Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Median Price
$0.380
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Farnell
1+ parts
$0.365
100+ parts
$0.267
1k+ parts
$0.256
10k+ parts
$0.246
Arrow
$0.374
$0.247
-
Rochester
$0.370
$0.360
Element14
$0.622
$0.452
$0.450
$0.448
Newark
$0.628
$0.358
Mouser Electronics
$0.690
$0.347
DigiKey
$0.750
$0.432
$0.375
$0.338
Adafruit Industries
$3.848
$3.656
Verical
$0.248
EBV Elektronik
Future Electronics
$0.174
$0.168
Avnet
Chip1Stop
$0.305
$0.299
$0.298
Flip Electronics
$0.300
EXC GmbH
$0.316
Digiode
$0.361
TME
$0.650
$0.329
Nova Conductors
$1.000
Chip Stock
IBS Electronics
$0.209
$0.191
Vyrian
Schukat
$0.489
$0.466
NAC Semi
$0.326
PC Components Company LLC
ACDS - Activité Composants Distribution Service
Bristol Electronics
LIBRA Elektronik GmbH
Holdelec - ElecDif-Pro
Cogito LLC
EMSNET
Semicontronic
$0.122
$0.119
$0.118
Corohmni
$0.206
Ampacity Inc.
$0.266
Argo Parts USA
$0.339
$0.328
Corphita
$0.342
Modulus Dynamics
$0.377
$0.362
Continental Prestige Electronics
$0.595
$0.279
$0.225
Advanced Electronics
Microchip USA
$5.980
Aztec Data Supply Inc.
$8.904
Lixinc
Perfect Parts
Problanco Electronics
TANS Electronics
SupplyDigital Components
Kepictronics
Kulean Microsystems
UHIMA Technologies
GreenTree Electronics
Robosynatics
$8.762
Lucentia Tech
iodParts Technologies Inc.
Authorized Procurement Solutions
Eastek
Component Stockers USA
This material ensures durability and makes the product lightweight.
Low dropout voltage helps to maintain a stable output voltage even when the input voltage decreases slightly.
Allows for easy and secure installation on a PCB.
Wide operating temperature range makes this regulator suitable for various environments.
Bipolar technology ensures high accuracy and stability in regulating the output voltage.
Rectangular shape allows for efficient use of space on a PCB.
Gull wing terminals provide a strong connection to the PCB.
Rail packaging simplifies handling and storage of the regulators.
Provides a stable minimum output voltage for different applications.
Ensures precise output voltage regulation for reliable performance.
Standard output voltage suitable for a wide range of applications.
Simple two-terminal design for easy integration into circuitry.
Compact size with heat sink/slug for efficient heat dissipation.
Fixed output voltage eliminates the need for additional adjustments.
Ensures stable operation even at high temperatures.
Optimal terminal pitch for easy PCB layout.
Provides precise regulation of output voltage against variations in the input line voltage.
Allows for operation in low-temperature environments.
Specifically designed for applications requiring a fixed positive voltage output.
Matte tin finish provides corrosion resistance and enhances solderability.
Single terminal position for simplified installation.
Ensures stable output voltage within the specified range.
Low profile design for space-constrained applications.
Compact width for efficient PCB layout.
Provides precise regulation of output voltage against variations in the load current.
Ensures the regulator operates within the specified input voltage range.
Supports a maximum output current of 0.1 A for various applications.
Ensures the regulator can withstand peak reflow temperatures for soldering.
Peak reflow temperature tolerance for reliable soldering during assembly.
Low dropout voltage helps maintain a stable output voltage even at low input voltages.
Compact length for space-efficient PCB design.
Supports a wide range of input voltages for versatile applications.
Ensures the regulator can handle transient voltage spikes up to 30 V.
Fixed Regulators - Positive Single Output LDO LP2950CDT-3.3G attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LP2950CDT-3.3G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
LL4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
Semtech Electronics
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
Lite-on Semiconductor
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
ADM7150ACPZ-5.0-R7
ADM7150ACPZ-5.0-R7 by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.8A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. Its small outline package with very thin profile and surface mount capability enhances versatility in electronic designs.
LM2936M-5.0/NOPB
Texas Instruments
LM2936M-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 0.05 A and a dropout voltage of 0.4 V. It is commonly used in applications requiring stable voltage regulation, such as power supplies for electronic devices.
LM1085IS-12/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 18 V; Maximum Voltage Tolerance: 2 %;
NCV2931AZ-5.0G
NCV2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.1 A and a dropout voltage of 0.6 V. It is commonly used in automotive applications due to its AEC-Q100 screening level and wide operating temperature range (-40°C to 125°C).
LM3480IM3-12
LM3480IM3-12 by Texas Instruments is a 12V fixed positive single output LDO regulator with a max dropout voltage of 1.2V and max output current of 0.1A. It is ideal for applications requiring stable voltage regulation in compact spaces, such as portable electronic devices or IoT sensors.
TPS70933DRVRM3
TPS70933DRVRM3 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It has a small outline package style, suitable for applications requiring precise voltage regulation in tight spaces. With an operating temperature range from -40°C to 125°C, it offers stable performance across various environments.
SPX5205M5-L-3-3/TR
Exar
Exar's SPX5205M5-L-3-3/TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.15A max output current. It features a small outline, low profile package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LT1086CM-3.3#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
TPS71733DCKR
TPS71733DCKR by Texas Instruments is a fixed positive single output LDO regulator with a max dropout voltage of 0.3V and an operating temperature range of -40°C to 125°C. It is commonly used in applications that require a stable and regulated power supply, such as consumer electronics and industrial equipment.
LT3010EMS8E-5#TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 80 V; Maximum Voltage Tolerance: 3 %;
LP2992AILD-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 4.5 %;
PTPS7A2533DRVR
The Texas Instruments PTPS7A2533DRVR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It has a small outline package style, suitable for surface mount applications, and operates within an extended temperature range from -40°C to 125°C. Ideal for compact electronic devices requiring stable power supply with minimal dropout voltage.
MIC5219-3.3YML-TR
MIC5219-3.3YML-TR by Microchip: Fixed Positive Single Output LDO Regulator with 3.3V output, 0.5A max current, and 2% voltage tolerance. Ideal for applications requiring low dropout voltage and operating temperatures from -40 to 125°C in a small outline package.
LM1117SX-3.3/NOPB
LM1117SX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It has a small outline package style, operates b/w 0-125°C, and offers low dropout voltage at 1.2V for efficient power regulation in various electronic applications.
MIC5233-3.3YM5-TR
MIC5233-3.3YM5-TR by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.1A max output current, and 2% max voltage tolerance. It is ideal for applications requiring low dropout voltage and operates in temperatures ranging from -40 to 125°C.
LM2931Z-5.0/NOPB
LM2931Z-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a package style of cylindrical, operates b/w -40 to 125°C, and is suitable for applications requiring stable voltage regulation in electronic circuits.
NCV551SN50T1G
Onsemi's NCV551SN50T1G is a CMOS LDO regulator with 5V output, 0.15A current, and 3% voltage tolerance. Ideal for automotive applications due to AEC-Q100 screening, it operates b/w -40°C to 150°C with small form factor and low dropout voltage of 0.15V.
LT1763CS8-5#PBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.5 %;
LP2951ACD-3.3R2G
LP2951ACD-3.3R2G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It features a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125 °C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LM2931M-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 10 %;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LP2950CDT-3.3RKG
LP2950CDT-3.3RKG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It features a small outline package style, operates b/w -40 to 125°C, and has a dropout voltage of 0.35V making it suitable for various applications requiring stable voltage regulation in compact designs.
LP2950CDT-5.0RKG
LP2950CDT-5.0RKG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a small outline package style, operates b/w -40 to 125 °C, and is suitable for applications requiring precise voltage regulation in compact spaces.
LP2985AIM5-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.5 %;
LP2985AIM5-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.15A max output current. It has a small outline, low profile package style and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LP2980IM5-3.0/NOPB
LP2980IM5-3.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 3V nominal output voltage, 0.05A max output current, and 125°C max operating temperature. Ideal for applications requiring low dropout voltage and precise voltage regulation in compact designs.
LP2951-33DRGR
LP2951-33DRGR by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.1A max output current. It operates b/w -40 to 125°C, has a dropout voltage of 0.38V, and is suitable for applications requiring stable voltage regulation in compact spaces.
LP2985-33DBVRG4
LP2985-33DBVRG4 by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.15A max output current. It has a small outline package style, operates in temperatures ranging from -40 to 125°C, and is suitable for applications requiring low dropout voltage and precise voltage regulation.
LP2985-33DBVR
LP2985-33DBVR by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.15A max output current. It has a small outline, low profile package style suitable for surface mount applications. With a wide operating temperature range from -40 to 125°C, it offers stable performance in various environments.
LP2985-33DBVRE4
LP2985-33DBVRE4 by Texas Instruments is a fixed positive single output LDO regulator with an output voltage of 3.3 V and max current of 0.15 A. It has a small outline package style, making it suitable for applications requiring low dropout voltage and precise voltage regulation in compact spaces. With a wide operating temperature range from -40 to 125°C, it is ideal for various electronic devices where stable power supply is crucial.
LP2951-50DRGR
LP2951-50DRGR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.6V, suitable for applications requiring stable voltage regulation. With a max output current of 0.1A and compact package style, it is ideal for space-constrained designs in various electronic devices. Operating efficiently within a wide temperature range from -40°C to 125°C, this regulator ensures reliable performance in diverse environments.
LP2951CD-3.3R2G
LP2951CD-3.3R2G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates b/w -40 to 125 °C, and offers low dropout voltage at 0.35V for efficient power management in various electronic applications.
LP2950CDT-5.0G
LP2950CDT-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a small outline package style, operates b/w -40 to 125°C, and is suitable for applications requiring low dropout voltage and precise regulation in electronic circuits.
LP2985AIM5-5.0/NOPB
LP2985AIM5-5.0/NOPB by Texas Instruments is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.15A Max Output Current, and 3.5% Max Voltage Tolerance. It is used in applications requiring stable voltage regulation in a compact form factor such as portable electronics and IoT devices.
LP2951-50DRG4
LP2951-50DRG4 by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.1A max output current. It has a small outline package style, operates b/w -40 to 125°C, and offers low dropout voltage of 0.38V for efficient power management in various electronic applications.
LP2980IM5-2.5/NOPB
LP2980IM5-2.5/NOPB by Texas Instruments is a Fixed Positive Single Output LDO Regulator with 2.5V Nominal Output Voltage, 0.05A Max Output Current, and 125°C Max Operating Temperature. Ideal for applications requiring stable voltage regulation in compact electronic devices.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved