Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUX84BA by Onsemi is a NPN Power BJT with max. VCE of 400V, IC of 2A, and hFE of 30. Ideal for switching applications, it operates up to 150 °C with fT of 4MHz. The transistor comes in a plastic/epoxy package with through-hole terminals in a rectangular shape suitable for flange mounting.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Problanco Electronics
Corphita
Kulean Microsystems
TANS Electronics
Native Components
SupplyDigital Components
Corohmni
UHIMA Technologies
Northwest PG Solutions
Provides good insulation and protection for the transistor, ensuring reliable performance and durability.
NPN transistors are commonly used in switching applications, making this transistor suitable for a variety of applications.
Simplifies circuit design and installation, making it easier to integrate into electronic systems.
Designed specifically for switching applications, ensuring efficient and reliable operation in those scenarios.
Allows for easy mounting and installation in electronic devices and circuit boards.
Simple connection with only three terminals, reducing complexity in circuit design.
Can handle higher voltages, making it suitable for applications requiring higher voltage switching.
High collector current rating allows for handling higher current loads, expanding its range of applications.
High transition frequency allows for fast switching speeds, critical in many applications.
Power Bipolar Junction Transistors (BJT) BUX84BA attributes and parameters. Explore more Power Bipolar Junction Transistors (BJT) devices from Onsemi
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
BUX84BA Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138DW-7-F
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
1554216004
Molex
WIRE AND CABLE;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MJD117T4G
MJD117T4G by Onsemi is a PNP power BJT with 100V VCEO, 2A IC, and 20W max power dissipation. Ideal for switching applications, it features a Darlington configuration with built-in diode and resistor in a small outline package. With a transition frequency of 25MHz and operating temperature up to 150°C, it offers high performance in compact designs.
TIP127
Motorola
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 5 A;
SPC TECHNOLOGY/ MULTICOMP
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 5 A; Package Shape: RECTANGULAR;
TIP110
Semiconductors
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Maximum Operating Temperature: 150 Cel;
ULN2003APW
ULN2003APW by Texas Instruments is a NPN BJT with 7 elements and 16 terminals. It has a max collector-emitter voltage of 50V and max collector current of 0.5A, suitable for switching applications. This surface-mount transistor in small outline package is made of silicon with nickel/palladium/gold terminal finish.
TIP111
TIP111 by Texas Instruments is a NPN Darlington BJT with max power dissipation of 50W. It has min hFE of 500 and max VCE of 80V, ideal for high-power applications in flange mount packages. Suitable for switching and amplification tasks due to its silicon transistor element material and single terminal position.
BD140-16
Continental Device India
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 75 MHz; Maximum Power Dissipation (Abs): 13 W; Maximum Collector Current (IC): 1.5 A;
TIP127TU
TIP127TU by Onsemi is a PNP power BJT with 100V VCEO, 5A IC, and 65W Ptot. Ideal for switching applications, it features a Darlington configuration with built-in diode and resistor in a plastic/epoxy package. Operating up to 150°C, this transistor has hFE of at least 1000 for efficient performance.
MJE340
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb);
Power Innovations
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 4 A; Minimum DC Current Gain (hFE): 500; Maximum Collector-Emitter Voltage: 60 V;
Nte Electronics
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; JESD-30 Code: R-PSFM-T3;
2N3055H
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): .8 MHz; Maximum Collector Current (IC): 15 A; Maximum Collector-Emitter Voltage: 60 V;
TIP31C
Bourns
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 3 A; Maximum Operating Temperature: 150 Cel;
TIP120
Weitron Technology
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 5 A; Maximum Collector-Emitter Voltage: 60 V; Package Style (Meter): FLANGE MOUNT;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
2N3055
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): .8 MHz; Maximum Power Dissipation (Abs): 115 W; Maximum Collector Current (IC): 15 A;
TIP36C
Taitron Components
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Collector Current (IC): 25 A; JESD-30 Code: R-PSFM-T3;
MJE3055TG
MJE3055TG by Onsemi is a NPN BJT with max. power dissipation of 75W, max. collector-emitter voltage of 60V, and max. collector current of 10A. Ideal for switching applications due to its single configuration and flange mount package style.
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 2 A; Minimum DC Current Gain (hFE): 500; Terminal Form: THROUGH-HOLE;
TIP117
Samsung
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Minimum DC Current Gain (hFE): 500;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BUX87
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Nominal Transition Frequency (fT): 20 MHz; Maximum Collector Current (IC): .5 A; Maximum Collector-Emitter Voltage: 450 V; No. of Elements: 1;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Terminal Position: SINGLE; Package Style (Meter): FLANGE MOUNT;
NXP Semiconductors
The NXP Semiconductors BUX87 is a single NPN power BJT transistor with a max VCEsat of 1V, ideal for switching applications. With a max collector-emitter voltage of 450V and a max power dissipation of 20W, it operates at temperatures up to 150°C. This silicon-based transistor has a min DC current gain of 26 and can handle a max collector current of 0.5A.
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 20 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): .5 A;
BUX85G
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 2 A;
BUX84BU
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Maximum Collector-Emitter Voltage: 400 V;
BUX84AN
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Transistor Element Material: SILICON;
BUX84DW
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Maximum Operating Temperature: 150 Cel;
BUX84AS
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Terminal Form: THROUGH-HOLE;
BUX85AJ
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; JESD-30 Code: R-PSFM-T3;
BUX85
BUX84AU
BUX84BS
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Case Connection: COLLECTOR;
BUX84AK
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Package Style (Meter): FLANGE MOUNT;
BUX84BV
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Terminal Position: SINGLE;
BUX85AF
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; JESD-609 Code: e0;
BUX84AF
BUX84BC
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Package Body Material: PLASTIC/EPOXY;
BUX84BD
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Terminal Finish: TIN LEAD;
BUX84
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 12 MHz; Maximum Collector Current (IC): 2 A; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved