Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MJD122G by Onsemi is a NPN Power BJT with 100V VCEO, 8A IC, and 20W Ptot. Ideal for switching applications, it features a Darlington configuration with built-in diode and resistor in a small outline package. Suitable for surface mount assembly with a max operating temperature of 150°C.
Median Price
$0.906
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
Rochester
1+ parts
$0.458
100+ parts
$0.430
1k+ parts
$0.389
10k+ parts
-
Farnell
$0.466
$0.251
$0.200
$0.168
Newark
$1.190
$0.485
$0.449
Mouser Electronics
$1.350
$0.560
Arrow
$1.459
$0.395
Chip1Stop
$1.550
Element14
$1.570
$0.716
$0.638
$0.626
DigiKey
$1.620
$0.718
$0.535
$0.409
Verical
$0.515
$0.481
Master Electronics
$0.616
$0.438
$0.408
Future Electronics
$0.465
$0.435
$0.420
EBV Elektronik
Avnet
RS (Exports)
$0.622
$0.605
$0.575
Digiode
$0.404
Nova Conductors
$0.533
TME
$1.500
$0.682
$0.619
$0.581
Component Electronics Inc.
$1.540
$1.150
$1.000
IBS Electronics
$0.870
$0.561
NAC Semi
$0.930
$0.846
Electro Sonic
$0.490
$0.469
$0.406
Chip Stock
ComSIT Distribution GmbH
ComSIT USA
Vyrian
MISTER SPROCKETS
ACDS - Activité Composants Distribution Service
A2Z Electronics, Inc.
Bristol Electronics
LWI Electronics Inc
Corel Iberica Componentes, S.L.
Micros
$0.573
Cyclops Electronics Ltd
Atlantic Semiconductor
Holdelec - ElecDif-Pro
LIBRA Elektronik GmbH
Ampacity Inc.
$0.361
Corphita
$0.382
Corohmni
$0.425
Component Stockers USA
$0.450
$0.390
$0.380
$0.370
Argo Parts USA
$0.484
$0.470
Benley Electronics
$0.500
Bastille Electronics
$0.506
$0.474
Semicontronic
$0.790
$0.770
$0.766
Continental Prestige Electronics
$0.804
$0.530
$0.371
$0.323
Aztec Data Supply Inc.
$1.050
Advanced Electronics
$1.245
$1.133
$1.021
Modulus Dynamics
$1.612
Metaverse IC Inc.
RC Electronics
Robosynatics
Lucentia Tech
$0.889
$0.871
Perfect Parts
Eastek
Lixinc
Authorized Procurement Solutions
QUARKTWIN TECHNOLOGY LTD
SupplyDigital Components
Kepictronics
Problanco Electronics
A-Z Elektronik GmbH
iodParts Technologies Inc.
TANS Electronics
Kulean Microsystems
Allen Electronics Distributors
UHIMA Technologies
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Assy Fe
S.R.D Solutions
GreenTree Electronics
Provides durability and protection for the transistor, ensuring a long lifespan.
Efficiently amplifies current flow in the NPN configuration.
Built-in diode and resistor make it easy to integrate into circuits without additional components.
Ideal for switching applications due to its fast response time and high power dissipation.
Easy to mount on PCBs, saving space and simplifying assembly process.
Can handle high power levels without overheating, making it reliable for demanding applications.
Simplified connectivity with only two terminals, reducing complexity in circuit design.
Operates reliably at high temperatures, suitable for industrial environments.
High voltage rating allows for use in circuits with varying voltage levels.
Capable of handling high current loads, making it versatile for different applications.
High operating frequency allows for fast switching speeds and efficient performance.
Power Bipolar Junction Transistors (BJT) MJD122G attributes and parameters. Explore more Power Bipolar Junction Transistors (BJT) devices from Onsemi
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
MJD122G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
NSN
5961-01-580-8111, 5961015808111
NIIN
015808111
PCN Assembly/Origin - Assembly /Test Change 11/Apr/2023
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Digitron Semiconductors
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Taiwan Semiconductor
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
BAV99W-7-F
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
Itt Semiconductor
BAV99-7-F
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
TIP31C
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 30 W; Maximum Collector Current (IC): 3 A;
TIP42A
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A;
TIP50
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 10 MHz; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 1 A;
TIP122
Diotec Semiconductor Ag
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): 5 A; Moisture Sensitivity Level (MSL): 1; JESD-30 Code: R-PSFM-T3;
TIP122G
TIP122G by Onsemi is a NPN power BJT with 100V VCEO, 5A IC, and 65W Ptot. Ideal for amplifier applications, it features a Darlington configuration with built-in diode and resistor in a plastic/epoxy package. With an hFE of 1000 and fT of 4MHz, this transistor operates up to 150°C.
JAN2N3055
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 117 W; Maximum Collector Current (IC): 15 A; Terminal Position: BOTTOM;
BDW93C
Central Semiconductor
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 80 W; Maximum Collector Current (IC): 12 A; Terminal Finish: Tin/Lead (Sn/Pb);
TIP127
Transys Electronics
PNP; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 2 W; Maximum Collector Current (IC): 5 A; Package Style (Meter): FLANGE MOUNT;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 10 MHz; Maximum Collector Current (IC): 1 A; Package Body Material: PLASTIC/EPOXY;
2N3055
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 2.5 MHz; Maximum Power Dissipation (Abs): 115 W; Maximum Collector Current (IC): 15 A;
JAN2N3055 by Microchip Tech is a NPN BJT transistor with max. collector-emitter voltage of 70V, max. collector current of 15A, and min. DC current gain of 20. It's used for switching applications in military standards like MIL-19500/407D, featuring a round package style with flange mount and tin lead terminal finish.
MJ11015G
New Jersey Semiconductor Products
PNP; Configuration: SINGLE; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 30 A; No. of Elements: 1; Maximum Collector-Emitter Voltage: 120 V;
TIP147
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Collector Current (IC): 10 A; No. of Elements: 1;
TIP142T
NPN; Configuration: SINGLE; Maximum Collector Current (IC): 10 A; Maximum Collector-Emitter Voltage: 100 V; No. of Elements: 1; Transistor Element Material: SILICON;
TIP41C
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 6 A; Terminal Form: THROUGH-HOLE; Package Style (Meter): FLANGE MOUNT;
BD679
Comset Semiconductors
NPN; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): .06 MHz; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 4 A;
BD139
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): 8 W; Maximum Collector Current (IC): 1.5 A;
MC1413DR2G
MC1413DR2G by Onsemi is a NPN BJT transistor for switching applications. It has hFE of 1000, VCE of 50V, and IC of 0.5A. With a max operating temperature of 150°C, it is ideal for surface mount designs in various electronic circuits.
Mospec Semiconductor
NJVMJD31CT4G
NJVMJD31CT4G by Onsemi is a NPN BJT with 100V VCEO, 3A IC, and 15W Ptot. Ideal for automotive applications due to AEC-Q101 compliance and -65 to 150°C operating range. Suitable for surface mount designs with GULL WING terminals in a small outline package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MJD127T4G
MJD127T4G by Onsemi is a PNP BJT with Darlington configuration, ideal for switching applications. It features a max collector-emitter voltage of 100V, collector current of 8A, and power dissipation of 20W. With a transition frequency of 4MHz, it operates b/w -65 to 150°C making it suitable for various power control circuits.
MJD127T4
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 8 A; Maximum VCEsat: 4 V;
MJD127T4 by Onsemi is a PNP BJT transistor with Darlington configuration, ideal for switching applications. It has a max collector-emitter voltage of 100V, max collector current of 8A, and min DC current gain of 100. With a package style of small outline and surface mount capability, it offers high power dissipation up to 20W in a compact rectangular shape.
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 8 A; No. of Terminals: 2;
MJD122T4G
MJD122T4G by Onsemi is a NPN BJT with Darlington configuration, ideal for switching applications. It features a max collector-emitter voltage of 100V, max collector current of 8A, and min DC current gain of 100. With a package style of small outline and surface mount capability, it offers high power dissipation up to 20W in a compact design.
MJD122T4
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 8 A; Package Shape: RECTANGULAR;
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 8 A; Maximum Time At Peak Reflow Temperature (s): 30;
The Onsemi MJD122T4 is a NPN Darlington BJT with built-in diode and resistor, ideal for switching applications. It has a max collector-emitter voltage of 100V, max collector current of 8A, and min DC current gain of 100. With a package style of small outline and peak reflow temp of 235°C, it offers high power dissipation up to 20W in a compact rectangular shape.
MJD112T4G
MJD112T4G by Onsemi is a NPN BJT with Darlington configuration, ideal for switching applications. It has a max collector-emitter voltage of 100V, max collector current of 2A, and min DC current gain of 200. With a package style of small outline and surface mount capability, it operates up to 150°C making it suitable for various power applications.
MJD117T4G
MJD117T4G by Onsemi is a PNP power BJT with 100V VCEO, 2A IC, and 20W max power dissipation. Ideal for switching applications, it features a Darlington configuration with built-in diode and resistor in a small outline package. With a transition frequency of 25MHz and operating temperature up to 150°C, it offers high performance in compact designs.
MJD127G
MJD127G by Onsemi is a PNP power BJT with Darlington configuration, built-in diode and resistor. It has a max collector-emitter voltage of 100V, max collector current of 8A, and min DC current gain of 100. Ideal for switching applications in small outline packages, it operates up to 150°C with a transition frequency of 4MHz.
Changzhou Galaxy Century Microelectronics
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 4 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 8 A;
MJD117T4
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Transistor Element Material: SILICON;
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 25 MHz; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A;
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 25 MHz; Maximum Collector Current (IC): 2 A; Transistor Application: SWITCHING;
PNP; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 25 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 2 A;
MJD112G
MJD112G by Onsemi is a NPN BJT transistor with 100V VCE, 2A IC, and 20W Ptot. Ideal for switching applications, it features a Darlington configuration in a small outline package with Gull Wing terminals. With hFE of 200 and fT of 25MHz, it operates up to 150°C making it suitable for various power control circuits.
MJD112T4
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 2 A; Moisture Sensitivity Level (MSL): 1;
NPN; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 25 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 2 A;
MJD127-TP-HF
Micro Commercial Components
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.5 W; Maximum Collector Current (IC): 8 A; Maximum Power Dissipation Ambient: 1.5 W;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved