Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SBC847BPDW1T1G by Onsemi is a Small Signal BJT with NPN and PNP channels, ideal for amplifier applications. It features a max VCEsat of 0.65V, min hFE of 200, and max operating temp of 150°C. With a package style of small outline and peak reflow temp at 260°C, it meets AEC-Q101 standards.
Median Price
$0.066
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Arrow
1+ parts
$0.050
100+ parts
-
1k+ parts
10k+ parts
Farnell
$0.082
$0.055
$0.046
Element14
$0.139
$0.080
$0.079
Chip1Stop
$0.040
$0.038
Rochester
$0.042
$0.035
$0.031
Verical
$0.110
$0.072
Digiode
$0.033
Nova Conductors
TME
$0.120
$0.052
$0.036
$0.030
Flip Electronics
ComSIT Distribution GmbH
Chip Stock
Vyrian
Bristol Electronics
NAC Semi
$0.069
IBS Electronics
Manotoh
Component Sense
Semicontronic
$0.029
Ampacity Inc.
Corphita
$0.032
Corohmni
Argo Parts USA
$0.102
$0.099
Bastille Electronics
$0.104
$0.098
Component Stockers USA
$0.240
$0.060
Continental Prestige Electronics
$0.445
$0.166
$0.085
$0.057
Aztec Data Supply Inc.
$1.090
Advanced Electronics
$1.866
$1.773
Perfect Parts
Eastek
$0.150
Lixinc
iBuyXS LLC
SupplyDigital Components
Authorized Procurement Solutions
Kepictronics
Problanco Electronics
Infinite Electronics LLP (Excess)
Kulean Microsystems
TANS Electronics
Robosynatics
Lucentia Tech
UHIMA Technologies
Plastic/epoxy packaging provides durable protection for the transistor, making it reliable and long-lasting.
Having both NPN and PNP types allows for flexibility in different circuit configurations and applications.
Low VCEsat ensures efficient operation and minimal power loss in amplifier circuits.
Six terminals provide sufficient connectivity options for different circuit layouts and connections.
With a high power dissipation rating, this transistor can handle increased power levels without overheating.
Low collector-base capacitance reduces the risk of signal distortion and improves performance in high-frequency applications.
High transition frequency enables fast switching speeds and high-frequency operation, suitable for amplifier applications.
Small Signal Bipolar Junction Transistors (BJT) SBC847BPDW1T1G attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Onsemi
Maximum Collector Current (IC):
Maximum Collector-Base Capacitance:
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Reference Standard:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
Maximum VCEsat:
SBC847BPDW1T1G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Green Compound Update 04/Mar/2015
PCN Assembly/Origin - Mult Dev Wire Qual 29/Aug/2019
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
Semitronics
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DP83848IVVX/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
KYOCERA AVX
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
M85049/85-08W02
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
BC817-40
Rectron
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Minimum DC Current Gain (hFE): 250;
BC547B
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 150 MHz; Maximum Collector Current (IC): .1 A; No. of Elements: 1;
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
FMMT493TA
Diodes Incorporated
FMMT493TA by Diodes Inc. is a NPN BJT transistor with 3 terminals, suitable for switching applications. It has a max collector-emitter voltage of 100V, max collector current of 1A, and min DC current gain of 20. With a package style of small outline and surface mount capability, it operates up to 150°C and has a transition frequency of 150MHz.
2N2222AUA
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Collector Current (IC): .8 A; Maximum Turn Off Time (toff): 300 ns; Transistor Element Material: SILICON;
2N2907A
Electronic Transistors
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .4 W; Maximum Collector Current (IC): .6 A;
BC817-25
ROHM
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 150 MHz; Maximum Power Dissipation (Abs): .33 W; Maximum Collector Current (IC): .8 A;
Panjit International
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Transistor Application: AMPLIFIER;
MMBT3904Q-7-F
MMBT3904Q-7-F by Diodes Inc. is a NPN BJT transistor for switching applications. It has a VCEsat of 0.3V, hFE of 30, and can handle IC up to 0.2A. With a max operating temperature of 150°C, it is ideal for small outline surface mount designs requiring fast switching speeds.
BC847CDW1T1G
BC847CDW1T1G by Onsemi is a NPN BJT with 2 elements, hFE of 420. It operates up to 150°C, VCE of 45V, and IC of 0.1A. Ideal for amplifier applications due to its small outline package and high transition frequency of 100MHz.
Weitronic Enterprise
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A;
BC817-40,235
NXP Semiconductors
NXP Semiconductors' BC817-40,235 is a NPN BJT transistor for switching applications. With VCEsat of 0.7V and hFE of 250, it can handle IC up to 0.5A. Operating at 150°C max temp, it's ideal for small outline packages in surface mount configurations.
2N3906
Itt Semiconductor
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A;
MMBT2907A-7-F
Diodes Inc. MMBT2907A-7-F is a PNP BJT transistor with 60V VCEO, 0.6A IC, and 200MHz fT. Ideal for switching applications in automotive electronics due to AEC-Q101 compliance and small outline package.
MMBT2222A
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): 1 A;
BC547CTFR
BC547CTFR by Onsemi is a NPN BJT transistor with max. collector-emitter voltage of 45V, min. DC current gain of 420, and max. power dissipation of 0.625W. It is commonly used for switching applications due to its single configuration and cylindrical package shape.
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
KSP13TA
NPN; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 125 MHz; Maximum Collector Current (IC): .5 A; Minimum DC Current Gain (hFE): 10000;
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 200;
MMBT3906TT1G
MMBT3906TT1G by Onsemi is a PNP small signal BJT transistor with a max collector-emitter voltage of 40V. It has a min DC current gain of 30 and can handle a max collector current of 0.2A. This transistor is commonly used in amplifier applications due to its high transition frequency of 250MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SBC817-40LT1G
SBC817-40LT1G by Onsemi is a NPN BJT transistor with 250 min hFE, 45V VCEO, and 100MHz fT. Ideal for switching applications, it has a max power dissipation of 0.3W and operates up to 150°C. The small outline package with gull wing terminals makes it suitable for surface mount designs.
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .5 A;
SBC817-25LT1G
SBC817-25LT1G by Onsemi is a NPN BJT with 45V VCEO, 0.5A IC, and 160 hFE. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance and 100MHz fT. Features GULL WING terminals in a SMALL OUTLINE package.
SBC846BLT1G
SBC846BLT1G by Onsemi is a NPN BJT transistor with max VCEsat of 0.6V, hFE of 200, and fT of 100MHz. Ideal for small signal applications in automotive electronics due to AEC-Q101 standard compliance and max operating temp of 150°C.
SBC846BDW1T1G
SBC846BDW1T1G by Onsemi is a NPN BJT with 2 elements, ideal for amplifier applications. It has a max collector-emitter voltage of 65V, min DC current gain of 200 (hFE), and operates up to 150°C. This small outline transistor features a max power dissipation of 0.38W in a rectangular package with Gull Wing terminals.
SBC807-40LT1G
SBC807-40LT1G by Onsemi is a PNP BJT transistor for switching applications. It has VCEsat of 0.7V, hFE of 250, and IC of 0.5A. With a max operating temperature of 150°C, it is ideal for small outline packages in automotive electronics.
SBC846ALT1G
SBC846ALT1G by Onsemi is a NPN BJT with VCEsat of 0.6V, hFE of 110, and fT of 100MHz. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance and max operating temp of 150°C.
SBC807-25LT1G
SBC807-25LT1G by Onsemi is a PNP small signal bipolar junction transistor (BJT) with a max VCEsat of 0.7V, min DC current gain (hFE) of 160, and max collector-emitter voltage of 45V. It is commonly used for switching applications in various industries.
SBC847CDW1T1G
SBC847CDW1T1G by Onsemi is a NPN BJT with 2 elements, ideal for amplifier applications. It has a max power dissipation of 0.38W, hFE of 420, and Vce of 45V. With a package style of small outline and surface mount capability, it operates b/w -55 to 150°C.
SBC817-40LT3G
SBC817-40LT3G by Onsemi is a NPN BJT transistor with 250 min hFE, 45V VCEO, and 100MHz fT. Ideal for switching applications, it has a max power dissipation of 0.3W and operates up to 150°C. Suitable for surface mount designs with Gull Wing terminals in a small outline package.
SBC856BLT1G
SBC856BLT1G by Onsemi is a PNP BJT with 3 terminals, hFE of 220, and VCE max of 65V. Ideal for small outline applications, it operates b/w -55 to 150°C and has a transition frequency of 100MHz.
SBC846BWT1G
The Onsemi SBC846BWT1G is a NPN BJT with max power dissipation of 0.15W, hFE of 200, and fT of 100MHz. Ideal for small signal applications in electronics due to its single configuration, surface mount capability, and max collector current of 0.1A.
SBC847BLT1G
SBC847BLT1G by Onsemi is a NPN BJT with VCEsat of 0.6V, hFE of 200, and IC of 0.1A. Ideal for small signal applications in automotive electronics due to AEC-Q101 certification and operating temperature range from -55 to 150°C.
SBC846BPDW1T1G
SBC846BPDW1T1G by Onsemi is a Small Signal BJT with NPN and PNP types. It has 2 elements, 6 terminals, and operates as an amplifier. With a max VCEsat of 0.65V, it can handle up to 0.1A IC at 65V VCE. Ideal for applications requiring high DC current gain and low power dissipation in a small outline package.
SBC847BPDXV6T1G
SBC847BPDXV6T1G by Onsemi is a Small Signal BJT with NPN and PNP polarity, suitable for amplifier applications. It features 2 elements in a rectangular package with 6 terminals, offering a min hFE of 200 and max VCE of 45V. With a power dissipation of 0.5W and operating temperature range from -55 to 150°C, it meets AEC-Q101 standards.
SBC857BLT1G
SBC857BLT1G by Onsemi is a PNP BJT with 3 terminals, hFE of 220, and VCE of 45V. Ideal for small signal applications in automotive electronics due to AEC-Q101 certification and operating temperature range from -55 to 150°C. Package style is small outline with Gull Wing terminals for surface mount assembly.
SBC847CLT1G
SBC847CLT1G by Onsemi is a NPN BJT transistor with max VCEsat of 0.6V, hFE of 420, and IC of 0.1A. Ideal for small signal applications in automotive electronics due to AEC-Q101 standard compliance and max operating temp of 150°C.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved