance in a compact form factor.
TRF3710IRGZRG4
TRF3710IRGZRG4 by Texas Instruments is a cellphone IC with 48 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 5V, making it ideal for telecom applications.
CC1101RTKG3
CC1101RTKG3 by Texas Instruments is a cellphone IC with 20 terminals, operating at 1.8-3.6V. It features a square shape, nickel palladium gold finish, and industrial temperature grade suitable for RF and baseband circuits. This chip carrier has a very thin profile, measures 4x4mm in size, and can withstand peak reflow temperatures up to 260°C in surface mount applications.
SKY85747-11
SKY85747-11 by Skyworks Solutions is a cellphone IC with 24 terminals in a rectangular package. It operates b/w -40°C to 85°C, with a max supply current of 500mA at 5V. This RF and baseband circuit is ideal for telecom applications due to its compact size and heat sink design.
LLCC68IMLTRT
Semtech
Semtech's LLCC68IMLTRT is a cellphone IC with 24 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85°C, with matte tin finish and 3.3V supply voltage. Ideal for RF and baseband circuits in telecom applications due to its compact size (4x4mm) and quad terminal position.
ADC31RF80IRMP
Texas Instruments' ADC31RF80IRMP is a cellphone IC with 72 terminals in a square chip carrier package. Operating from -40 to 85°C, it features RF and baseband circuits, 1.15V supply voltage, and 1439mA max current draw. Ideal for telecom applications due to its compact size and industrial temperature grade suitability.
LARA-R202-02B
U-blox Ag
LARA-R202-02B by U-blox Ag is a Cellphone IC with TS 16949 screening. Features RF and baseband circuit for telecom, operates at -20 to 65°C, and requires 3.8V supply voltage. Ideal for compact devices due to its small size of 24x26mm and low seated height of 2.87mm.
HMC900LP5E
Analog Devices' HMC900LP5E is a cellphone IC with 32 terminals in a square chip carrier package. Operating temperature range from -40 to 85°C, suitable for industrial telecom applications. Features include matte tin finish, no-lead terminal form, and nominal voltage of 5V.
TRF370315IRGET
TRF370315IRGET by Texas Instruments is a cellphone IC with 24 terminals, operating at -40 to 85°C. It features a supply voltage of 5V, max current of 235mA, and RF/baseband circuit type. Ideal for telecom applications due to its compact square chip carrier package and surface-mount capability.
CC2591RGVTG4
CC2591RGVTG4 by Texas Instruments is a cellphone IC with 16 terminals and operates at temperatures ranging from -40 to 85°C. It features a supply voltage of 3V, max current of 4mA, and is designed for RF front end circuits in industrial-grade applications.
CC2420RTCR
The Texas Instruments CC2420RTCR is a cellphone IC with 48 terminals in a square package. It operates b/w -40 to 85°C, with a supply voltage of 1.8V and peak reflow temperature of 260°C. Ideal for RF and baseband circuits, it features CMOS technology and nickel palladium gold terminal finish.
TRF4900PWR
TRF4900PWR by Texas Instruments is a cellphone IC with 24 terminals, operating at 3V. It features a small outline package style and CMOS technology for RF and baseband circuits. Suitable for telecom applications, it has a temperature range of -20 to 60°C.
SARA-R510M8S-00B
RF AND BASEBAND CIRCUIT;
CC2400RSU
CC2400RSU by Texas Instruments is a cellphone IC with 48 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It features RF and baseband circuits, CMOS technology, and a nominal voltage of 1.8V for telecom applications.
CC1000PWG3
CC1000PWG3 by Texas Instruments is a cellphone IC with 28 terminals, operating at temperatures from -40 to 85°C. It features a supply voltage of 2.5/3.3V and telecom IC type for RF and baseband circuits. The package is small outline, thin profile, with shrink pitch, suitable for industrial applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
CC1000PW
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: TSSOP; Package Shape: RECTANGULAR;
CC1000PWR
CC1000PWRG3
CC1000PWRG3 by Texas Instruments is a cellphone IC with 28 terminals, operating at temperatures from -40 to 85°C. It features a supply voltage of 2.5/3.3V and telecom IC type for RF and baseband circuits. The package is small outline, thin profile, with gull wing terminals suitable for industrial applications.
CC1020RSSR
The Texas Instruments CC1020RSSR is a cellphone IC with 32 terminals in a square chip carrier package. Operating temperature range of -40 to 85°C, CMOS technology, and RF & baseband circuit type make it ideal for industrial telecom applications. With a nominal voltage of 3V and data rate of 0.1536 Mbps, it offers high performance in a compact form factor.
CC1000-RWP2
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 28; Package Code: VFBGA; Package Shape: RECTANGULAR;
CC1020RSST
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
CC1020-RTR1
CC1000/T&R
CC1020RUZ
CC1000_UCSP/T&R
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 28; Package Code: BGA; Package Shape: RECTANGULAR;
CC1000YZ
CC1000-RTB1
CC1000YZR
CC1000-RTR2
CC1020-RTB1
CC1020RSS
CC1000
CC1000-RTR1
CC1020RSSG4
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved