Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MUN2116T1G by Onsemi is a PNP BJT with built-in resistor for switching applications. It has a min hFE of 160, max VCE of 50V, and max IC of 0.1A. This surface-mount transistor comes in a small outline package with Gull Wing terminals, ideal for compact electronic designs.
Median Price
$0.030
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.230
100+ parts
$0.131
1k+ parts
$0.055
10k+ parts
$0.035
Rochester
-
$0.026
$0.021
$0.019
DigiKey
Verical
Digiode
$0.024
Vyrian
$0.025
Flip Electronics
Chip Stock
Corphita
$0.022
Corohmni
Component Stockers USA
$0.020
Continental Prestige Electronics
$0.018
Problanco Electronics
SupplyDigital Components
TANS Electronics
Kulean Microsystems
UHIMA Technologies
Durable and reliable material for housing the transistor.
Suitable for applications requiring PNP transistors.
Saves space and simplifies circuit design by including a built-in resistor.
Optimized for switching applications, enhancing performance in such scenarios.
Enables easy mounting on PCBs, saving assembly time and space.
Compact shape that fits well in modern electronic devices.
Facilitates easy soldering and connection in surface mount applications.
Simplifies circuit connection with a minimal number of terminals.
Capable of handling moderate power levels, ensuring reliability in operation.
Compact package style suitable for space-constrained applications.
Ensures consistent and reliable amplification in circuits.
Suitable for low to moderate voltage applications, ensuring safe operation.
Reliable and widely used material for transistor elements.
Capable of handling moderate current levels in circuits.
Corrosion-resistant finish for terminals, ensuring long-term reliability.
Facilitates easy and secure connection in the circuit layout.
Small Signal Bipolar Junction Transistors (BJT) MUN2116T1G attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Onsemi
Additional Features:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
MUN2116T1G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Dev 24/Apr/2020
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
Plessey Semiconductors Discrete Components Div
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1554216002
Molex
WIRE AND CABLE;
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
2N6517BU
2N6517BU by Onsemi is a NPN BJT with max. collector-emitter voltage of 350V, max. collector current of 0.5A, and min. DC current gain of 15. It is used in applications requiring small signal amplification due to its high transition frequency of 40MHz and max. power dissipation of 0.625W in a cylindrical package style.
BC547B
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A;
2N3904
Renesas Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 540 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .2 A;
SBC846ALT1G
SBC846ALT1G by Onsemi is a NPN BJT with VCEsat of 0.6V, hFE of 110, and fT of 100MHz. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance and max operating temp of 150°C.
BC817-25
Siemens
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 170 MHz; Maximum Power Dissipation (Abs): .33 W; Maximum Collector Current (IC): .5 A;
2N2222AUB
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Body Material: CERAMIC, METAL-SEALED COFIRED;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .33 W; Maximum Collector Current (IC): .5 A;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
BC817-40WT1G
BC817-40WT1G by Onsemi is a NPN BJT transistor with hFE of 40, Vce of 45V, and fT of 100MHz. Ideal for small signal applications in electronics due to its high transition frequency and low collector current rating. Its Gull Wing terminals and small outline package make it suitable for surface mount PCB designs.
BC547C
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 420;
Nexperia
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Minimum DC Current Gain (hFE): 160;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; Maximum Collector-Emitter Voltage: 40 V; Transistor Element Material: SILICON;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY;
BC846B
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .1 A;
2N2907A
Silicon Transistor
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .4 W; Maximum Collector Current (IC): .6 A;
MMBT2222A
Zowie Technology
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): .6 A;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 150 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A;
Baneasa S A
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Package Style (Meter): CYLINDRICAL; No. of Terminals: 3; Terminal Position: BOTTOM;
2N2219A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .8 W; Maximum Collector Current (IC): .8 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MUN2211T1G
MUN2211T1G by Onsemi is a NPN BJT with built-in resistor for switching applications. It has a max collector-emitter voltage of 50V, max collector current of 0.1A, and min DC current gain of 35. This small outline transistor operates up to 150°C and is surface mountable in a rectangular package shape.
MUN2233T1G
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .338 W; Maximum Collector Current (IC): .1 A; Package Shape: RECTANGULAR;
MUN2116T3
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Collector Current (IC): .1 A; Package Style (Meter): SMALL OUTLINE; Transistor Element Material: SILICON;
MUN2112T1
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .1 A; Additional Features: BUILT-IN BIAS RESISTOR RATIO IS 1;
MUN2114T1
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .1 A; JESD-609 Code: e0;
MUN2116T1
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .1 A; Transistor Application: SWITCHING;
MUN2113T1G
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .338 W; Maximum Collector Current (IC): .1 A; JESD-609 Code: e3;
MUN2130T1
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .1 A; Package Shape: RECTANGULAR;
MUN2111T1G
MUN2114T1G
MUN2114T1G by Onsemi is a PNP BJT with 3 terminals, max. power dissipation of 0.338W, and hFE of 80. Ideal for switching applications, it has a max. collector-emitter voltage of 50V and max. collector current of 0.1A. The package is surface mountable with Gull Wing terminals in a small outline style.
MUN2112T1G
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .338 W; Maximum Collector Current (IC): .1 A; Peak Reflow Temperature (C): 260;
MUN2114T3
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .1 A; Peak Reflow Temperature (C): 235;
MUN2115T3
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Collector Current (IC): .1 A; Terminal Finish: TIN LEAD; Package Style (Meter): SMALL OUTLINE;
MUN2113T1
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .1 A; No. of Terminals: 3;
MUN2111T3G
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .338 W; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 35;
MUN2115T1
MUN2113T3
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Collector Current (IC): .1 A; Package Style (Meter): SMALL OUTLINE; Terminal Form: GULL WING;
MUN2111T1
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .1 A; Terminal Position: DUAL;
MUN2111T3
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .1 A; Maximum Collector-Emitter Voltage: 50 V;
Motorola
PNP; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Maximum Collector Current (IC): .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Package Style (Meter): SMALL OUTLINE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved