Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Onsemi's AR0237SRSC12SHRA0-DR is a 1/2.7 inch CMOS image sensor with 1928x1088 pixels, offering 60 fps frame rate. Housed in a square plastic package, it features a 2-wire interface for surface mount applications in various imaging devices.
Median Price
$34.495
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
$14.290
100+ parts
$11.175
1k+ parts
$10.445
10k+ parts
-
Chip1Stop
$54.700
$25.900
$16.100
Digiode
$14.193
Vyrian
$14.940
Flip Electronics
Chip Stock
Native Components
$0.263
$0.252
Northwest PG Solutions
$0.289
$0.255
Corphita
$13.446
Corohmni
Perfect Parts
TANS Electronics
SupplyDigital Components
Kulean Microsystems
Kepictronics
Authorized Procurement Solutions
GreenTree Electronics
Problanco Electronics
UHIMA Technologies
The large body width allows for more surface area for better heat dissipation, which can improve overall performance and longevity.
CMOS sensors provide high-quality images with low power consumption, making them ideal for devices where battery life is a concern.
The slim body height allows for a compact design, which is important for integration into small devices or where space is limited.
The square package shape offers a more uniform distribution of components, which can lead to better overall performance and reliability.
With a high horizontal pixel count, this image sensor can capture detailed images with crisp resolution.
Plastic housing is lightweight and durable, making the product suitable for various applications where weight is a concern.
The high vertical pixel count allows for capturing images with a higher level of detail and clarity.
The compact body length/diameter makes this image sensor easy to integrate into different devices or applications.
The 1/2.7-inch optical format offers a good balance between size and performance, making it versatile for various imaging needs.
Solder termination provides a reliable and secure connection, ensuring proper functionality of the image sensor in various conditions.
A 2-wire interface simplifies the connection process and allows for easy integration with other components or systems.
A high frame rate of 60 fps ensures smooth and high-quality video capture, making this image sensor suitable for applications where motion is involved.
A frame array type offers efficient image capturing and processing, allowing for quick and accurate image data transmission.
The surface mounting feature simplifies the installation process and allows for easy integration into various devices or systems.
Image Sensors AR0237SRSC12SHRA0-DR attributes and parameters. Explore more Image Sensors devices from Onsemi
Additional Features:
Array Type:
Body Width:
Body Height:
Body Length/Diameter:
Frame Rate:
Horizontal Pixel:
Housing:
Mounting Feature:
Optical Format (inch):
Output Interface Type:
Package Shape or Style:
Sensors or Transducers Type:
Termination Type:
Vertical Pixel:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Hitano Enterprise
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
KAI-0340-ABB-CP-AA
KAI-0340-ABB-CP-AA by Onsemi is an image sensor with 7.4x7.4 um pixel size, 640 horizontal pixels, and 480 vertical pixels. It operates b/w -50 to 70 °C with a supply voltage range of 14.75V to 15.25V. Ideal for applications requiring a CCD image sensor with a dynamic range of 62 dB in a ceramic, glass-sealed housing.
MT9M001C12STM-DR1
Onsemi's MT9M001C12STM-DR1 image sensor features 5.2x5.2 um pixel size, 3V to 3.6V supply voltage range, and 48 MHz master clock. Ideal for digital cameras, surveillance systems, and industrial imaging applications due to its high resolution of 1280x1024 pixels and square package style with a ceramic housing.
NOIP1SE5000A-QDI
NOIP1SE5000A-QDI by Onsemi is a 1-inch CMOS image sensor with a pixel size of 4.8X4.8 um. It has a max supply voltage of 1.9V and operates at temperatures ranging from -40 to 85 °C. This sensor is commonly used in applications requiring high-resolution imaging at a frame rate of up to 100 fps.
KAE-02150-FBA-JP-FA
IMAGE SENSOR,CCD;
KAI-0340S
Image Sensors;
AR0221SR2C00SUEA0-DPBR1
Onsemi's AR0221SR2C00SUEA0-DPBR1 is a 1928x1088 CMOS image sensor with 1/1.7" optical format, offering 60 fps frame rate. Ideal for surface mount applications, it features a 2-wire interface and solder termination type.
KAI-1003-AAA-CR-B2
KAI-1003-AAA-CR-B2 by Onsemi is an image sensor with 1024x1024 pixels, 12.8um pixel size, and 72dB dynamic range. It operates b/w 0 to 40°C and has a supply voltage range of 14.5V to 15.5V. Ideal for applications requiring high-quality imaging in various environments.
MT9M001C12STM-DP
MT9M001C12STM-DP by Onsemi is an image sensor with 5.2x5.2 um pixel size, 48 MHz master clock, and 1280x1024 resolution. Ideal for digital cameras, surveillance systems, and industrial imaging applications due to its high dynamic range of 68.2 dB and frame rate of 30 fps.
AR0233AT2B17XUEA0-DRBR-E
Onsemi's AR0233AT2B17XUEA0-DRBR-E is a CMOS image sensor with 2048x1280 resolution, 41.58 dB dynamic range, and MIPI output interface. Ideal for applications requiring high-quality imaging at 60 fps, such as surveillance cameras and automotive vision systems.
OV09724-A28A
Omnivision Technologies
CMV4000-3E5M1PN
Ams Ag
CMV4000-3E5M1PN by Ams Ag is an IMAGE SENSOR with a 60 dB dynamic range and 37 fps frame rate. It operates b/w -30°C to 70°C, featuring SPI INTERFACE output. Ideal for applications requiring high sensitivity (5.56 V/lx.s) such as industrial imaging and surveillance systems.
AR0833CS3C12SUAA0-DP
Onsemi's AR0833CS3C12SUAA0-DP is a 1/3.2-inch CMOS image sensor with 3264x2448 pixels, offering a max supply voltage of 1.3V and a master clock of 24 MHz. Ideal for digital current output applications, it operates b/w -30 to 70 °C and features a dynamic range of 64 dB.
AMIS-710200-A4
Image Sensors; Vertical Pixel: 1; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: 0 Cel; Power Supplies (V): 5; Horizontal Pixel: 1728;
KAF-1603-ABA-CD-B2
The Onsemi KAF-1603-ABA-CD-B2 is a CCD image sensor with 9x9 um pixel size, offering 1536 horizontal and 1024 vertical pixels. It operates b/w -60 to 60 °C, with a dynamic range of 74 dB. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
MT9M413C36STM
The Onsemi MT9M413C36STM is a 12x12 um CMOS image sensor with 1280H x 1024V pixels. Operating at 66 MHz, it has a max supply voltage of 3.6 V and frame rate of 500 fps. Ideal for applications requiring high-resolution imaging in industrial automation and surveillance systems.
KAI-2001M
AR0220AT4R00XUEA1-VL-TPBM
The Onsemi AR0220AT4R00XUEA1-VL-TPBM is a CMOS image sensor with 1828x948 pixels, 1/1.8" optical format, and 60 fps frame rate. It features digital output and a 2-wire interface, suitable for applications in surveillance cameras, automotive vision systems, and industrial imaging.
TSL208R
Ams-taos Usa
IMAGE SENSOR,CCD; Mounting Feature: PANEL MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 1.60-2.40V; Body Height: 3.35 mm;
NOIV1SN1300A-QDC
NOIV1SN1300A-QDC by Onsemi is an image sensor with 1280x1024 resolution, 4.80x4.80 um pixel size, and 62 MHz master clock. Ideal for applications requiring high-speed imaging such as machine vision systems or industrial cameras due to its 150 fps frame rate and CMOS sensor technology.
NOIX1SF012KB-LTI
NOIX1SF012KB-LTI by Onsemi is an Image Sensor with 3.2X3.2 um pixel size, 32.4 MHz master clock, and 4096 horizontal pixels. Ideal for applications requiring a digital voltage output interface, such as high-speed imaging systems or machine vision cameras.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AR0234CSSM00SUKA0-CP1
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.4-1.26V; Maximum Supply Voltage: 1.26 V;
AR0234CSSC00SUKA0-CP1
The Onsemi AR0234CSSC00SUKA0-CP1 image sensor features 1920x1200 resolution, 3x3 um pixel size, and 71.4 dB dynamic range. It is ideal for applications requiring high-quality digital imaging such as surveillance cameras, automotive vision systems, and drones due to its compact rectangular package and 120 fps frame rate.
AR0234CSSC28SUKA0-CP1
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.4-1.26V; Optical Format (inch): 1/2.6;
AR0234CSSM00SUKA0-CP
Onsemi's AR0234CSSM00SUKA0-CP is a CMOS image sensor with 1920x1200 resolution, 3x3 um pixel size, and 71.4 dB dynamic range. It operates at -40 to 85 °C, outputs digital voltage from 0.4-1.26V, and has a frame rate of 120 fps. Ideal for applications requiring high-resolution imaging in automotive or surveillance systems.
AR0234CSSM28SUKA0-CP1
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.4-1.26V; Dynamic Range: 71.4 dB;
AR0234CSSC00SUKA0-CP
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.4-1.26V; Frame Rate: 120 fps;
AR0234CSSC28SUKA0-CP
AR0234CSSC28SUKA0-CP by Onsemi is a CMOS image sensor with 1920x1200 resolution, 3x3 um pixel size, and 71.4 dB dynamic range. It operates at -40 to 85 °C and has a frame rate of 120 fps. Ideal for applications requiring high-quality digital imaging in automotive, surveillance, or industrial settings.
AR0231AT7C00XUEA0-DPBR-E
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL OUTPUT; Package Shape or Style: RECTANGULAR; Array Type: LINEAR; Output Interface Type: 2-WIRE INTERFACE;
AR0234CSSM00SUKA0-CR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.4-1.26V; Termination Type: SOLDER;
AR0234CSSC00SUKA0-CR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.4-1.26V; Pixel Size (um): 3X3;
AR0234CSSC28SUKA0-CR
AR023ZMCSC00SUEA0-DRBR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.40-1.50V; Body Width: 10 inch;
AR0239SRSC00SUEA0-DP
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; JESD-609 Code: e1; Vertical Pixel: 1188; Pixel Size (um): 3X3; Output Interface Type: 2-WIRE INTERFACE;
AR0230CSSC00SUEA0-DRBR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.40-1.50V; Output Interface Type: 2-WIRE INTERFACE;
AR0238CSSC12SHRA0-DP1
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: SQUARE; Output Range: -22-22mA; Minimum Operating Temperature: -30 Cel;
AR0239SRSC00SUEA0-DPBR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Frame Rate: 90 fps; Vertical Pixel: 1188; Pixel Size (um): 3X3; Array Type: SINGLE FRAME;
AR0220AT4R00XUEA1-TPBM
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL OUTPUT; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Array Type: FRAME;
AR0221SR2C00SUEA0-DRBR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Frame Rate: 60 fps; Array Type: FRAME; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
AR0220AT3R00XUEA0-DRBR
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.40-1.20V; Body Width: 9 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved