Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUX84AK by Onsemi is a NPN Power BJT with max. Vce of 400V, Ic of 2A, and hFE of 30. Ideal for switching applications due to its single configuration and high transition frequency of 4MHz. Packaged in plastic/epoxy with through-hole terminals for easy mounting.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
Corphita
TANS Electronics
Corohmni
Northwest PG Solutions
UHIMA Technologies
Native Components
Provides durability and protection for the transistor, making it suitable for various environments.
NPN transistors are commonly used for amplification and switching applications.
Simplifies circuit design and makes it easy to use in different applications.
Designed specifically for switching applications, providing efficient control over the flow of current.
Easily fits into standard circuit layouts and makes it compatible with various devices.
Simple and easy to connect in circuits, reducing complexity in wiring.
Can handle high voltage levels, making it suitable for various power applications.
Capable of handling high currents, making it suitable for power applications.
High transition frequency allows for fast switching speeds in applications.
Power Bipolar Junction Transistors (BJT) BUX84AK attributes and parameters. Explore more Power Bipolar Junction Transistors (BJT) devices from Onsemi
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
BUX84AK Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Starsea Electronics
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
Micro Commercial Components
Infinex
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
JAN2N3055
Api Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 2.5 MHz; Maximum Power Dissipation (Abs): 115 W; Maximum Collector Current (IC): 15 A;
BUV48A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Maximum Collector Current (IC): 15 A; No. of Elements: 1; Maximum Collector-Emitter Voltage: 450 V; Transistor Element Material: SILICON;
TIP122
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 20 MHz; Maximum Collector Current (IC): 8 A; JEDEC-95 Code: TO-220AB;
TIP142
NPN; Configuration: SINGLE; Maximum Collector Current (IC): 10 A; Maximum Collector-Emitter Voltage: 100 V; Transistor Element Material: SILICON; Minimum DC Current Gain (hFE): 500;
ZTX851
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): 5 A; No. of Elements: 1;
2N3055
Vpt Components
BD679A
Comset Semiconductors
NPN; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): .06 MHz; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 4 A;
TIP125
Central Semiconductor
PNP; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 5 A;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
TIP29C
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 30 W; Maximum Collector Current (IC): 1 A;
BUX87
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Terminal Position: SINGLE; Package Style (Meter): FLANGE MOUNT;
BD140G
The Onsemi BD140G is a PNP BJT transistor with 80V VCE, 1.5A IC, and 12.5W power dissipation. Ideal for amplifier applications, it has a min hFE of 25 and operates up to 150°C. The package is through-hole with matte tin finish in a rectangular shape.
TIP111
NPN; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 25 MHz; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A;
D44H8
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 8 A;
BCP56-16T1G
BCP56-16T1G by Onsemi is a NPN Power BJT with 80V VCEO, 1A IC, and 130MHz fT. Ideal for amplifier applications, it comes in a small outline package with Gull Wing terminals. With a max operating temp of 150°C and hFE of 100, it offers high performance in a compact design.
TIP31C
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 3 A;
BDX53C
Power Innovations
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 8 A; Package Body Material: PLASTIC/EPOXY; Package Style (Meter): FLANGE MOUNT;
BD679
BD679 by Onsemi is a NPN Power BJT with 40W power dissipation, ideal for amplifier applications. Featuring a Darlington configuration, it has hFE of 750 and can handle up to 80V collector-emitter voltage. This transistor operates at temperatures up to 150°C in a through-hole package style.
Rectron
NPN; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Collector Current (IC): 1 A; Package Body Material: PLASTIC/EPOXY;
BD140-16
NXP Semiconductors
BD140-16 by NXP Semiconductors is a PNP power BJT transistor with max VCEsat of 0.5V, hFE of 100, and IC of 1.5A. Ideal for amplifier applications, it has a max operating temp of 150°C and can handle up to 8W power dissipation in a flange mount package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NPN; Configuration: SINGLE; Nominal Transition Frequency (fT): 20 MHz; Maximum Collector Current (IC): .5 A; Maximum Collector-Emitter Voltage: 450 V; No. of Elements: 1;
The NXP Semiconductors BUX87 is a single NPN power BJT transistor with a max VCEsat of 1V, ideal for switching applications. With a max collector-emitter voltage of 450V and a max power dissipation of 20W, it operates at temperatures up to 150°C. This silicon-based transistor has a min DC current gain of 26 and can handle a max collector current of 0.5A.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 20 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): .5 A;
BUX85G
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 2 A;
BUX84BU
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Maximum Collector-Emitter Voltage: 400 V;
BUX84AN
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Transistor Element Material: SILICON;
BUX84DW
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Maximum Operating Temperature: 150 Cel;
BUX84AS
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Terminal Form: THROUGH-HOLE;
BUX85AJ
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; JESD-30 Code: R-PSFM-T3;
BUX85
BUX84AU
BUX84BS
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Case Connection: COLLECTOR;
BUX84BV
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Terminal Position: SINGLE;
BUX85AF
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; JESD-609 Code: e0;
BUX84BA
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Package Style (Meter): FLANGE MOUNT;
BUX84AF
BUX84BC
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Package Body Material: PLASTIC/EPOXY;
BUX84BD
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 2 A; Terminal Finish: TIN LEAD;
BUX84
Motorola
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved