Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi SBC846BWT1G is a NPN BJT with max power dissipation of 0.15W, hFE of 200, and fT of 100MHz. Ideal for small signal applications in electronics due to its single configuration, surface mount capability, and max collector current of 0.1A.
Median Price
$0.044
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.180
100+ parts
$0.068
1k+ parts
$0.043
10k+ parts
-
Mouser Electronics
$0.210
$0.078
$0.049
$0.034
Adafruit Industries
$1.340
$1.273
Flip Electronics (Authorized)
Avnet
$0.025
Verical
$0.022
RS (Exports)
$0.031
$0.023
Arrow
$0.016
Farnell
$0.058
$0.042
$0.033
Element14
$0.114
$0.072
$0.071
Chip1Stop
$0.012
Flip Electronics
$0.011
Digiode
$0.104
TME
$0.160
$0.065
$0.039
$0.028
Nova Conductors
$1.000
Vyrian
Chip Stock
Sensible Micro Corp
NAC Semi
$0.021
Q Components
Bristol Electronics
Ampacity Inc.
$0.014
Semicontronic
Corohmni
Argo Parts USA
$0.041
Modulus Dynamics
$0.047
$0.046
$0.045
Corphita
$0.099
Aztec Data Supply Inc.
$0.802
Netroflash
$0.980
Advanced Electronics
Infinite Electronics LLP (Excess)
RC Electronics
$0.040
GreenTree Electronics
Perfect Parts
Authorized Procurement Solutions
Eastek
Allen Electronics Distributors
$0.019
Continental Prestige Electronics
$0.032
$0.030
Futuretech Components
Lixinc
Problanco Electronics
TANS Electronics
SupplyDigital Components
Kulean Microsystems
Robosynatics
$0.092
Lucentia Tech
UHIMA Technologies
NPN transistors are commonly used for amplification and switching applications, making this product versatile and suitable for a wide range of electronic circuits.
Single configuration simplifies circuit design and reduces complexity, making it easier to integrate into various electronic projects.
Surface mount package allows for easy and efficient soldering on PCBs, making it suitable for compact and space-constrained designs.
With a maximum power dissipation of 0.15W, this transistor can handle moderate power levels, ensuring reliable performance and preventing overheating.
A minimum DC current gain of 200 indicates high amplification capability, making this transistor ideal for signal amplification applications.
Operating temperature up to 150°C allows for reliable performance in a wide range of temperature conditions, suitable for diverse applications.
With a maximum collector current of 0.1A, this transistor can handle moderate current levels, making it suitable for various electronic circuits.
Matte tin terminal finish provides enhanced solderability and corrosion resistance, ensuring reliable electrical connections.
Peak reflow temperature of 260°C for up to 30 seconds allows for efficient soldering during manufacturing processes, ensuring high-quality assembly.
High transition frequency of 100MHz indicates excellent high-frequency performance, making this transistor suitable for RF and fast-switching applications.
Small Signal Bipolar Junction Transistors (BJT) SBC846BWT1G attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Onsemi
Maximum Collector Current (IC):
Configuration:
Minimum DC Current Gain (hFE):
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
Maximum Operating Temperature:
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Sub-Category:
Surface Mount:
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
Nominal Transition Frequency (fT):
SBC846BWT1G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Green Compound Update 04/Mar/2015
PCN Assembly/Origin - Bond Wire 07/Mar/2020
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
STM32F407VGT6
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710KL
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
ULN2803AFWG
Toshiba
Toshiba's ULN2803AFWG is an NPN BJT with 8 Darlington banks, built-in diode and resistor. Ideal for switching applications, it has a max IC of 0.5A and VCE of 50V. With a hFE of 1000, this surface-mount transistor comes in a small outline package shape.
2N2222AUA
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Maximum Collector Current (IC): .8 A; Transistor Element Material: SILICON;
BC817-25
NPN; Configuration: SINGLE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 150 Cel; No. of Elements: 1;
MMBT2222AWT1G
MMBT2222AWT1G by Onsemi is a NPN BJT transistor with 3 terminals, ideal for amplifier applications. It has a max collector-emitter voltage of 40V, max collector current of 0.6A, and min DC current gain of 40. With a package style of small outline and surface mount capability, it operates at up to 150°C.
2N3904TF
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; Package Style (Meter): CYLINDRICAL;
JANTX2N2222AUA
Semicoa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
BC847BPN,115
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .1 A; Package Body Material: PLASTIC/EPOXY;
BC817-25QAZ
Small Signal Bipolar Transistors; Maximum Time At Peak Reflow Temperature (s): 30; Reference Standard: AEC-Q101; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN; JESD-609 Code: e3;
2N2907A
Crimson Semiconductor
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .4 W; Maximum Collector Current (IC): .6 A;
ULN2003AIPWR
Texas Instruments
ULN2003AIPWR by Texas Instruments is a NPN BJT with 7 elements, max. collector current of 0.5A, and max. collector-emitter voltage of 50V. It's used for switching applications in surface mount setups due to its complex configuration and small outline package style.
MMBT3906
Bytesonic Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .2 A;
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Microsemi
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): .01 A;
MMBT2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; Package Shape: RECTANGULAR;
MMBT3904
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 270 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A;
2N2219A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .8 W; Maximum Collector Current (IC): .8 A;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): .2 A;
BC846B
Yangzhou Yangjie Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .1 A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SBC817-40LT1G
SBC817-40LT1G by Onsemi is a NPN BJT transistor with 250 min hFE, 45V VCEO, and 100MHz fT. Ideal for switching applications, it has a max power dissipation of 0.3W and operates up to 150°C. The small outline package with gull wing terminals makes it suitable for surface mount designs.
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .5 A;
SBC817-25LT1G
SBC817-25LT1G by Onsemi is a NPN BJT with 45V VCEO, 0.5A IC, and 160 hFE. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance and 100MHz fT. Features GULL WING terminals in a SMALL OUTLINE package.
SBC846BLT1G
SBC846BLT1G by Onsemi is a NPN BJT transistor with max VCEsat of 0.6V, hFE of 200, and fT of 100MHz. Ideal for small signal applications in automotive electronics due to AEC-Q101 standard compliance and max operating temp of 150°C.
SBC846BDW1T1G
SBC846BDW1T1G by Onsemi is a NPN BJT with 2 elements, ideal for amplifier applications. It has a max collector-emitter voltage of 65V, min DC current gain of 200 (hFE), and operates up to 150°C. This small outline transistor features a max power dissipation of 0.38W in a rectangular package with Gull Wing terminals.
SBC807-40LT1G
SBC807-40LT1G by Onsemi is a PNP BJT transistor for switching applications. It has VCEsat of 0.7V, hFE of 250, and IC of 0.5A. With a max operating temperature of 150°C, it is ideal for small outline packages in automotive electronics.
SBC846ALT1G
SBC846ALT1G by Onsemi is a NPN BJT with VCEsat of 0.6V, hFE of 110, and fT of 100MHz. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance and max operating temp of 150°C.
SBC807-25LT1G
SBC807-25LT1G by Onsemi is a PNP small signal bipolar junction transistor (BJT) with a max VCEsat of 0.7V, min DC current gain (hFE) of 160, and max collector-emitter voltage of 45V. It is commonly used for switching applications in various industries.
SBC847CDW1T1G
SBC847CDW1T1G by Onsemi is a NPN BJT with 2 elements, ideal for amplifier applications. It has a max power dissipation of 0.38W, hFE of 420, and Vce of 45V. With a package style of small outline and surface mount capability, it operates b/w -55 to 150°C.
SBC817-40LT3G
SBC817-40LT3G by Onsemi is a NPN BJT transistor with 250 min hFE, 45V VCEO, and 100MHz fT. Ideal for switching applications, it has a max power dissipation of 0.3W and operates up to 150°C. Suitable for surface mount designs with Gull Wing terminals in a small outline package.
SBC856BLT1G
SBC856BLT1G by Onsemi is a PNP BJT with 3 terminals, hFE of 220, and VCE max of 65V. Ideal for small outline applications, it operates b/w -55 to 150°C and has a transition frequency of 100MHz.
SBC847BLT1G
SBC847BLT1G by Onsemi is a NPN BJT with VCEsat of 0.6V, hFE of 200, and IC of 0.1A. Ideal for small signal applications in automotive electronics due to AEC-Q101 certification and operating temperature range from -55 to 150°C.
SBC846BPDW1T1G
SBC846BPDW1T1G by Onsemi is a Small Signal BJT with NPN and PNP types. It has 2 elements, 6 terminals, and operates as an amplifier. With a max VCEsat of 0.65V, it can handle up to 0.1A IC at 65V VCE. Ideal for applications requiring high DC current gain and low power dissipation in a small outline package.
SBC847BPDXV6T1G
SBC847BPDXV6T1G by Onsemi is a Small Signal BJT with NPN and PNP polarity, suitable for amplifier applications. It features 2 elements in a rectangular package with 6 terminals, offering a min hFE of 200 and max VCE of 45V. With a power dissipation of 0.5W and operating temperature range from -55 to 150°C, it meets AEC-Q101 standards.
SBC857BLT1G
SBC857BLT1G by Onsemi is a PNP BJT with 3 terminals, hFE of 220, and VCE of 45V. Ideal for small signal applications in automotive electronics due to AEC-Q101 certification and operating temperature range from -55 to 150°C. Package style is small outline with Gull Wing terminals for surface mount assembly.
SBC847BPDW1T1G
SBC847BPDW1T1G by Onsemi is a Small Signal BJT with NPN and PNP channels, ideal for amplifier applications. It features a max VCEsat of 0.65V, min hFE of 200, and max operating temp of 150°C. With a package style of small outline and peak reflow temp at 260°C, it meets AEC-Q101 standards.
SBC847CLT1G
SBC847CLT1G by Onsemi is a NPN BJT transistor with max VCEsat of 0.6V, hFE of 420, and IC of 0.1A. Ideal for small signal applications in automotive electronics due to AEC-Q101 standard compliance and max operating temp of 150°C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved