Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Nominal Transition Frequency (fT): 11 MHz; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A;
Median Price
$0.576
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Farnell
1+ parts
$0.991
100+ parts
$0.409
1k+ parts
$0.291
10k+ parts
$0.253
Chip1Stop
$1.310
$0.543
$0.379
$0.294
DigiKey
$1.400
$0.581
$0.411
-
Mouser Electronics
$0.539
Rochester
$0.400
$0.332
$0.296
Verical
$0.415
$0.370
Element14
$0.568
$0.403
$0.351
Master Electronics
$0.556
$0.344
$0.311
Newark
$0.657
$0.499
Arrow
$0.306
RS (Exports)
$0.378
Digiode
Nova Conductors
$0.431
IBS Electronics
$0.779
$0.483
$0.436
Chip Stock
NAC Semi
$0.620
Vyrian
Cyclops Electronics Ltd
Amalfi Trading
Bristol Electronics
Atlantic Semiconductor
ComSIT Distribution GmbH
Flip Electronics
Elcom Components
Ampacity Inc.
$0.226
Semicontronic
$0.220
$0.219
Corohmni
$0.285
Corphita
Argo Parts USA
$0.418
Aztec Data Supply Inc.
$1.017
Perfect Parts
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Continental Prestige Electronics
$0.530
$0.336
$0.271
Problanco Electronics
Kulean Microsystems
Assy Fe
TANS Electronics
Lixinc
Futuretech Components
iodParts Technologies Inc.
SupplyDigital Components
Supply Digital
Authorized Procurement Solutions
Infinite Electronics LLP (Excess)
Formix International (Excess)
UHIMA Technologies
Netroflash
$0.422
$0.401
Power Bipolar Junction Transistors (BJT) KSC5502DTM attributes and parameters. Explore more Power Bipolar Junction Transistors (BJT) devices from Fairchild Semiconductor
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
KSC5502DTM Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.95
SB
8541.29.00.80
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138K-13
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
EU2B-YS3203C
Idec
ROTARY SWITCH;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Silicon Standard
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
EU2B-YS2J03C
TIP35C
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 125 W; Maximum Collector Current (IC): 25 A;
TIP117
Nte Electronics
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; No. of Terminals: 3;
TIP47
Bourns
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 1 A; Qualification: Not Qualified;
TIP127
Changzhou Galaxy Century Microelectronics
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): 5 A; Maximum Operating Temperature: 150 Cel; JESD-30 Code: R-PSFM-T3;
TIP31C
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 30 W; Maximum Collector Current (IC): 3 A;
TIP110
Crimson Semiconductor
NPN; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 2 MHz; Maximum Collector Current (IC): 2 A; Maximum VCEsat: 2.5 V;
TIP120
Texas Instruments
TIP120 by Texas Instruments is a NPN Darlington transistor with max VCEsat of 4V and hFE of 1000. Ideal for switching applications, it has a max IC of 5A and can handle up to 65W power dissipation. With a max operating temp of 150°C, it's commonly used in power control circuits.
BUV48A
Power Innovations
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 10 MHz; Maximum Collector Current (IC): 15 A; Case Connection: COLLECTOR;
Kec
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 40 W; Maximum Collector Current (IC): 3 A;
TIP122
Inchange Semiconductor
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 5 A; Package Style (Meter): FLANGE MOUNT;
TIP142T
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Maximum Collector Current (IC): 10 A; Maximum Collector-Emitter Voltage: 100 V; No. of Elements: 1; Transistor Element Material: SILICON;
TIP36C
Mospec Semiconductor
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 125 W; Maximum Collector Current (IC): 25 A;
JANTX2N3055
Defense Logistics Agency
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 15 A; Terminal Form: PIN/PEG; JESD-30 Code: O-MBFM-P2;
TIP142
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Collector Current (IC): 10 A; Maximum Operating Temperature: 150 Cel;
Baneasa S A
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 5 A; Package Shape: RECTANGULAR; No. of Elements: 1;
TIP3055
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 2.5 MHz; Maximum Power Dissipation (Abs): 100 W; Maximum Collector Current (IC): 15 A;
TIP50
Rectron
NPN; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 10 MHz; Maximum Collector Current (IC): 1 A; Terminal Position: SINGLE;
BD13916S
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 12.5 W; Maximum Collector Current (IC): 1.5 A; Transistor Application: SWITCHING;
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 80 W; Maximum Collector Current (IC): 10 A; Minimum DC Current Gain (hFE): 500;
PNP; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 5 A; Case Connection: COLLECTOR; Terminal Position: SINGLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KSC5502DTM
KSC5502DTM by Onsemi is a NPN BJT transistor with 600V VCEO, 2A IC, and 50W Ptot. Ideal for switching applications, it features a built-in diode and operates up to 150°C. Its small outline package with gull wing terminals makes it suitable for surface mount designs.
KSC5026MOS
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 15 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 1.5 A;
KSC5027OTU
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 15 MHz; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 3 A;
KSC5402DTF
KSC5603DTU
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Nominal Transition Frequency (fT): 11 MHz; Maximum Power Dissipation (Abs): 3 W; Maximum Collector Current (IC): 3 A;
KSC5042MSTU
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 4 W; Maximum Collector Current (IC): .1 A; Package Shape: RECTANGULAR;
KSC5305DF
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 5 A; JESD-30 Code: R-PSFM-T3; Case Connection: ISOLATED;
KSC5305D
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 5 A; JESD-30 Code: R-PSFM-T3; No. of Elements: 1;
KSC5021Y
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 18 MHz; Maximum Collector Current (IC): 5 A; Terminal Form: THROUGH-HOLE;
KSC5305DFTTU
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 75 W; Maximum Collector Current (IC): 5 A; Minimum DC Current Gain (hFE): 8;
KSC5027R
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 15 MHz; Maximum Collector Current (IC): 3 A; Package Body Material: PLASTIC/EPOXY;
KSC5305DTU
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 75 W; Maximum Collector Current (IC): 5 A; Package Shape: RECTANGULAR;
KSC5027O
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 15 MHz; Maximum Collector Current (IC): 3 A; Minimum DC Current Gain (hFE): 20;
KSC5021
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 18 MHz; Maximum Collector Current (IC): 5 A; No. of Elements: 1;
KSC5027
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 15 MHz; Maximum Collector Current (IC): 3 A; Minimum DC Current Gain (hFE): 8;
KSC5502D
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved