Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
EMD5DXV6T1G
Onsemi
EMD5DXV6T1G by Onsemi is a dual NPN and PNP BJT with 2 elements, 0.5W power dissipation, hFE of 20, and 0.1A collector current. It is made of silicon for surface mount applications with TIN finish. Ideal for low-power amplification in electronic circuits.
.1 A
20
e3
1
2
260
NPN AND PNP
.5 W
BIP General Purpose Small Signal
YES
TIN
SILICON
RN4609(TE85L,F)
Toshiba
NPN AND PNP; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .1 A; Transistor Element Material: SILICON; Minimum DC Current Gain (hFE): 70;
70
.3 W
RN4611(TE85L,F)
NPN AND PNP; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .1 A; No. of Elements: 2; Minimum DC Current Gain (hFE): 120;
120
RN46A1(TE85L,F)
NPN AND PNP; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .1 A; Transistor Element Material: SILICON; Minimum DC Current Gain (hFE): 50;
50
RN4989(TE85L,F)
NPN AND PNP; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .1 A; Transistor Element Material: SILICON; No. of Elements: 2;
.2 W
RN4988(TE85L,F)
80
RN4990(TE85L,F)
NPN AND PNP; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .1 A; No. of Elements: 2; Transistor Element Material: SILICON;
RN49A1FE(TE85L,F)
NPN AND PNP; Surface Mount: YES; Maximum Power Dissipation (Abs): .1 W; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 80; No. of Elements: 2;
.1 W
RN49A1(TE85L,F)
NPN AND PNP; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .1 A; No. of Elements: 2; Minimum DC Current Gain (hFE): 80;
RN4602(TE85L,F)
NPN AND PNP; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 50; Transistor Element Material: SILICON;
BIP General Purpose Small Signals
RN4610(TE85L,F)
NPN AND PNP; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 120; No. of Elements: 2;
HN1B04F(TE85L,F)
NPN AND PNP; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 150 Cel; Minimum DC Current Gain (hFE): 70;
.5 A
150 Cel
MCH6542-TL-E
MCH6542-TL-E by Onsemi is a Small Signal BJT available in NPN and PNP types. With a max power dissipation of 0.55W, min hFE of 300, and max IC of 0.3A, it operates up to 150 °C. Ideal for surface mount applications with Tin/Bismuth finish, this transistor suits various electronic designs.
.3 A
300
e6
.55 W
Tin/Bismuth (Sn/Bi)
DCX114EUQ-13-F
Diodes Incorporated
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .1 A;
BUILT IN BIAS RESISTANCE RATIO IS 1
50 V
SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR
100
R-PDSO-G6
6
-55 Cel
PLASTIC/EPOXY
RECTANGULAR
SMALL OUTLINE
AEC-Q101; IATF 16949; MIL-STD-202
MATTE TIN
GULL WING
DUAL
30
250 MHz
.3 V
DCX114YUQ-13-F
BUILT IN BIAS RESISTANCE RATIO IS 4.7
DCX114YUQ-13R-F
DCX124EUQ-13-F
DCX124EUQ-13R-F
SMUN5315DW1T1G
SMUN5315DW1T1G by Onsemi is a dual NPN and PNP BJT with 2 elements. Features include max power dissipation of 0.256W, min DC current gain of 160, and max collector current of 0.1A. Ideal for surface mount applications in electronics requiring high performance transistors.
160
.256 W
NSVUMC5NT2G
NPN AND PNP; Configuration: COMPLEX; Surface Mount: YES; Maximum Power Dissipation (Abs): .15 W; Maximum Collector Current (IC): .1 A; No. of Elements: 2;
BUILT-IN BIAS RESISTOR RATIO IS 1
COMPLEX
R-PDSO-G5
5
-65 Cel
.15 W
AEC-Q101
.25 V
NSVB143TPDXV6T1G
NSVB143TPDXV6T1G by Onsemi is a Small Signal BJT with NPN and PNP types, ideal for switching applications. It features 2 elements with built-in resistor, hFE of 160, VCE of 50V, and IC of 0.1A. This transistor comes in a small outline package suitable for surface mount technology.
BUILT IN BIAS RESISTOR
R-PDSO-F6
FLAT
SWITCHING
NSVB144EPDXV6T1G
NSVB144EPDXV6T1G by Onsemi is a Small Signal BJT with NPN and PNP channels, ideal for surface mount applications. Featuring 2 elements, it offers max power dissipation of 0.5W, min hFE of 80, and max IC of 0.1A. Commonly used in low-power electronic circuits due to its silicon transistor element material.
ZXTC6717MCQTA
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 120 MHz; Maximum Collector Current (IC): 4.5 A; Terminal Form: NO LEAD;
HIGH RELIABILITY
COLLECTOR
4.5 A
15 V
SEPARATE, 2 ELEMENTS
150
R-PDSO-N8
e4
8
NICKEL PALLADIUM GOLD
NO LEAD
120 MHz
ZXTC6718MCQTA
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 140 MHz; Maximum Collector Current (IC): 4.5 A; No. of Elements: 2;
20 V
Nickel/Palladium/Gold (Ni/Pd/Au)
140 MHz
ZXTC2045E6QTA
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: YES; Nominal Transition Frequency (fT): 265 MHz; Maximum Collector Current (IC): 1.5 A; No. of Elements: 2;
1.5 A
30 V
180
265 MHz
SMBTA06UPNE6327HTSA1
Infineon Technologies
SMBTA06UPNE6327HTSA1 by Infineon Technologies is a Small Signal BJT with NPN and PNP configuration, 2 elements, and Gull Wing terminals. It operates up to 150°C with a max voltage of 80V and max current of 0.5A. Ideal for applications requiring high DC gain (hFE), such as amplification in small outline packages.
80 V
Not Qualified
100 MHz
CPH5518-TL-E
CPH5518-TL-E by Onsemi is a Small Signal BJT with NPN and PNP channels, ideal for surface mount applications. It boasts a max power dissipation of 1.2W, min hFE of 200, and max IC of 1A. With an operating temp up to 150°C, it's suitable for various electronic circuits requiring high current amplification.
1 A
200
1.2 W
TIN BISMUTH
BCR48PNH6327XTSA1
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .07 A; Transistor Application: SWITCHING;
BUILT-IN BIAS RESISTOR RATIO 1
.07 A
SMBT3904PNH6327XTSA1
SMBT3904PNH6327XTSA1 by Infineon Technologies is a Small Signal BJT with NPN and PNP channels, ideal for switching applications. It features a max collector-emitter voltage of 40V, hFE of 30, and fT of 250MHz. With a package style of small outline and Gull Wing terminals, it's suitable for surface mount designs in various electronic circuits.
.2 A
40 V
300 ns
70 ns
IMD3AT108
ROHM
ROHM's IMD3AT108 is a Small Signal BJT with NPN and PNP types. It features 2 elements with built-in resistor for switching applications. With max VCEsat of 0.3V, it operates up to 150°C, has fT of 250MHz, and can handle IC of 0.05A in a small outline package suitable for surface mount technology.
DIGITAL, BUILT-IN BIAS RESISTOR RATIO IS 1
.05 A
e1
TIN SILVER COPPER
10
IMZ4T108
ROHM's IMZ4T108 is a Small Signal BJT with NPN and PNP types, 2 separate elements, and Gull Wing terminals. It has a max power dissipation of 0.3W, hFE of 120, and can handle up to 32V collector-emitter voltage. Ideal for applications requiring high transition frequency (fT) of 250MHz in small outline packages.
32 V
NSVB114YPDXV6T1G
NSVB114YPDXV6T1G by Onsemi is a Small Signal BJT with NPN and PNP polarity, ideal for switching applications. It features 2 elements with built-in resistor, max VCE of 50V, and hFE of 80. This surface-mount transistor has a package style of small outline and complies with AEC-Q101 standards.
BUILT-IN BIAS RESISTOR RATIO 4.7
UMC4NTR
ROHM UMC4NTR is a Small Signal BJT with NPN and PNP polarity, ideal for switching applications. Features include VCEsat of 0.3V, hFE of 68, and fT of 250MHz. With a max operating temperature of 150°C, it has a collector-emitter voltage of 50V and collector current of 0.03A.
BUILT IN BIAS RESISTOR RATIO 1
.03 A
CASCADED, 2 ELEMENTS WITH BUILT-IN RESISTOR
68
e2
TIN COPPER
EMD9FHAT2R
ROHM EMD9FHAT2R is a Small Signal BJT with NPN and PNP types. It has 2 elements with built-in resistor for switching applications. Features include hFE of 68, VCE of 50V, IC of 0.1A, fT of 250MHz. Suitable for surface mount in automotive electronics due to AEC-Q101 compliance.
UMD22NFHATR
ROHM UMD22NFHATR is a Small Signal BJT with NPN and PNP polarity, 2 elements with built-in resistor. It's ideal for switching applications, featuring 80 min hFE, 50V VCEO, and 250MHz fT. Package: SOT-363, surface mount Gull Wing terminals.
BUILT IN BIAS RESISTANCE RATIO IS 10
NSBC143TPDXV6T5G
NSBC143TPDXV6T5G by Onsemi is a Small Signal BJT with NPN and PNP types, 2 elements with built-in resistor for switching applications. Features include max. collector-emitter voltage of 50V, min. DC current gain of 160 (hFE), and max. power dissipation of 0.5W in a small outline package suitable for surface mount technology.
EMF5XV6T5G
The Onsemi EMF5XV6T5G is a Small Signal BJT with NPN and PNP polarity, 2 elements with built-in resistor. It has a max collector-emitter voltage of 50V, 0.1A max collector current, and 0.5W power dissipation. Ideal for applications requiring compact design and high DC current gain (hFE) in electronic circuits.
Other Transistors
NSBC114EPDXV6T5G
NSBC114EPDXV6T5G by Onsemi is a Small Signal BJT with NPN and PNP types, ideal for switching applications. It features 2 elements with built-in resistor, max power dissipation of 0.5W, and can operate at up to 150 °C. Suitable for surface mount designs in various electronic circuits.
BUILT IN BIAS RESISTOR RATIO IS 1
35
NSBC114YPDXV6T5G
NSBC114YPDXV6T5G by Onsemi is a Small Signal BJT with NPN and PNP channels, 2 elements with built-in resistor. It has a max power dissipation of 0.5W, hFE of 80, and can handle up to 50V collector-emitter voltage. Ideal for switching applications in surface mount designs due to its compact rectangular package style.
BUILT IN BIAS RESISTOR RATIO IS 4.7
NSBC124EPDXV6T5G
NSBC124EPDXV6T5G by Onsemi is a Small Signal BJT with NPN and PNP types, ideal for switching applications. It features 2 elements with built-in resistors, max power dissipation of 0.5W, and can operate b/w -55 to 150 °C. Suitable for surface mount designs in various electronic circuits.
60
NSBC144EPDXV6T5G
NSBC144EPDXV6T5G by Onsemi is a Small Signal BJT with NPN and PNP channels, ideal for switching applications. It features 2 elements with built-in resistors, a max power dissipation of 0.5W, and can operate at temperatures up to 150 °C. This transistor has a collector-emitter voltage of 50V and a collector current of 0.1A, making it suitable for various electronic circuits requiring low-power amplification or switching functions in compact designs.
HBDM60V600W-7
Diodes Inc.'s HBDM60V600W-7 is a Small Signal BJT with NPN and PNP types. It has 2 elements, 6 terminals, and can handle up to 0.5A collector current at 65V. With a transition frequency of 100MHz, it's ideal for high-frequency applications in electronics requiring small outline packages.
65 V
MMDT3946LP4-7
NPN AND PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .2 W; Maximum Collector Current (IC): .2 A;
SINGLE
R-PDSO-N6
300 MHz
250 ns
DMB2227A-7
DMB2227A-7 by Diodes Inc. is a Small Signal BJT with NPN and PNP channels, ideal for switching applications. It features 2 separate elements in a rectangular package with Gull Wing terminals. With a max operating temp of 150°C, it offers a transition frequency of 300 MHz and can handle up to 0.6A collector current.
.6 A
40
285 ns
35 ns
EMF21-7
NPN AND PNP; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .1 A;
DCX115EK-7-F
DCX115EK-7-F by Diodes Inc. is a Small Signal BJT with NPN/PNP polarity, 2 elements, and built-in resistor. It has 6 terminals, max power dissipation of 0.3W, and operates up to 150°C. Ideal for applications requiring high transition frequency at 250MHz in a compact small outline package.
82
BC846BPN-TP
Micro Commercial Components
BC846BPN-TP by Micro Commercial Components is a Small Signal BJT with NPN and PNP configuration. It has hFE of 200, VCE of 65V, and fT of 100MHz. Ideal for applications requiring small outline packages, such as amplifiers and signal processing circuits.
Matte Tin (Sn)
NSBC143EPDP6T5G
NSBC143EPDP6T5G by Onsemi is a Small Signal BJT with NPN and PNP types, 2 elements with built-in resistor. It has a max power dissipation of 0.408W, hFE of 15, and can handle up to 50V collector-emitter voltage. Ideal for switching applications in surface mount designs due to its compact rectangular package style.
BUILT IN BIAS RESISTOR RATIO 1.0
15
.408 W
© 2023 All rights reserved
