Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MJD117T4 by Onsemi is a PNP BJT with Darlington configuration, built-in diode and resistor. It has a max power dissipation of 50W, hFE of 200, and operates up to 150°C. Ideal for switching applications due to its high collector current (2A) and voltage (100V), in a small outline package.
Median Price
$0.804
Lifecycle Status
Suppliers In-Stock
45
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.673
100+ parts
$0.639
1k+ parts
10k+ parts
-
Farnell
$0.430
$0.272
$0.256
Element14
$0.987
$0.604
$0.382
$0.361
Mouser Electronics
$1.180
$0.484
$0.339
$0.243
DigiKey
$0.483
Newark
$1.220
$0.497
$0.349
Arrow
$0.201
Verical
$0.202
Avnet
Chip1Stop
$0.207
EBV Elektronik
Digiode
$0.192
DF Sales Co.
$0.300
Nova Conductors
$0.329
Forefront Electronics and Design
$0.860
TME
$1.090
$0.448
$0.317
IBS Electronics
$0.210
Chip Stock
Vyrian
Bristol Electronics
RLX Solution Inc.
Dan-Mar Components
Atlantic Semiconductor
Cyclops Electronics Ltd
ComSIT USA
Sea View Technologies
NAC Semi
J2 Sourcing AB
Fibra_Brandt Electronic GMBH
Electronics Depot
Inventory MP
ACDS - Activité Composants Distribution Service
Elcom Components
Goldney Electronics S.L.
Inland Empire Components Inc.
ComSIT Distribution GmbH
Zilex Electronics Inc.
ECAB
Pegasus Components GmbH
EMSNET
Anansix
Semi Source
Q Components
Prism Electronics
Semicontronic
$0.134
$0.131
$0.130
Corphita
$0.182
Continental Prestige Electronics
$0.322
Argo Parts USA
$0.319
Netroflash
Aztec Data Supply Inc.
$0.504
IDEA Electronic Components Group
$0.618
$0.556
Advanced Electronics
Corohmni
$0.694
MKK Technologies
$1.163
DigiPath Technology Company
RC Electronics
$0.340
$0.310
Metaverse IC Inc.
Perfect Parts
Kepictronics
A-Z Elektronik GmbH
Authorized Procurement Solutions
Problanco Electronics
Lixinc
Kulean Microsystems
GreenTree Electronics
Glotronic Ltd.
CPlus Electronics
SupplyDigital Components
Futuretech Components
UHIMA Technologies
Parana Technologies
$0.739
TANS Electronics
Assy Fe
Provides durability and protection for the transistor, ensuring reliability in a variety of environments.
Suitable for applications where PNP transistors are required, offering versatility in circuit design.
Convenient integration of diode and resistor simplifies circuit design and saves space on the PCB.
Designed specifically for switching applications, providing efficient and reliable performance in such circuits.
Enables easy and efficient PCB assembly processes, saving time and effort during production.
High power dissipation capability allows the transistor to handle demanding applications without overheating.
High DC current gain ensures amplification of input signals with minimal loss, enhancing overall circuit performance.
Wide operating temperature range makes the transistor suitable for use in various industrial and commercial settings.
Can withstand high voltage levels, making it suitable for applications where high voltage switching is required.
Capable of handling high collector currents, allowing for use in applications that require high current switching.
High transition frequency enables fast switching speeds, ideal for high-frequency applications.
Power Bipolar Junction Transistors (BJT) MJD117T4 attributes and parameters. Explore more Power Bipolar Junction Transistors (BJT) devices from Onsemi
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
MJD117T4 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Mult Devices 27/Feb/2019
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
Rochester Electronics
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Temic Semiconductors
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
1554216004
Molex
WIRE AND CABLE;
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
NJVMJD31CT4G-VF01
NJVMJD31CT4G-VF01 by Onsemi is a NPN BJT transistor with hFE of 10, VCEO of 100V, and IC of 3A. Ideal for amplifier applications, it operates b/w -65 to 150°C and has a transition frequency of 3MHz. Suitable for surface mount designs in automotive electronics per AEC-Q101 standard.
TIP42C
Semiconductors
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 6 A;
TIP125
Plessey Semiconductors Discrete Components Div
PNP; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 8 A; Terminal Position: SINGLE;
BCP56-16
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): 2 W; Maximum Collector Current (IC): 1 A;
TIP127
Baneasa S A
PNP; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 5 A; Minimum DC Current Gain (hFE): 1000; JESD-30 Code: R-PSFM-T3;
MJE3055T
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 2 MHz; Maximum Power Dissipation (Abs): 75 W; Maximum Collector Current (IC): 10 A;
TIP147T
Continental Device India
PNP; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 80 W; Maximum Collector Current (IC): 10 A; Maximum Operating Temperature: 150 Cel;
TIP42CG
Changzhou Galaxy Century Microelectronics
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 2 W; Maximum Collector Current (IC): 6 A;
BD139G
The Onsemi BD139G is a NPN BJT transistor with max. power dissipation of 12.5W, hFE of 25, and max. collector current of 1.5A. Ideal for amplifier applications due to its single configuration and max. collector-emitter voltage of 80V, operating up to 150°C in a rectangular package style with through-hole terminals.
TIP42A
JANTXV2N3055
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 15 A; Terminal Form: PIN/PEG; Qualification: Not Qualified;
2N3055H
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): .8 MHz; Maximum Collector Current (IC): 15 A; Maximum Collector-Emitter Voltage: 60 V;
TIP142
Texas Instruments
TIP142 by Texas Instruments is a NPN power BJT with 125W max power dissipation, 10A max collector current, and 150°C max operating temp. Ideal for high-power applications like motor control and industrial automation due to its Darlington configuration with built-in resistor.
MJD117T4
PNP; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 25 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 2 A;
TIP120
International Devices
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 5 A; Transistor Element Material: SILICON;
TIP36C
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 125 W; Maximum Collector Current (IC): 25 A;
New Jersey Semiconductor Products
PNP; Configuration: SINGLE; Nominal Transition Frequency (fT): 3 MHz; Maximum Collector Current (IC): 6 A; Transistor Element Material: SILICON; Maximum Collector-Emitter Voltage: 100 V;
TIP32C
TIP32C by Texas Instruments is a PNP BJT transistor with 3 terminals, capable of handling up to 40W power dissipation. It operates at a max temperature of 150°C and has a collector-emitter voltage of 100V. Ideal for switching applications due to its high collector current of 3A and transition frequency of 3MHz.
TIP47
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 10 MHz; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 1 A;
BD138
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 75 MHz; Maximum Power Dissipation (Abs): 8 W; Maximum Collector Current (IC): 1.5 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MJD127T4G
MJD127T4G by Onsemi is a PNP BJT with Darlington configuration, ideal for switching applications. It features a max collector-emitter voltage of 100V, collector current of 8A, and power dissipation of 20W. With a transition frequency of 4MHz, it operates b/w -65 to 150°C making it suitable for various power control circuits.
MJD127T4
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 8 A; Maximum VCEsat: 4 V;
MJD127T4 by Onsemi is a PNP BJT transistor with Darlington configuration, ideal for switching applications. It has a max collector-emitter voltage of 100V, max collector current of 8A, and min DC current gain of 100. With a package style of small outline and surface mount capability, it offers high power dissipation up to 20W in a compact rectangular shape.
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 8 A; No. of Terminals: 2;
MJD122T4G
MJD122T4G by Onsemi is a NPN BJT with Darlington configuration, ideal for switching applications. It features a max collector-emitter voltage of 100V, max collector current of 8A, and min DC current gain of 100. With a package style of small outline and surface mount capability, it offers high power dissipation up to 20W in a compact design.
MJD122T4
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 8 A; Package Shape: RECTANGULAR;
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 8 A; Maximum Time At Peak Reflow Temperature (s): 30;
The Onsemi MJD122T4 is a NPN Darlington BJT with built-in diode and resistor, ideal for switching applications. It has a max collector-emitter voltage of 100V, max collector current of 8A, and min DC current gain of 100. With a package style of small outline and peak reflow temp of 235°C, it offers high power dissipation up to 20W in a compact rectangular shape.
MJD112T4G
MJD112T4G by Onsemi is a NPN BJT with Darlington configuration, ideal for switching applications. It has a max collector-emitter voltage of 100V, max collector current of 2A, and min DC current gain of 200. With a package style of small outline and surface mount capability, it operates up to 150°C making it suitable for various power applications.
MJD117T4G
MJD117T4G by Onsemi is a PNP power BJT with 100V VCEO, 2A IC, and 20W max power dissipation. Ideal for switching applications, it features a Darlington configuration with built-in diode and resistor in a small outline package. With a transition frequency of 25MHz and operating temperature up to 150°C, it offers high performance in compact designs.
MJD127G
MJD127G by Onsemi is a PNP power BJT with Darlington configuration, built-in diode and resistor. It has a max collector-emitter voltage of 100V, max collector current of 8A, and min DC current gain of 100. Ideal for switching applications in small outline packages, it operates up to 150°C with a transition frequency of 4MHz.
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 4 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 8 A;
MJD122G
MJD122G by Onsemi is a NPN Power BJT with 100V VCEO, 8A IC, and 20W Ptot. Ideal for switching applications, it features a Darlington configuration with built-in diode and resistor in a small outline package. Suitable for surface mount assembly with a max operating temperature of 150°C.
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Transistor Element Material: SILICON;
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 25 MHz; Maximum Collector Current (IC): 2 A; Transistor Application: SWITCHING;
MJD112G
MJD112G by Onsemi is a NPN BJT transistor with 100V VCE, 2A IC, and 20W Ptot. Ideal for switching applications, it features a Darlington configuration in a small outline package with Gull Wing terminals. With hFE of 200 and fT of 25MHz, it operates up to 150°C making it suitable for various power control circuits.
MJD112T4
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 2 A; Moisture Sensitivity Level (MSL): 1;
NPN; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 25 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 2 A;
MJD117-1
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Nominal Transition Frequency (fT): 25 MHz; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved