Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE;
Median Price
$12.190
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$10.910
10k+ parts
$10.260
Nova Conductors
$15.520
Digiode
$17.356
Vyrian
Cyclops Electronics Ltd
SPM Sales
Prism Electronics
Corohmni
$7.331
Parana Technologies
$13.726
$12.765
Aztec Data Supply Inc.
$14.502
IDEA Electronic Components Group
$14.759
$14.021
Continental Prestige Electronics
$15.210
Semicontronic
$15.530
$15.142
$15.064
Corphita
$16.443
DigiPath Technology Company
$23.024
$22.103
Microchip USA
$42.970
$42.350
$42.050
$41.740
Futuretech Components
Lixinc
Argo Parts USA
Technoshack Inc. (Excess)
Perfect Parts
Kepictronics
iodParts Technologies Inc.
$11.094
Cellphone ICs HMC830LP6GETR attributes and parameters. Explore more Cellphone ICs devices from Hittite Microwave
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
HMC830LP6GETR Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
NORWOOD, Mass. & CHELMSFORD, Mass.--(BUSINESS WIRE)-- Analog Devices, Inc. (NASDAQ:ADI), a global leader in high-performance semiconductors for signal processing applications, and Hittite Microwave Corporation (NASDAQ:HITT), an innovative designer and manufacturer of high performance integrated circuits, modules, subsystems and instrumentation for RF, microwave and millimeter wave applications, today announced that the two companies have entered into a definitive agreement whereby ADI will acquire Hittite for $78 per share in cash. The closing price of Hittite's common stock on June 6, 2014 was $60.56 per share. This agreement reflects a total enterprise value for Hittite of approximately $2 billion. ADI expects to fund the acquisition through a combination of cash on hand and short-term debt financing. The Boards of Directors of each company have approved the transaction, which is expected to close near the end of ADI's third fiscal quarter of 2014, subject to regulatory approvals and other customary closing conditions.
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
General Diode
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
Semitronics
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
1554216004
Molex
WIRE AND CABLE;
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
STM32H743BIT6
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
SPC TECHNOLOGY/ MULTICOMP
TCM320AC57IDW
Texas Instruments
TCM320AC57IDW by Texas Instruments is a Cellphone IC with 20 terminals, operating at temperatures from -40 to 85°C. It features a 13-bit linear coding and A-Law companding law, suitable for baseband circuit applications. This small outline package has a rectangular shape, gull wing terminal form, and requires a 5V supply voltage.
TCM4400APN
TCM4400APN by Texas Instruments is a cellphone IC with 80 terminals in a square package. It operates b/w -25°C to 85°C, with a nominal voltage of 3V. This baseband circuit has a low profile flatpack style suitable for telecom applications.
LMH2120UMX/NOPB
LMH2120UMX/NOPB by Texas Instruments is a Cellphone IC with 6 terminals in a very thin profile grid array package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit requires 4mA supply current at 4.5V, making it ideal for cellphone applications.
LMV227SD
LMV227SD by Texas Instruments is a cellphone IC with 6 terminals in a small outline, very thin profile package. It operates b/w -40 to 85°C and has a nominal voltage of 2.7V, making it suitable for RF and baseband circuits in industrial telecom applications.
TCM8002IFR
Texas Instruments TCM8002IFR is a cellphone IC with 44 terminals in a square flatpack package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. Features include CMOS technology, 3.3V supply voltage, and baseband circuit for telecom applications.
CC2400-RTB1
CC2400-RTB1 by Texas Instruments is a cellphone IC with 48 terminals, operating at -40 to 85°C. It features a supply voltage of 1.8V, RF and baseband circuitry, and low supply current of 0.005mA. Ideal for telecom applications due to its compact square package shape and CMOS technology.
AD6655ABCPZ-80
Analog Devices
AD6655ABCPZ-80 by Analog Devices is a cellphone IC with 64 terminals, operating at -40 to 85°C. It has a supply voltage of 1.8V and low supply current of 0.42mA. Ideal for baseband circuits, this square chip carrier package is surface mountable with a terminal pitch of 0.5mm.
TRF5901PTG4
TRF5901PTG4 by Texas Instruments is a cellphone IC with 48 terminals in a square package. It operates at -40 to 85°C, with supply voltage of 3V and current of 0.053mA. This RF and baseband circuit has a low profile flatpack style for industrial telecom applications.
MAX2620EUA+T
MAX2620EUA+T by Analog Devices is a cellphone IC with 8 terminals in a small outline package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 3V, making it ideal for telecom applications.
CC1150RGVT
The Texas Instruments CC1150RGVT is a cellphone IC with a package style of chip carrier, suitable for RF and baseband circuits. It operates at temperatures ranging from -40 to 85°C, with a supply voltage of 3V and data rate of 0.5 Mbps. This surface-mount IC has 16 terminals in a square shape, ideal for industrial applications requiring compact design and high performance.
GC5318IZED
Texas Instruments' GC5318IZED is a Cellphone IC with 388 terminals in a square GRID ARRAY package. Operating b/w -40 to 85°C, it has TIN SILVER COPPER finish and BALL terminal form. Ideal for BASEBAND CIRCUIT in telecom, it has a 1.5V supply voltage and measures 27x27mm with 2.5mm height.
ST25R3920B-AQWT
RF AND BASEBAND CIRCUIT;
TLV321AC37CDW
TLV321AC37CDW by Texas Instruments is a 20-terminal cellphone IC in small outline package. Operating temp range: 0-70°C, supply voltage: 3V. Ideal for baseband circuits due to CMOS technology and gull wing terminal form.
CC2511F8RSP
Texas Instruments CC2511F8RSP is a cellphone IC with 36 terminals in a square chip carrier package. Operating b/w 0-85°C, it features CMOS technology, RF and baseband circuitry for telecom applications. With a nominal voltage of 3.3V, it has a compact size of 6x6mm and terminal pitch of 0.5mm.
HMC485MS8GE
Analog Devices' HMC485MS8GE is a cellphone IC with 8 terminals in a small outline package. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 5V, making it ideal for telecom applications.
LMH2120UMX
LMH2120UMX by Texas Instruments is a Cellphone IC with RF and baseband circuit. It features 6 terminals in a rectangular grid array package style, suitable for telecom applications. Operating temperature ranges from -40 to 85°C, making it ideal for industrial use.
SI4721-B20-GMR
Silicon Labs
Silicon Labs' SI4721-B20-GMR is a cellphone IC with 20 terminals in a square chip carrier package. Operating b/w -20°C to 85°C, it features RF and baseband circuits for telecom applications. With a nominal voltage of 3.3V, this IC has a compact size of 3x3mm suitable for surface mount designs.
ADF7901BRU
ADF7901BRU by Analog Devices is a cellphone IC with 24 terminals in a small outline package. It operates at temperatures from 0 to 50 °C and has a supply voltage of 3V. This RF and baseband circuit is ideal for telecom applications requiring surface mount technology.
LMV225SDX/NOPB
LMV225SDX/NOPB by Texas Instruments is a cellphone IC with 6 terminals, operating temperature range of -40 to 85°C, and supply current of 8mA. It is a surface-mount RF and baseband circuit suitable for industrial telecom applications due to its small outline package style and low nominal voltage of 2.7V.
AD6655BCPZ-125
AD6655BCPZ-125 by Analog Devices is a cellphone IC with 64 terminals in a square chip carrier package. Operating temperature ranges from -40 to 85 °C, suitable for industrial use. It features a nominal voltage of 1.8V and is ideal for baseband circuit applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HMC832LP6GETR
Analog Devices' HMC832LP6GETR is a 40-terminal cellphone IC in a square chip carrier package with matte tin finish. It operates b/w -40 to 85°C, suitable for industrial use. This RF and baseband circuit has a nominal voltage of 3.3V, making it ideal for telecom applications.
HMC832LP6GE
Hittite Microwave
HMC830LP6GETR
HMC832ALP6GETR
HMC832ALP6GE
HMC830LP6GE
Analog Devices' HMC830LP6GE is a 40-terminal cellphone IC in a square chip carrier package with matte tin finish. Operating b/w -40 to 85°C, it's ideal for RF and baseband circuits, with a nominal voltage of 3.3V. Its compact size of 6x6mm and very thin profile make it suitable for telecom applications requiring high performance in limited space.
HMC818LP4E
RF AND BASEBAND CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
HMC818LP4ETR
HMC829LP6GE
HMC829LP6GETR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved