Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KSC5305DF by Onsemi is a NPN BJT transistor with 400V VCE, 5A IC, and hFE of 8. Ideal for switching applications, it comes in a plastic/epoxy package with single configuration and built-in diode. Operating up to 150 °C, it has through-hole terminals in a rectangular flange mount style.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
Corphita
Supply Digital
UHIMA Technologies
Corohmni
Provides durability and protection for the transistor, making it suitable for various applications.
NPN transistors are commonly used for amplification and switching applications, offering versatile functionality.
The built-in diode allows for efficient operation in circuits where reverse current flow protection is needed.
Designed specifically for switching applications, ensuring reliable performance in such scenarios.
Rectangular shape facilitates easy mounting and integration into electronic circuits.
Through-hole terminals provide a secure connection and easy soldering onto a PCB.
Simple 3-terminal setup makes it easy to use and integrate into circuits.
Flange mount design allows for easy and secure installation in electronic devices.
A higher minimum current gain ensures consistent and reliable amplification performance.
Can operate at high temperatures, suitable for applications that require heat resistance.
With a high voltage rating, it can be used in circuits that require high voltage handling capabilities.
Silicon transistors offer high performance and reliability, making them a popular choice in electronics.
Capable of handling high collector currents, suitable for power applications.
Single terminal position simplifies circuit design and installation.
Isolated case connection helps prevent short circuits and improves safety in circuits.
Power Bipolar Junction Transistors (BJT) KSC5305DF attributes and parameters. Explore more Power Bipolar Junction Transistors (BJT) devices from Onsemi
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JEDEC-95 Code:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
KSC5305DF Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138-TP
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Lite-on Semiconductor
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
TIP31C
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 30 W; Maximum Collector Current (IC): 3 A;
NJVMJD44H11T4G-VF01
NJVMJD44H11T4G-VF01 by Onsemi is a NPN BJT transistor with hFE of 40, VCE of 80V, and IC of 8A. Ideal for switching applications, it operates b/w -65 to 150°C. This small outline package with Gull Wing terminals is surface mountable and AEC-Q101 compliant.
MJE350
Motorola
PNP; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Transistor Element Material: SILICON; JESD-609 Code: e0;
TIP32C
Rectron
PNP; Configuration: DARLINGTON; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Collector Current (IC): 3 A; Terminal Position: SINGLE;
2N3055
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): .8 MHz; Maximum Power Dissipation (Abs): 115 W; Maximum Collector Current (IC): 15 A;
TIP41CTU
TIP41CTU by Onsemi is a NPN power BJT with 100V VCEO, 6A IC, and 65W Ptot. Ideal for switching applications, it has hFE of 15 and fT of 3MHz. The transistor comes in a plastic/epoxy package with through-hole terminals for easy mounting.
TIP115G
TIP115G by Onsemi is a PNP power BJT with 50W max power dissipation, hFE of 500, and 60V max collector-emitter voltage. Ideal for amplifier applications due to its Darlington configuration with built-in diode and resistor. Package style is flange mount with through-hole terminals.
TIP127
Bourns
PNP; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 65 W; Maximum Collector Current (IC): 5 A; Terminal Form: THROUGH-HOLE;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 15 A; No. of Elements: 1; Terminal Form: PIN/PEG;
ULN2803AN
Texas Instruments
ULN2803AN by Texas Instruments is an 8-bank Darlington transistor array with built-in diode and resistor, ideal for switching applications. It has a max collector-emitter voltage of 50V, collector current of 0.5A, and operates up to 150°C. The package style is in-line with through-hole terminals for easy installation.
MJ11015G
MJ11015G by Onsemi is a PNP power BJT with 200W power dissipation, 120V max collector-emitter voltage, and 30A max collector current. Ideal for amplifier applications, it features a Darlington configuration with built-in diode and resistor in a round package with flange mount style.
TIP142T
Mospec Semiconductor
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 80 W; Maximum Collector Current (IC): 10 A; Minimum DC Current Gain (hFE): 500;
BD139-16
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): 13 W; Maximum Collector Current (IC): 1.5 A;
MJD117T4
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 25 MHz; Maximum Collector Current (IC): 2 A; Transistor Application: SWITCHING;
JANS2N2905A
Vpt Components
PNP; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 3 W; Maximum Collector Current (IC): .6 A; Qualification: Qualified;
BD139
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 12.5 W; Maximum Collector Current (IC): 1.5 A; No. of Terminals: 3;
BCP56-16T3G
BCP56-16T3G by Onsemi is a NPN Power BJT with 80V VCEO, 1A IC, and 130MHz fT. Ideal for amplifier applications, it comes in a small outline package with Gull Wing terminals. Operating b/w -55 to 150°C, it offers high DC current gain and can handle up to 1.5W power dissipation.
SBCP56T1G
SBCP56T1G by Onsemi is a NPN BJT transistor with 80V VCEO, 1A IC, and 130MHz fT. Ideal for amplifier applications, it comes in a small outline package with Gull Wing terminals for surface mounting. With a max power dissipation of 1.5W and hFE of 40, it operates up to 150°C making it suitable for various electronic designs.
TIP112
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; JESD-30 Code: R-PSFM-T3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KSC5502DTM
KSC5502DTM by Onsemi is a NPN BJT transistor with 600V VCEO, 2A IC, and 50W Ptot. Ideal for switching applications, it features a built-in diode and operates up to 150°C. Its small outline package with gull wing terminals makes it suitable for surface mount designs.
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Nominal Transition Frequency (fT): 11 MHz; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A;
KSC5026MOS
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 15 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 1.5 A;
KSC5027OTU
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 15 MHz; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 3 A;
KSC5402DTF
KSC5603DTU
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Nominal Transition Frequency (fT): 11 MHz; Maximum Power Dissipation (Abs): 3 W; Maximum Collector Current (IC): 3 A;
KSC5042MSTU
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 4 W; Maximum Collector Current (IC): .1 A; Package Shape: RECTANGULAR;
KSC5305D
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Collector Current (IC): 5 A; JESD-30 Code: R-PSFM-T3; No. of Elements: 1;
KSC5021Y
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 18 MHz; Maximum Collector Current (IC): 5 A; Terminal Form: THROUGH-HOLE;
KSC5305DFTTU
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 75 W; Maximum Collector Current (IC): 5 A; Minimum DC Current Gain (hFE): 8;
KSC5027R
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 15 MHz; Maximum Collector Current (IC): 3 A; Package Body Material: PLASTIC/EPOXY;
KSC5305DTU
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 75 W; Maximum Collector Current (IC): 5 A; Package Shape: RECTANGULAR;
KSC5027O
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 15 MHz; Maximum Collector Current (IC): 3 A; Minimum DC Current Gain (hFE): 20;
KSC5021
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 18 MHz; Maximum Collector Current (IC): 5 A; No. of Elements: 1;
KSC5027
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 15 MHz; Maximum Collector Current (IC): 3 A; Minimum DC Current Gain (hFE): 8;
NPN; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 75 W; Maximum Collector Current (IC): 5 A; No. of Elements: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved