Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MUN5215T1G by Onsemi is a NPN BJT transistor with built-in resistor for switching applications. It has a max collector-emitter voltage of 50V, max collector current of 0.1A, and min DC current gain of 160. This small outline package with gull wing terminals operates up to 150°C, making it ideal for surface mount applications.
Median Price
$0.027
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Newark
1+ parts
$0.005
100+ parts
-
1k+ parts
10k+ parts
Rochester
$0.020
Mouser Electronics
$0.170
$0.063
$0.040
$0.030
EBV Elektronik
Chip1Stop
$0.026
Arrow
$0.028
Verical
Flip Electronics (Authorized)
DigiKey
Digiode
Vyrian
NAC Semi
$0.056
IBS Electronics
$0.033
Bristol Electronics
Cyclops Electronics Ltd
Chip Stock
Flip Electronics
Nova Conductors
Ampacity Inc.
$0.004
Corphita
Corohmni
Modulus Dynamics
$0.396
Aztec Data Supply Inc.
$1.502
Perfect Parts
Kepictronics
QUARKTWIN TECHNOLOGY LTD
Glotronic Ltd.
Authorized Procurement Solutions
Problanco Electronics
SupplyDigital Components
Argo Parts USA
Metaverse IC Inc.
Continental Prestige Electronics
Assy Fe
Lixinc
TANS Electronics
Aranea Global
Futuretech Components
UHIMA Technologies
Kulean Microsystems
The use of plastic/epoxy material for the package body makes the transistor lightweight and durable, ideal for portable electronic devices.
NPN transistors are commonly used in amplification and switching applications, making this transistor versatile for various circuit designs.
The built-in resistor simplifies circuit design by providing necessary resistance without requiring additional components, saving space and reducing costs.
Designed for switching applications, this transistor offers fast switching speeds and high efficiency, making it suitable for use in power management circuits.
Being surface mountable, this transistor is easy to integrate onto PCBs, enabling efficient assembly and saving space on the circuit board.
With a maximum power dissipation of 0.31W, this transistor can handle moderate power levels, ensuring reliable performance under varying load conditions.
The high minimum DC current gain ensures stable and consistent amplification of signals, making this transistor suitable for low-power and high-gain applications.
The 50V maximum collector-emitter voltage rating allows this transistor to be used in circuits with higher voltage requirements, increasing its application range.
With a maximum collector current of 0.1A, this transistor can handle moderate current levels, making it suitable for various switching and amplification tasks.
Small Signal Bipolar Junction Transistors (BJT) MUN5215T1G attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Onsemi
Additional Features:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
MUN5215T1G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Copper Wire 29/Oct/2009
PCN Assembly/Origin - Mult Dev 05/Dec/2019
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
2N7002-7-F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
1N4148W-7-F
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
2N3904
Silicon Standard
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .2 A;
MMBT3904
Vishay Semiconductors
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; JEDEC-95 Code: TO-236AB;
MMBT2222A
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .6 A; Terminal Finish: TIN; No. of Elements: 1;
BC847B
Yangzhou Yangjie Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 200;
2N2907A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Minimum Operating Temperature: -55 Cel;
JANTX2N2222AUA/TR
Microchip Technology
JANTX2N2222AUA/TR by Microchip is a NPN BJT transistor with hFE of 30, Vce of 50V, and Ic of 0.8A. Ideal for switching applications due to its fast ton of 35ns and toff of 300ns. It comes in a small outline package suitable for surface mount technology.
JANTX2N2222AUA
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .8 A; No. of Terminals: 4; Terminal Form: NO LEAD;
BC847B,235
Nexperia
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .1 A;
BC858B,215
BC858B,215 by NXP Semiconductors is a PNP BJT for switching applications. With VCEsat of 0.65V and hFE of 220, it operates at max 150°C with IC of 0.1A. Its small outline package makes it suitable for surface mount designs.
BC846B
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .1 A; Package Shape: RECTANGULAR;
Samsung
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): .6 A;
BC547-B
Infineon Technologies
BC547-B by Infineon Technologies is a NPN BJT transistor with a min hFE of 200, ideal for switching applications. It has a max IC of 0.1A and can operate at temperatures up to 150°C. The transistor comes in a cylindrical package with through-hole terminals, making it suitable for various electronic circuits.
BC847C
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .1 A;
BC817-25
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Terminal Finish: TIN;
MMBT2222ALT1
Shandong Yiguang Electronic Joint Stock
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
MMBT3906
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): .2 A;
2N3906
Kec
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A;
Fairchild Semiconductor
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Position: BOTTOM;
Zowie Technology
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MUN5311DW1T1G
MUN5311DW1T1G by Onsemi is a Small Signal BJT with NPN and PNP channels. It features 2 elements with built-in resistors, suitable for switching applications. With a max collector-emitter voltage of 50V and max operating temp of 150°C, it's ideal for surface mount designs requiring compactness.
MUN5214T1G
MUN5214T1G by Onsemi is a NPN BJT transistor with built-in resistor for switching applications. It has a max collector-emitter voltage of 50V, max collector current of 0.1A, and min DC current gain of 80. This small outline package with gull wing terminals operates up to 150°C, making it ideal for surface mount applications.
MUN5211T1G
MUN5211T1G by Onsemi is a NPN BJT with built-in resistor for switching applications. Features include hFE of 35, VCE of 50V, and IC of 0.1A. Its small outline package with Gull Wing terminals makes it suitable for surface mount designs in various electronic circuits.
MUN5211DW1T1G
MUN5211DW1T1G by Onsemi is a NPN BJT transistor with 2 elements and built-in resistor, ideal for switching applications. It has a max collector-emitter voltage of 50V, max collector current of 0.1A, and min DC current gain of 35. This small outline package with gull wing terminals operates up to 150°C, making it suitable for various electronic devices.
MUN5235DW1T1G
MUN5235DW1T1G by Onsemi is a NPN BJT transistor with VCEsat of 0.25V, hFE of 80, and IC of 0.1A. Ideal for switching applications, it has a max operating temp of 150°C and collector-emitter voltage of 50V. This small outline package features Gull Wing terminals and built-in resistors for efficient performance.
MUN5233T1G
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .31 W; Maximum Collector Current (IC): .1 A; Additional Features: BUILT-IN BIAS RESISTOR RATIO IS 10;
MUN5214DW1T1G
MUN5214DW1T1G by Onsemi is a NPN BJT transistor with 2 elements and built-in resistor. It has a max collector-emitter voltage of 50V, max collector current of 0.1A, and min DC current gain of 80. Ideal for switching applications due to its small outline package style and surface mount capability.
MUN5111T1G
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .31 W; Maximum Collector Current (IC): .1 A; Package Shape: RECTANGULAR;
MUN5313DW1T1G
MUN5313DW1T1G by Onsemi is a Small Signal BJT with NPN and PNP types, 2 elements with built-in resistor. Ideal for switching applications, it has a max collector-emitter voltage of 50V, max collector current of 0.1A, and min DC current gain of 80.
MUN5314DW1T1G
MUN5314DW1T1G by Onsemi is a Small Signal BJT with NPN and PNP types. It features 2 elements with built-in resistor, suitable for switching applications. With a max collector-emitter voltage of 50V and max current of 0.1A, it operates at up to 150°C peak reflow temperature.
MUN5235T1G
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .15 W; Maximum Collector Current (IC): .1 A; Transistor Element Material: SILICON;
MUN5112T1G
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .31 W; Maximum Collector Current (IC): .1 A; Package Style (Meter): SMALL OUTLINE;
MUN5335DW1T1G
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .385 W; Maximum Collector Current (IC): .1 A; Package Shape: RECTANGULAR;
MUN5213DW1T1G
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .385 W; Maximum Collector Current (IC): .1 A; Maximum Collector-Emitter Voltage: 50 V;
MUN5114T1G
MUN5114T1G by Onsemi is a PNP BJT with built-in resistor for switching applications. It has a max collector-emitter voltage of 50V, max collector current of 0.1A, and min DC current gain of 80. This surface-mount transistor operates up to 150°C, making it suitable for various electronic devices.
MUN5312DW1T1G
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .15 W; Maximum Collector Current (IC): .1 A; Qualification: Not Qualified;
MUN5113T3G
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .202 W; Maximum Collector Current (IC): .1 A; Peak Reflow Temperature (C): NOT SPECIFIED;
MUN5112T1
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .15 W; Maximum Collector Current (IC): .1 A; No. of Terminals: 3;
MUN5114DW1T1
PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .15 W; Maximum Collector Current (IC): .1 A; Package Body Material: PLASTIC/EPOXY;
MUN5215T1
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Collector Current (IC): .1 A; Transistor Element Material: SILICON; No. of Terminals: 3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved