Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BF959ZL1 by Onsemi is a NPN BJT transistor for amplifier applications. It has a max power dissipation of 1.5W, fT of 700MHz, and hFE of 35. Suitable for very high frequency band circuits due to its VCE of 20V and IC of 0.1A capabilities.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Pegasus Components GmbH
Digiode
Vyrian
Nova Conductors
AZTECH Wire
$6.667
Ampacity Inc.
$48.050
QUARKTWIN TECHNOLOGY LTD
SupplyDigital Components
TANS Electronics
Problanco Electronics
Corphita
Kulean Microsystems
UHIMA Technologies
Corohmni
Bastille Electronics
Plastic/epoxy material provides durability and protection for the transistor, ensuring a longer lifespan.
NPN transistors are commonly used in amplification circuits, making this transistor suitable for amplifier applications.
Single configuration simplifies circuit design and implementation, making it easier to integrate into electronic systems.
Designed specifically for amplifier applications, ensuring optimal performance in amplification circuits.
High power dissipation capability allows the transistor to handle higher power levels without overheating.
Higher DC current gain ensures better amplification performance and signal integrity in amplifier circuits.
With a maximum voltage rating of 20V, this transistor is suitable for low voltage applications such as amplifiers.
Capable of handling up to 0.1A of current, making it suitable for small signal amplification and transistor switching applications.
High transition frequency allows for faster response times and better high-frequency performance in RF applications.
RF Small Signal Bipolar Junction Transistors (BJT) BF959ZL1 attributes and parameters. Explore more RF Small Signal Bipolar Junction Transistors (BJT) devices from Onsemi
Additional Features:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
Highest Frequency Band:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
BF959ZL1 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
Hy Electronic
1N4148
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
KSC1674Y
KSC1674Y by Onsemi is an NPN BJT transistor with max VCEsat of 0.3V, hFE of 120, and fT of 600MHz. Ideal for amplifier applications in the ultra-high frequency band due to its low power dissipation and high transition frequency. Package: PLASTIC/EPOXY, Shape: ROUND, Terminals: 3.
2N3643
Thomson-csf Semiconductors
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .5 A; Qualification: Not Qualified; Transistor Element Material: SILICON;
BFP843H6327XTSA1
Infineon Technologies
BFP843H6327XTSA1 by Infineon is a NPN RF BJT transistor with 4 terminals, suitable for C band applications. It has a max power dissipation of 0.125W, hFE of 150, and operates up to 150°C. Ideal for amplifier circuits in high-frequency communication systems due to its small outline package and low collector-emitter voltage of 2.25V.
2N5109
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 1200 MHz; Maximum Power Dissipation (Abs): 2.5 W; Maximum Collector Current (IC): .4 A;
CPH6021
CPH6021 by Onsemi is a PNP BJT transistor for amplifier applications. It operates in the ultra-high frequency band with a max fT of 10,000 MHz. With a max IC of 0.1 A and hFE of 60, it has a package style of small outline and can handle up to 0.7 W power dissipation at 150 °C.
2SC2814-5
Onsemi's 2SC2814-5 is an NPN RF BJT transistor with a max fT of 320 MHz. It has a max IC of 0.03 A and hFE of 135, suitable for amplifier applications in the VHF band. The package is a small outline with gull wing terminals, making it ideal for surface mount designs.
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 1200 MHz; Maximum Collector Current (IC): .4 A; Terminal Form: WIRE;
2N2219A
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Style (Meter): CYLINDRICAL; JESD-30 Code: O-MBCY-W3;
BFR96
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 4500 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A;
BFQ256A
NXP Semiconductors
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 1200 MHz; Maximum Power Dissipation (Abs): 2 W; Maximum Collector Current (IC): .3 A;
BF224RL1
BF224RL1 by Onsemi is a NPN RF BJT with max. 30V VCE, 0.05A IC, and 850MHz fT. Ideal for very high frequency band applications due to its single configuration and cylindrical package style. Operates up to 150 °C with through-hole terminals for easy installation.
BF959RL
BF959RL by Onsemi is a NPN RF BJT with max. VCE of 20V and IC of 0.1A. Operating at 150 °C, it has fT of 700MHz making it ideal for very high frequency applications in electronics. The transistor's through-hole package and cylindrical shape enhance its performance in RF circuits.
2N2907
Solid State Devices
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .4 W; Maximum Collector Current (IC): .6 A;
TIS111
TIS111 by Texas Instruments is an NPN BJT transistor with a max collector-emitter voltage of 40V and max current of 0.8A, ideal for switching applications. With a max power dissipation of 0.36W and transition frequency of 350MHz, it operates at up to 150°C making it suitable for various RF small signal tasks.
BFP620FH7764XTSA1
BFP620FH7764XTSA1 by Infineon Technologies is an NPN RF BJT transistor with a max fT of 65 GHz. It features a collector-emitter voltage of 2.3V and a collector current of 0.08A, making it suitable for high-frequency amplifier applications in the C band. This small outline package transistor has 4 terminals and complies with AEC-Q101 standards.
BFP720FH6327XTSA1
BFP720FH6327XTSA1 by Infineon Technologies is a NPN RF BJT transistor with 4 terminals, suitable for X Band applications. It has a max fT of 45 GHz and can handle a collector-emitter voltage of 4V. This small outline package transistor is ideal for amplifier circuits in high-frequency applications.
BFR93A
Siemens
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 6000 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .05 A;
2N4996
2N4996 by Texas Instruments is an NPN RF BJT with a max. collector-emitter voltage of 18V, ideal for amplifier applications in the VHF band. It has a min. DC current gain of 50 and operates at up to 150°C, with a transition frequency of 600MHz for high-frequency performance.
HFA3096BZ96
Renesas Electronics
HFA3096BZ96 by Renesas Electronics is a RF BJT with NPN and PNP channels, 5 elements, and 8000 MHz fT. It's used for amplification in the UHF band, has 16 terminals, and is surface mountable. The package is small outline with gull wing terminals made of silicon material.
934060176115
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25000 MHz; Maximum Collector Current (IC): .03 A; JESD-30 Code: R-PDSO-G4;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BF959
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 700 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A;
BF959G
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 700 MHz; Maximum Power Dissipation (Abs): 1.5 W; Maximum Collector Current (IC): .1 A;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 700 MHz; Maximum Collector Current (IC): .1 A; Terminal Form: THROUGH-HOLE;
BF959RL1
BF959RL1G
BF959RLRA
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 700 MHz; Maximum Collector Current (IC): .1 A; Maximum Collector-Emitter Voltage: 20 V;
BF959RLRE
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 700 MHz; Maximum Collector Current (IC): .1 A; JEDEC-95 Code: TO-92;
BF959RLRM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 700 MHz; Maximum Collector Current (IC): .1 A; Package Style (Meter): CYLINDRICAL;
BF959ZL1G
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 700 MHz; Maximum Collector Current (IC): .1 A; Package Shape: ROUND;
BF959RLRB
BF959RLRF
BF959RLRP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 700 MHz; Maximum Collector Current (IC): .1 A; Maximum VCEsat: 1 V;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 700 MHz; Maximum Collector Current (IC): .1 A; No. of Terminals: 3;
BF959ZL1
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 700 MHz; Maximum Collector Current (IC): .1 A; Transistor Application: AMPLIFIER;
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 1100 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .03 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved