Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.50-2.20V; Maximum Operating Temperature: 65 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Benley Electronics
$1.750
AZTECH Wire
$9.420
Problanco Electronics
SupplyDigital Components
Kulean Microsystems
TANS Electronics
Authorized Procurement Solutions
Perfect Parts
UHIMA Technologies
Corohmni
Corphita
Image Sensors NOII5SM1300A-QDC attributes and parameters. Explore more Image Sensors devices from Onsemi
Array Type:
Body Width:
Body Height:
Body Length/Diameter:
Frame Rate:
Horizontal Pixel:
Housing:
Master Clock:
Mounting Feature:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optical Format (inch):
Output Interface Type:
Output Range:
Output Type:
Package Shape or Style:
Pixel Size (um):
Sensitivity (V/lx.s):
Sensors or Transducers Type:
Maximum Supply Voltage:
Minimum Supply Voltage:
Termination Type:
Vertical Pixel:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
Sangdest Microelectronics (Nanjing)
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Semitron
Microsemi
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138PS,115
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
KAI-0340-AAA-CP-AA
KAI-0340-AAA-CP-AA by Onsemi is an image sensor with 7.4x7.4 um pixel size, 640 horizontal pixels, and 480 vertical pixels. It operates b/w -50 to 70 °C with a dynamic range of 62 dB. Ideal for applications requiring high-quality imaging in industrial or scientific settings.
KAF-8300-AAB-CB-AE
The Onsemi KAF-8300-AAB-CB-AE is a CCD image sensor with 5.4x5.4 um pixel size, offering 3326 horizontal and 2504 vertical pixels. It operates b/w -10 to 70 °C with a dynamic range of 64.4 dB, outputting analog voltage at a data rate of 28 Mbps. Ideal for full-frame imaging applications due to its rectangular shape and through-hole mounting feature.
KAI-16070-QXA-JD-AE
KAI-16070-QXA-JD-AE by Onsemi is an image sensor with 7.4x7.4 um pixel size, 40 MHz master clock, and 70.5 dB dynamic range. Ideal for applications requiring high-resolution imaging in industrial cameras or surveillance systems due to its high-quality image output and efficient performance at temperatures ranging from -50 to 70 °C.
AR0135AT2M00XUEA0-TPBR
The Onsemi AR0135AT2M00XUEA0-TPBR is a 1/3-inch CMOS image sensor with 1280x960 pixels, offering a pixel size of 3.75um. It operates at a max supply voltage of 1.95V and features a digital output interface, making it suitable for applications requiring high-resolution imaging at up to 54 fps.
AR0220AT4R00XUEA1-DPBM
Onsemi's AR0220AT4R00XUEA1-DPBM is a 1/1.8 inch CMOS image sensor with 1828x948 pixels, offering digital output via a 2-wire interface at 60 fps. Ideal for surface mount applications in frame arrays, this sensor provides high-quality imaging solutions in compact devices.
TCD1304AP
Toshiba
Toshiba TCD1304AP is a CCD image sensor with 3648 horizontal pixels and 8x200 um pixel size. It operates b/w -25 to 60 °C, with output range of 1.50-3.50V. Ideal for applications requiring high sensitivity (160 V/lx.s) and a dynamic range of 50 dB in a ceramic, glass-sealed housing.
NOIL1SM4000A-GDC
NOIL1SM4000A-GDC by Onsemi is an image sensor with 2048x2048 pixels, 12x12 um pixel size, and 33 MHz master clock. It operates b/w 0-60 °C and has a dynamic range of 90 dB. Ideal for digital output applications requiring high-resolution imaging in a compact form factor.
KAF-40000-CXA-JD-AE
The Onsemi KAF-40000-CXA-JD-AE is a CCD image sensor with 6x6 um pixel size, 7304 horizontal pixels, and 5478 vertical pixels. It operates b/w 0-60 °C with a dynamic range of 70.2 dB. Ideal for high-resolution imaging applications requiring precise color reproduction and low light sensitivity.
MT9V011P11STC-B-DP
MT9V011P11STC-B-DP by Onsemi is a 640x480 CMOS image sensor with 5.60um pixel size, 27 MHz master clock, and 60dB dynamic range. Ideal for digital cameras, surveillance systems, and automotive applications due to its high resolution and low power consumption.
AR0239ATSH00XUD20-E
Onsemi's AR0239ATSH00XUD20-E is a CMOS image sensor with 3x3 um pixel size, offering 1936 (H) x 1188 (V) resolution. It operates at -40 to 105 °C with a dynamic range of 128 dB and outputs digital voltage from 0.40-2.50V. Ideal for applications requiring high-speed imaging such as surveillance cameras and automotive vision systems due to its frame rate of 90 fps and compact 1/2.7 inch optical format.
MT9V024IA7XTM-DP1
MT9V024IA7XTM-DP1 by Onsemi is a 1/3-inch CMOS image sensor with 6x6 um pixel size. It offers 60 fps frame rate, solder termination, and surface mounting feature. Ideal for applications requiring high-quality imaging in compact devices like smartphones and security cameras.
KAI-16000-AAA-JD-B2
KAI-16000-AAA-JD-B2 by Onsemi is an image sensor with 7.4x7.4 um pixel size, 65 dB dynamic range, and 4872 horizontal pixels. It is used in applications requiring high-resolution imaging such as industrial machine vision systems and scientific cameras.
KAE-08152-ABA-SD-FA
The Onsemi KAE-08152-ABA-SD-FA image sensor features 5.5x5.5 um pixel size, 40 MHz master clock, and 86 dB dynamic range. Ideal for applications requiring high-quality imaging such as surveillance cameras, industrial inspection systems, and medical imaging devices.
KAI-1020-FBA-FD-BA
KAI-1020-FBA-FD-BA by Onsemi is an image sensor with 7.4x7.4 um pixel size, 1000x1000 resolution, and 58 dB dynamic range. It is ideal for applications requiring high-quality imaging in a compact form factor, such as industrial machine vision systems or medical imaging devices.
KAF-50100-ABA-JP-AE
The Onsemi KAF-50100-ABA-JP-AE is a CCD image sensor with 6x6 um pixel size, offering a high dynamic range of 70.2 dB. With 8176 horizontal and 6132 vertical pixels, it operates b/w 0-60 °C and is ideal for full-frame imaging applications in various industries.
MT9T031C12STC
Aptina
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.30-3.30V; Body Height: 2.25 mm;
ASX340AT2C00XPED0-DPBR1
Onsemi's ASX340AT2C00XPED0-DPBR1 is a 5600x5600 pixel CMOS image sensor with 27 MHz master clock. It operates b/w -40 to 85 °C, offering a dynamic range of 87 dB. Ideal for applications requiring high-resolution imaging and fast frame rates.
KAE-08151-FBA-SD-EE
KAE-08151-FBA-SD-EE by Onsemi is an image sensor with 5.5x5.5 um pixel size, 66 dB dynamic range, and 2856 horizontal and vertical pixels. It operates b/w -40 to 40 °C with a supply voltage range of 14.7V to 15.3V. Ideal for applications requiring high-resolution imaging in industrial or scientific settings due to its superior technical specifications.
KAE-02150-FBB-JP-FA
KAE-02150-FBB-JP-FA by Onsemi is an image sensor with 5.5X5.5 um pixel size, 1920x1080 resolution, and 68 dB dynamic range. Ideal for applications requiring high-quality imaging in industrial settings or surveillance systems due to its superior performance and reliability at a max supply voltage of 6V.
KAI-02170-QBA-JD-AE
KAI-02170-QBA-JD-AE by Onsemi is an image sensor with 1920x1080 pixels, 7.4um pixel size, and 70.2dB dynamic range. It operates b/w -50 to 70 °C and has a supply voltage range of 14.5V to 15.5V. Ideal for applications requiring high-resolution imaging in various environmental conditions.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NOII4SM6600A-QDC
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Power Supplies (V): 2.5; Minimum Operating Temperature: -30 Cel;
NOII4SM014KA-GEC
IMAGE SENSOR,CMOS; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0-3.3V; Output Interface Type: SPI INTERFACE;
NOII5FM1300A-QDC
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.50-2.20V; Housing: CERAMIC;
NOII5SC1300A-QDC
NOII5SM1300A-QWC
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.50-2.20V; Optical Format (inch): 2/3;
NOII5SM1300A-WWC
IMAGE SENSOR,CMOS;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved