Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Image Sensors; Horizontal Pixel: 1728; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: 0 Cel; Vertical Pixel: 1; Power Supplies (V): 5;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Native Components
$0.157
$0.151
Northwest PG Solutions
$0.173
$0.153
SupplyDigital Components
TANS Electronics
Kulean Microsystems
Corphita
UHIMA Technologies
Problanco Electronics
Corohmni
Image Sensors AMIS-710206-A4 attributes and parameters. Explore more Image Sensors devices from Onsemi
Horizontal Pixel:
Maximum Operating Temperature:
Minimum Operating Temperature:
Power Supplies (V):
Sub-Category:
Vertical Pixel:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6401TRPBF
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
Nexperia
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
Sangdest Microelectronics (Nanjing)
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
TC285SPD-30
Texas Instruments
TC285SPD-30 by Texas Instruments is an image sensor with 8x8 um pixel size, 1004 horizontal pixels, and 1002 vertical pixels. Operating at temperatures from -10 to 55 °C, it requires a power supply of 14V. Ideal for applications requiring high-resolution imaging in various environments.
NOIP1SE5000A-QTI
NOIP1SE5000A-QTI by Onsemi is a 4.8x4.8 um CMOS image sensor with 2592x2048 pixels, offering a dynamic range of 60 dB and sensitivity of 7.5 V/lx.s. It operates b/w -40 to 85 °C, has a max supply voltage of 1.9 V, and supports a frame rate of up to 100 fps. Ideal for applications requiring high-resolution imaging in various lighting conditions.
AR0144CSSM20SUKA0-CPBR1
The Onsemi AR0144CSSM20SUKA0-CPBR1 is a 1280x800 CMOS image sensor with a 1/4-inch optical format. It features a 2-wire interface, solder termination, and surface mounting for applications in digital cameras, smartphones, and automotive imaging systems.
CMV2000-3E5C1PP
Ams Ag
CMV2000-3E5C1PP by Ams Ag is a 2/3-inch CMOS image sensor with 2048x1088 pixels, offering a high dynamic range of 90 dB. With a pixel size of 5.5um, it operates b/w -30°C to 70°C and features an SPI interface for fast data transfer. Ideal for applications requiring high-speed imaging such as machine vision and industrial inspection.
MT9M001C12STC-DR
Onsemi's MT9M001C12STC-DR is a 5.2x5.2 um CMOS image sensor with 1280x1024 resolution, operating at 48 MHz master clock. It offers a dynamic range of 68.2 dB and outputs digital voltage signals via a 2-wire interface. Ideal for applications requiring high-quality imaging at up to 30 fps in a compact square package.
KAI-16070-QXA-JD-B1
Onsemi's KAI-16070-QXA-JD-B1 image sensor features 7.4X7.4 um pixel size, 40 MHz master clock, and 70.5 dB dynamic range. Ideal for applications requiring high-resolution imaging with a max supply voltage of 15.5 V and operating temperature range from -50 to 70 °C.
KAI-11002-ABA-CD-B1
The Onsemi KAI-11002-ABA-CD-B1 is an image sensor with 9x9 um pixel size, 4008 horizontal pixels, and 2672 vertical pixels. It operates at a supply voltage range of 14.5V to 15.5V, offering a dynamic range of 28 dB. Ideal for applications requiring high-resolution imaging in industrial or scientific settings.
AR0138AT3B00XUD20
The Onsemi AR0138AT3B00XUD20 is a 1/2.6-inch CMOS image sensor with 1288x968 resolution, offering 69 fps frame rate. Ideal for surface mount applications, it features a 2-wire interface and single-frame array type, making it suitable for high-speed imaging in various industries.
MT9V128IA3XTC-DR1
IMAGE SENSOR,CMOS; JESD-609 Code: e1; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
AR1335CSSC32SMD20
The Onsemi AR1335CSSC32SMD20 is a 1/3.2 inch CMOS image sensor with a pixel size of 1.1um. It operates at a max supply voltage of 1.3V and has a master clock of 48 MHz. This sensor is commonly used in applications that require high-resolution imaging with a frame rate of up to 30 fps.
KAI-0373-ABA-CB-AE
KAI-0373-ABA-CB-AE by Onsemi is an image sensor with 768x484 pixels, 11.6X13.6 um pixel size, and 60 dB dynamic range. It operates b/w -25 to +40 °C and has a supply voltage range of 14.5V to 15.5V. Ideal for applications requiring high-quality imaging in industrial automation and surveillance systems due to its CCD technology and rectangular package style.
MT9V032C12STM-DP
Onsemi's MT9V032C12STM-DP is a 1/3-inch CMOS image sensor with 6x6 um pixel size. It operates at 26.6 MHz master clock, offering 752 (H) x 480 (V) resolution for applications requiring high-quality digital imaging at up to 60 fps frame rate. Ideal for surface mounting in devices needing -30 to 70 °C temperature range and a dynamic range of 54.4 dB.
AR0331SRSC00SUCA0-DRBR1
The Onsemi AR0331SRSC00SUCA0-DRBR1 is a 2.2x2.2 um CMOS image sensor with 2048 (H) x 1536 (V) pixels, offering a dynamic range of 100 dB and sensitivity of 1.9 V/lx.s. It operates at temperatures ranging from -30 to 85 °C, with a max supply voltage of 1.95 V and frame rate of 60 fps, making it ideal for high-resolution imaging applications.
AMIS-70700
AMIS-70700 by Onsemi is a CMOS image sensor with 10.6x10.6 um pixel size, offering 60 dB dynamic range and 750x400 resolution. Operating at -40 to 105 °C, it has a digital voltage output type and supports up to 20 Mbps data rate. Ideal for full-frame applications in imaging systems requiring high-quality visuals.
KAI-02050-AAA-JR-BA
Onsemi's KAI-02050-AAA-JR-BA is a 5.5x5.5 um CCD image sensor with 1600H x 1200V pixels, offering a dynamic range of 64 dB. Operating b/w -50 to 70 °C, it has a supply voltage range of 14.5V to 15.5V and is ideal for digital imaging applications requiring high-quality output in a compact rectangular package.
KAF-09000-ABA-DD-AE
The Onsemi KAF-09000-ABA-DD-AE is a 3056x3056 pixel CCD image sensor with 12x12 um pixel size. It operates b/w -60 to 60 °C and offers a dynamic range of 84 dB. Ideal for high-resolution imaging applications, it features a spectral response of 300-1100 nm and data rate of 10 Mbps.
AR0231AT7C00XUEA0-DRBR-E
Onsemi's AR0231AT7C00XUEA0-DRBR-E is a CMOS image sensor with 3um pixel size, 27 MHz master clock, and 120dB dynamic range. Ideal for digital cameras, surveillance systems, and automotive applications due to its high resolution and fast frame rate of 60fps.
KAI-11002-ABA-CP-B2
KAI-11002-ABA-CP-B2 by Onsemi is an image sensor with 9x9 um pixel size, 4008 horizontal pixels, and 2672 vertical pixels. It operates b/w -50 to 70 °C and has a dynamic range of 66 dB. Ideal for applications requiring high-resolution imaging in various industries.
AR0237IRSH12SHRA0-DR-E
The Onsemi AR0237IRSH12SHRA0-DR-E image sensor features 1928x1088 resolution, 3x3 um pixel size, and 96 dB dynamic range. Ideal for applications requiring high-quality imaging such as surveillance cameras, automotive vision systems, and industrial machine vision.
MT9V022I77ATC
MT9V022I77ATC by Onsemi is a 1/3-inch CMOS image sensor with 752x480 pixels. It operates at 26.6 MHz master clock, offers a dynamic range of 54.4 dB, and supports a frame rate of 60 fps. Ideal for applications requiring high-resolution imaging in industrial and automotive sectors.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AMIS-710240
Image Sensors; Horizontal Pixel: 1728; Minimum Operating Temperature: 0 Cel; Power Supplies (V): 5; Maximum Operating Temperature: 50 Cel;
AMIS-710223-A6
Image Sensors; Power Supplies (V): 5; Horizontal Pixel: 832; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 50 Cel;
AMIS-710201
Image Sensors; Horizontal Pixel: 1728; Power Supplies (V): 5; Vertical Pixel: 1; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 50 Cel;
AMIS-710229
IMAGE SENSOR,CMOS; Maximum Operating Temperature: 50 Cel; Power Supplies (V): 5; Horizontal Pixel: 1728; Minimum Operating Temperature: 0 Cel;
AMIS-710225
Image Sensors; Horizontal Pixel: 832; Power Supplies (V): 5; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: 0 Cel;
AMIS-710214
Image Sensors; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: 0 Cel; Power Supplies (V): 5; Horizontal Pixel: 1728;
AMIS-710249-A6
Image Sensors; Minimum Operating Temperature: 0 Cel; Horizontal Pixel: 832; Maximum Operating Temperature: 50 Cel; Power Supplies (V): 5;
AMIS70700AAA
Image Sensors; Mounting Feature: SURFACE MOUNT; Power Supplies (V): 3.3; Maximum Operating Temperature: 105 Cel; Horizontal Pixel: 750; Minimum Operating Temperature: -40 Cel;
AMIS-710224-A6
Image Sensors; Horizontal Pixel: 832; Maximum Operating Temperature: 50 Cel; Power Supplies (V): 5; Minimum Operating Temperature: 0 Cel;
AMIS-710205-A4
Image Sensors; Horizontal Pixel: 1728; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 50 Cel; Power Supplies (V): 5; Vertical Pixel: 1;
AMIS-710228
IMAGE SENSOR,CMOS; Horizontal Pixel: 1728; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 50 Cel; Power Supplies (V): 5;
AMIS-710226
Image Sensors; Horizontal Pixel: 1728; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: 0 Cel; Power Supplies (V): 5; Vertical Pixel: 1;
AMIS-710208-A7
Image Sensors; Vertical Pixel: 1; Minimum Operating Temperature: 0 Cel; Horizontal Pixel: 704; Power Supplies (V): 5; Maximum Operating Temperature: 50 Cel;
AMIS-710239-A3
Image Sensors; Power Supplies (V): 5; Maximum Operating Temperature: 50 Cel; Horizontal Pixel: 2432; Minimum Operating Temperature: 0 Cel;
AMIS-710200-A4
Image Sensors; Vertical Pixel: 1; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: 0 Cel; Power Supplies (V): 5; Horizontal Pixel: 1728;
AMIS-710216
Image Sensors; Power Supplies (V): 5; Minimum Operating Temperature: 0 Cel; Horizontal Pixel: 704; Maximum Operating Temperature: 50 Cel;
IMAGE SENSOR,CMOS; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: SQUARE; Output Range: 0.40V; Horizontal Pixel: 750;
AMIS-710200
Image Sensors; Horizontal Pixel: 1728; Minimum Operating Temperature: 0 Cel; Vertical Pixel: 1; Maximum Operating Temperature: 50 Cel; Power Supplies (V): 5;
AMIS-710227
IMAGE SENSOR,CMOS; Power Supplies (V): 5; Minimum Operating Temperature: 0 Cel; Horizontal Pixel: 1728; Maximum Operating Temperature: 50 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved