Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NTVB200SB-L by Onsemi is a single silicon surge protector with a max breakdown voltage of 320V. It has a small outline package style and operates b/w -40 °C to 150°C. Ideal for surface mount applications in protecting electronic devices from voltage surges.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Kepictronics
Kulean Microsystems
Problanco Electronics
TANS Electronics
SupplyDigital Components
Corphita
UHIMA Technologies
Corohmni
Plastic/Epoxy package body material is lightweight and durable, making the surge protector easy to handle and long-lasting.
Single configuration simplifies installation and maintenance of the surge protector.
Surface mount capability allows for easy installation on circuit boards, saving space and facilitating integration into electronic designs.
Rectangular package shape provides a compact form factor, enabling efficient use of space on PCBs.
C-bend terminal form ensures secure connections and enables easy soldering during assembly.
Having 2 terminals simplifies the connection of the surge protector in the circuit.
Small outline package style saves space on the PCB and allows for high-density circuit designs.
High maximum operating temperature ensures reliable performance in various environmental conditions.
Silicon surge protectors are known for their fast response times and excellent clamping capabilities, providing effective protection against voltage spikes.
Low minimum operating temperature allows the surge protector to function in cold environments without degradation in performance.
Tin terminal finish provides good conductivity and corrosion resistance, ensuring reliable electrical connections.
Dual terminal position offers flexibility in installation and connection options.
High maximum breakdown voltage ensures effective protection against power surges and spikes.
Short maximum time at peak reflow temperature prevents overheating and damage to the surge protector during soldering processes.
High peak reflow temperature resistance ensures the surge protector can withstand the soldering process without degradation.
Silicon Surge Protectors NTVB200SB-L attributes and parameters. Explore more Silicon Surge Protectors devices from Onsemi
Maximum Breakdown Voltage:
Configuration:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
NTVB200SB-L Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
Lite-on Semiconductor
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
General Diode
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Continental Device India
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TPA130
STMicroelectronics' TPA130 is a single silicon surge protector with 16A non-repetitive peak current and 130V repetitive peak reverse voltage. It is used for surge protection in applications requiring isolated case connection, with operating temperatures ranging from -55 °C to 150°C.
TISP4350H3LMR
TISP4350H3LMR by Texas Instruments is a single silicon surge protector with a non-repetitive peak on-state current of 60A. It operates b/w -40°C to 150°C, with a max DC off-state voltage of 275V. Ideal for protecting electronic devices from power surges in various applications.
TLP270G-1
TLP270G-1 by STMicroelectronics is a silicon surge protector designed for robust applications. It features a max breakdown voltage of 400 V, non-repetitive peak on-state current of 31 A, and a delta-connected configuration with three elements. Ideal for protecting sensitive electronics from voltage spikes.
NTVB300SC-L
NTVB300SC-L by Onsemi is a silicon surge protector with a max breakdown voltage of 400V. It has a trigger device type of SILICON SURGE PROTECTOR and operates b/w -40 °C to 150°C. Ideal for applications requiring protection against electrical surges in compact spaces.
TLP200MTR
TLP200MTR by STMicroelectronics is a silicon surge protector with 3 delta-connected elements. It features a non-repetitive peak on-state current of 31A and a max breakdown voltage of 290V. This surface-mount device in a small outline package is ideal for protecting electronic circuits from voltage surges.
TISP4240H3LMR
TISP4240H3LMR by Texas Instruments is a single silicon surge protector with 60A peak current and 180V off-state voltage. It is a thyristor surge protector suitable for applications requiring protection against electrical surges, with a temperature range of -40 to 150°C. The device has a cylindrical package style made of plastic/epoxy material, featuring two terminals in through-hole configuration.
TISP83121DR
TISP83121DR by Texas Instruments is a Silicon Surge Protector with 200mA DC Gate Trigger Current, 22A Non Repetitive Peak On-state Current, and 1.8V Max DC Gate Trigger Voltage. It is used for surge protection in applications requiring high current handling capabilities and surface mount compatibility.
TISP4070H3LP
TISP4070H3LP by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current and 70V max breakdown voltage. It features a cylindrical package style, wire terminals, and thyristor surge protection. Ideal for safeguarding electronic devices from power surges in various applications.
TISP5115H3BJR
TISP5115H3BJR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It operates b/w -40°C to 150°C, has a max breakdown voltage of 115V, and is UL recognized. Ideal for protecting electronic devices from power surges in various applications.
TPN3021RL
STMicroelectronics TPN3021RL is a 3-element silicon surge protector with 9A non-repetitive peak current. It features delta connection, 8 terminals, and operates b/w -55°C to 150°C. Ideal for surge protection applications in electronics due to its high breakdown voltage of 38V.
TISP7125F3D
TISP7125F3D by Texas Instruments is a silicon surge protector with 4.3A peak current, 100V DC off-state voltage, and 125V breakdown voltage. It features a delta connected configuration with 3 elements and is ideal for protecting electronic devices from power surges in various applications.
NP1100SET3G
NP1100SET3G by Onsemi is a Silicon Surge Protector with THYRISTOR technology. It has a max operating temp of 150 °C, min operating temp of -40°C, and max breakdown voltage of 130V. Ideal for protecting electronic devices from power surges in various applications.
TISP4145H3LP
TISP4145H3LP by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak current. Its cylindrical package contains a thyristor surge protector with 145V breakdown voltage, ideal for protecting electronic devices from power surges.
TISP4145H3LM
TISP4145H3LM by Texas Instruments is a single silicon surge protector with 60A peak current and 120V off-state voltage. It is a thyristor surge protector suitable for applications requiring protection against electrical surges, with an operating temperature range of -40 to 150°C.
TISP4165M3LM
TISP4165M3LM by Texas Instruments is a single silicon surge protector with a non-repetitive peak on-state current of 32A. It operates b/w -40°C to 150°C, featuring a max breakdown voltage of 165V. Ideal for applications requiring reliable overvoltage protection like telecommunications and industrial equipment.
NP3100GARLG
NP3100GARLG by Onsemi is a single silicon surge protector with 275V DC off-state voltage and 350V breakdown voltage. It features a thyristor surge protector configuration, suitable for applications requiring high holding current up to 150000mA. The package is made of plastic/epoxy material with tin terminal finish, UL recognized for use in isolated case connections.
NP1800SCMCT3G
NP1800SCMCT3G by Onsemi is a single silicon surge protector with a max DC off-state voltage of 170V and trigger device type as thyristor. It has a small outline package style, operates b/w -55 to 150 °C, and is ideal for UL recognized applications requiring protection against surges.
TISP4290M3LM
TISP4290M3LM by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, featuring a breakdown voltage of 290V. Ideal for UL-recognized applications requiring thyristor surge protection in plastic/epoxy packages.
2N4990
Thomson Consumer Electronics
SILICON SURGE PROTECTOR; Surface Mount: NO; Maximum Breakdown Voltage: 9 V; Minimum Operating Temperature: -55 Cel; Maximum Holding Current: 750 mA; Maximum On-state Voltage: 1.5 V;
TISP7150F3DR
TISP7150F3DR by Texas Instruments is a 3-element surge protector with 4.3A peak current, ideal for protecting circuits. With a max breakdown voltage of 150V and operating temperature range of 0-70°C, it's UL recognized and surface-mountable in plastic/epoxy package for efficient use.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTVB300SB-L
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Finish: Tin (Sn);
NTVB090NSA-L
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Time At Peak Reflow Temperature (s): 30;
NTVB275NSC-L
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Operating Temperature: 150 Cel;
NTVB220NSC-L
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Minimum Operating Temperature: -40 Cel;
NTVB180SA-L
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Moisture Sensitivity Level (MSL): 1;
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
NTVB058NSC-L
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-609 Code: e3;
NTVB200SC-L
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Shape: RECTANGULAR;
NTVB170NSC-L
NTVB270SC-L
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JEDEC-95 Code: DO-214AA;
NTVB270SA-L
NTVB170SC-L
NTVB300SA-L
NTVB065NSC-L
NTVB200SA-L
NTVB058NSB-L
NTVB065NSA-L
NTVB170SA-L
NTVB270SB-L
SILICON SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Peak Reflow Temperature (C): 260;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved