Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MUN5233T1G by Onsemi is a NPN BJT transistor with built-in resistor for switching applications. It has a max collector-emitter voltage of 50V, collector current of 0.1A, and power dissipation of 0.31W. This surface mount device comes in a small outline package ideal for compact electronic designs.
Median Price
$0.034
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.170
100+ parts
$0.063
1k+ parts
$0.040
10k+ parts
-
Mouser Electronics
$0.027
Future Electronics
$0.023
Rochester
$0.020
$0.017
$0.015
Verical
Master Electronics
Avnet
$0.016
RS (Exports)
$0.030
Arrow
$0.037
$0.024
Chip1Stop
Newark
$0.065
$0.044
Flip Electronics (Authorized)
Farnell
$0.050
$0.036
$0.032
Element14
$0.087
$0.056
$0.055
Digiode
Nova Conductors
$0.041
Bristol Electronics
$0.113
$0.011
TME
$0.150
$0.026
IBS Electronics
NAC Semi
Sensible Micro Corp
Vyrian
Chip Stock
Zilex Electronics Inc.
ComSIT Distribution GmbH
ComSIT USA
Cyclops Electronics Ltd
Microfarads
Q Components
Flip Electronics
ACDS - Activité Composants Distribution Service
Semicontronic
$0.012
Ampacity Inc.
Corohmni
Corphita
$0.022
Aranea Global
$0.039
Argo Parts USA
Aztec Data Supply Inc.
$0.890
Advanced Electronics
$2.194
$1.997
$1.799
Perfect Parts
Continental Prestige Electronics
$0.018
Authorized Procurement Solutions
GreenTree Electronics
Robosynatics
$1.238
$1.212
Lucentia Tech
QUARKTWIN TECHNOLOGY LTD
Component Connect
SupplyDigital Components
TANS Electronics
Infinite Electronics LLP (Excess)
Formix International (Excess)
Kulean Microsystems
Eastek
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Problanco Electronics
Lixinc
Metaverse IC Inc.
Kepictronics
UHIMA Technologies
Provides durability and protection to the transistor, making it suitable for a variety of applications.
Allows for easy integration into NPN circuits and ensures compatibility with other components.
Simplifies circuit design by integrating a resistor, saving space and reducing the need for additional components.
Optimized for switching applications, providing fast response times and efficient performance.
Enables easy and secure mounting on PCBs, facilitating automated assembly processes.
Standard rectangular shape for easy placement and soldering on PCBs.
Gull wing terminals provide secure contact points for reliable connections.
Simple 3-terminal design for straightforward circuit connections.
Can handle relatively high power dissipation, making it suitable for various applications.
Compact small outline package saves space on the PCB.
High minimum current gain ensures consistent and reliable performance in amplification applications.
Can operate in high-temperature environments, expanding its range of applications.
Can withstand up to 50V, suitable for a wide range of voltage requirements.
Silicon material offers high performance and reliability in electronic components.
Capable of handling up to 0.1A collector current for various current requirements.
Matte tin finish provides corrosion resistance and ensures a reliable electrical connection.
Dual terminal position offers flexibility in circuit design and component placement.
Specific time limit for peak reflow temperature ensures the integrity of the component during soldering processes.
High peak reflow temperature capability for lead-free soldering processes.
Small Signal Bipolar Junction Transistors (BJT) MUN5233T1G attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Onsemi
Additional Features:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
MUN5233T1G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Copper Wire 29/Oct/2009
PCN Assembly/Origin - Mult Dev 05/Dec/2019
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
Frontier Electronics
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N3904TAR
2N3904TAR by Onsemi is a NPN BJT transistor with max. power dissipation of 0.35W, hFE of 30, and fT of 300MHz. Ideal for switching applications due to its max. collector-emitter voltage of 40V and max. collector current of 0.2A. Package style is cylindrical with through-hole terminals.
BC847C
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .1 A;
2N2907A
Crimson Semiconductor
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .4 W; Maximum Collector Current (IC): .6 A;
BC547C
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .1 A; Maximum Collector-Emitter Voltage: 45 V; Qualification: Not Qualified;
2N3904BU
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; Package Shape: ROUND;
BC817-25
Siemens
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 170 MHz; Maximum Power Dissipation (Abs): .33 W; Maximum Collector Current (IC): .5 A;
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
JANTX2N2222AUBT/R
JANTX2N2222AUBT/R by Microchip is a NPN BJT transistor for switching applications. It has hFE of 30, Vce of 50V, and Ic of 0.8A. With a turn on time of 35ns and turn off time of 300ns, it's ideal for fast-switching circuits in military-grade electronics per MIL-19500/255 standards.
MMBT2222A,215
NXP Semiconductors
NXP Semiconductors' MMBT2222A,215 is a NPN BJT transistor with 40V VCEO and 0.6A IC. It has a hFE of 40, fT of 300MHz, and Ptot of 0.25W. Ideal for switching applications in small outline packages with Gull Wing terminals.
2N2905A
New England Semiconductor
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .6 W; Maximum Collector Current (IC): .6 A;
2N2907AUB
Tt Electronics Plc
PNP; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .6 A; Maximum Power Dissipation Ambient: .5 W; Package Body Material: UNSPECIFIED;
2N2222AUB
Optek Technology
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMBT3904
Electronic Devices
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; Package Style (Meter): SMALL OUTLINE;
MMBT2222A
Weitronic Enterprise
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A; Maximum Turn On Time (ton): 35 ns;
2N3904
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .1 A;
BC547C-G
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A;
MMBT3906LT1HTSA1
Infineon Technologies
Infineon's MMBT3906LT1HTSA1 is a PNP BJT transistor with 30 min hFE, ideal for switching applications. With a max VCE of 40V and IC of 0.2A, it operates up to 150°C. This surface-mount device has a rectangular package style and Gull Wing terminals, meeting AEC-Q101 standards for automotive use.
MMBT3906
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .2 A;
BC858B,215
Nexperia
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .1 A; JESD-609 Code: e3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MUN5311DW1T1G
MUN5311DW1T1G by Onsemi is a Small Signal BJT with NPN and PNP channels. It features 2 elements with built-in resistors, suitable for switching applications. With a max collector-emitter voltage of 50V and max operating temp of 150°C, it's ideal for surface mount designs requiring compactness.
MUN5214T1G
MUN5214T1G by Onsemi is a NPN BJT transistor with built-in resistor for switching applications. It has a max collector-emitter voltage of 50V, max collector current of 0.1A, and min DC current gain of 80. This small outline package with gull wing terminals operates up to 150°C, making it ideal for surface mount applications.
MUN5211T1G
MUN5211T1G by Onsemi is a NPN BJT with built-in resistor for switching applications. Features include hFE of 35, VCE of 50V, and IC of 0.1A. Its small outline package with Gull Wing terminals makes it suitable for surface mount designs in various electronic circuits.
MUN5211DW1T1G
MUN5211DW1T1G by Onsemi is a NPN BJT transistor with 2 elements and built-in resistor, ideal for switching applications. It has a max collector-emitter voltage of 50V, max collector current of 0.1A, and min DC current gain of 35. This small outline package with gull wing terminals operates up to 150°C, making it suitable for various electronic devices.
MUN5235DW1T1G
MUN5235DW1T1G by Onsemi is a NPN BJT transistor with VCEsat of 0.25V, hFE of 80, and IC of 0.1A. Ideal for switching applications, it has a max operating temp of 150°C and collector-emitter voltage of 50V. This small outline package features Gull Wing terminals and built-in resistors for efficient performance.
MUN5214DW1T1G
MUN5214DW1T1G by Onsemi is a NPN BJT transistor with 2 elements and built-in resistor. It has a max collector-emitter voltage of 50V, max collector current of 0.1A, and min DC current gain of 80. Ideal for switching applications due to its small outline package style and surface mount capability.
MUN5111T1G
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .31 W; Maximum Collector Current (IC): .1 A; Package Shape: RECTANGULAR;
MUN5313DW1T1G
MUN5313DW1T1G by Onsemi is a Small Signal BJT with NPN and PNP types, 2 elements with built-in resistor. Ideal for switching applications, it has a max collector-emitter voltage of 50V, max collector current of 0.1A, and min DC current gain of 80.
MUN5314DW1T1G
MUN5314DW1T1G by Onsemi is a Small Signal BJT with NPN and PNP types. It features 2 elements with built-in resistor, suitable for switching applications. With a max collector-emitter voltage of 50V and max current of 0.1A, it operates at up to 150°C peak reflow temperature.
MUN5235T1G
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .15 W; Maximum Collector Current (IC): .1 A; Transistor Element Material: SILICON;
MUN5112T1G
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .31 W; Maximum Collector Current (IC): .1 A; Package Style (Meter): SMALL OUTLINE;
MUN5335DW1T1G
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .385 W; Maximum Collector Current (IC): .1 A; Package Shape: RECTANGULAR;
MUN5213DW1T1G
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .385 W; Maximum Collector Current (IC): .1 A; Maximum Collector-Emitter Voltage: 50 V;
MUN5215T1G
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .31 W; Maximum Collector Current (IC): .1 A; Maximum Collector-Emitter Voltage: 50 V;
MUN5114T1G
MUN5114T1G by Onsemi is a PNP BJT with built-in resistor for switching applications. It has a max collector-emitter voltage of 50V, max collector current of 0.1A, and min DC current gain of 80. This surface-mount transistor operates up to 150°C, making it suitable for various electronic devices.
MUN5312DW1T1G
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .15 W; Maximum Collector Current (IC): .1 A; Qualification: Not Qualified;
MUN5113T3G
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .202 W; Maximum Collector Current (IC): .1 A; Peak Reflow Temperature (C): NOT SPECIFIED;
MUN5112T1
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .15 W; Maximum Collector Current (IC): .1 A; No. of Terminals: 3;
MUN5114DW1T1
PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .15 W; Maximum Collector Current (IC): .1 A; Package Body Material: PLASTIC/EPOXY;
MUN5233T3
Motorola
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Collector Current (IC): .1 A; Qualification: Not Qualified; No. of Terminals: 3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved