Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
MC74LVXT8051MEL
Onsemi
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SINGLE-ENDED MULTIPLEXER
R-PDSO-G16
e4
10.2 mm
3
8
1
16
37 dB
25 ohm
50 ohm
125 Cel
-55 Cel
PLASTIC/EPOXY
SOP
SOP16,.3
RECTANGULAR
SMALL OUTLINE
260
2/6
Not Qualified
2.05 mm
.02 A
Multiplexer or Switches
.16 mA
6 V
2 V
3 V
YES
30 ns
15 ns
CMOS
MILITARY
NICKEL PALLADIUM GOLD
GULL WING
1.27 mm
DUAL
5.275 mm
MC74LVXT8051MG
MC74LVXT8051MG by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 2-6V and offers a max on-state resistance of 50 ohm. With a compact small outline package, it is ideal for military-grade applications requiring fast switching times and low power consumption.
0 V
COMMON OUTPUT
3.3 V
MC74LVXT8051M
MC74LVXT8051M by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 2-6V and offers a max on-state resistance of 50 ohm. With a compact small outline package, it is ideal for military-grade applications requiring fast switching times and low power consumption.
MC74LVXT8053MELG
MC74LVXT8053MELG by Onsemi is a 3-function CMOS multiplexer with 2/6V supplies, 16 terminals, and 50 ohm Ron. Ideal for military-grade applications, it offers fast switching times of 15ns on and 30ns off, with a small outline package and high isolation at 37dB.
2
MC74LVXT8053MEL
MC74LVXT8053MEL by Onsemi is a 3-function CMOS multiplexer with 2/6V supplies, 16 terminals, and 50 ohm Ron. Ideal for military-grade applications, it offers fast switching times of 15ns on and 30ns off, with a small outline package and nickel palladium gold finish.
MC74LVXT8053M
MC74LVXT8053M by Onsemi is a CMOS multiplexer with 3 functions, 2 channels, and 16 terminals. It operates b/w -55 to 125 °C and has a max supply voltage of 6 V. Ideal for military-grade applications requiring low on-state resistance and fast switching times.
NB6L72MMNG
NB6L72MMNG by Onsemi is a 16-terminal chip carrier with a nominal voltage of 2.5V and max operating temperature of 85°C. It is a cross point switch with 2 channels, suitable for industrial applications requiring fast switching times of 0.48ns in a compact square package shape.
ALSO OPERATES WITH 0V -3.63V SUPPLY
CROSS POINT SWITCH
S-XQCC-N16
3 mm
85 Cel
-40 Cel
UNSPECIFIED
HVQCCN
LCC16,.12SQ,20
SQUARE
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
2.5/3.3
1 mm
3.63 V
2.375 V
2.5 V
.48 ns
INDUSTRIAL
NICKEL GOLD PALLADIUM
NO LEAD
.5 mm
QUAD
30
NB6L72MNG
NB6L72MNG by Onsemi is a 16-terminal chip carrier with a nominal voltage of 2.5V and power supplies of 2.5/3.3V, suitable for industrial applications. It features a max operating temperature of 85°C, peak reflow temperature of 260°C, and fast switch-on/off times of 0.16ns, making it ideal for high-speed cross point switching in compact electronic devices.
NECL MODE: 0V GND WITH VEE = -2.375V TO -3.63V; IT ALSO WORKS ON 3.3 V SUPPLY
.16 ns
NLAS7222AMTR2G
NLAS7222AMTR2G by Onsemi is a CMOS DPDT switch with 10 terminals, operating at -40 to 85 °C. It has a max on-state resistance of 9 ohm and nominal off-state isolation of 28 dB. Ideal for industrial applications requiring separate outputs and fast switching times.
DPDT
R-XQCC-N10
1.8 mm
10
28 dB
.35 ohm
9 ohm
SEPARATE OUTPUT
VQCCN
LCC10,.06X.07,16
CHIP CARRIER, VERY THIN PROFILE
3.3
.8 mm
3.6 V
25 ns
BREAK-BEFORE-MAKE
.4 mm
1.4 mm
NLAS7222AMUR2G
NLAS7222AMUR2G by Onsemi is a CMOS DPDT switch with 10 terminals, operating at -40 to 85°C. It has a nominal voltage of 3.3V and max on-state resistance of 9 ohm. Ideal for industrial applications requiring separate outputs and break-before-make switching within a compact chip carrier package.
.6 mm
MC74LVX8051DTR2G
MC74LVX8051DTR2G by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 2.5V to 6V, offering low on-state resistance of 50 ohm and fast switch-on time of 15ns. Ideal for military-grade applications requiring high-speed signal switching in compact designs.
5 mm
TSSOP
TSSOP16,.25
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
2.5/6
1.2 mm
.65 mm
4.4 mm
MC74LVX4051DTG
MC74LVX4051DTG by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 6V. With a nominal off-state isolation of 70 dB, it is ideal for military-grade applications requiring low on-state resistance and high signal current capabilities.
ALSO OPERATES WITH 2.5V TO 6V SINGLE SUPPLY
-6 V
-3 V
70 dB
15 ohm
37 ohm
2/6,GND/-6
28 ns
MC74LVX8051DTG
MC74LVX8051DTG by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 2.5-6V and offers a max on-state resistance of 50 ohm. Ideal for military-grade applications requiring high-speed switching with low power consumption.
NLAST44599DTR2G
NLAST44599DTR2G by Onsemi is a CMOS DPDT switch with 2 functions, operating at -55 to 125 °C. It has a supply voltage of 2-5 V and offers 93 dB isolation. Ideal for military-grade applications requiring fast switching with low on-state resistance.
93 dB
105 ohm
2.5/5
5.5 V
18 ns
41 ns
NLAS4684FCTCG
NLAS4684FCTCG by Onsemi is a CMOS SPDT switch with 2 functions, 10 terminals, and 1 ohm max resistance. Operating b/w -55 to 125 °C, it has separate outputs and 0.5 mm terminal pitch. Ideal for military-grade applications requiring fast switching times and high isolation levels.
SPDT
R-PBGA-B10
e1
1.965 mm
65 dB
.06 ohm
1 ohm
VFBGA
BGA10,3X4,20
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
2/5
1.8 V
50 ns
60 ns
Tin/Silver/Copper (Sn/Ag/Cu)
BALL
BOTTOM
40
1.465 mm
NCS6416DWG
NCS6416DWG by Onsemi is a video multiplexer with 8 channels, operating at 5V supply voltage. It features a small outline package style, dual terminal position, and matte tin finish. Ideal for applications requiring high-quality video switching in commercial temperature environments.
VIDEO MULTIPLEXER
R-PDSO-G20
e3
12.8 mm
20
70 Cel
0 Cel
SOP20,.4
5
2.65 mm
5.25 V
4.75 V
5 V
COMMERCIAL
MATTE TIN
7.5 mm
NS5B1G384DFT2G
NS5B1G384DFT2G by Onsemi is a SPST switch with 15 ohm Ron, 6 ns switch-on time, and -40 to 85 °C operating temp. It's used in industrial applications for signal routing due to its small outline, thin profile, and shrink pitch package style.
SPST
R-PDSO-G5
2 mm
NC
TSSOP5/6,.08
NOT SPECIFIED
1.1 mm
4.5 V
2 ns
6 ns
Matte Tin (Sn) - annealed
1.25 mm
NS5B1G385DTT1G
NS5B1G385DTT1G by Onsemi is a 5-terminal SPST switch with 15 ohm Ron, operating at -40 to 85 °C. It has a supply voltage range of 2-5.5 V and fast switching times of 6 ns on and 2 ns off. Ideal for industrial applications requiring compact, low-profile switches in plastic/epoxy packages.
NO
TSOP5/6,.11,37
.95 mm
1.5 mm
NLAS52231MUR2G
NLAS52231MUR2G by Onsemi is a SPDT switch with 10 terminals, operating from -40 to 85 °C. It has a low on-state resistance of 0.46 ohm and provides 62 dB isolation. Ideal for industrial applications requiring fast switching with separate outputs at supply voltages ranging from 1.65V to 4.5V.
62 dB
.05 ohm
.46 ohm
1.8/4.3
1.65 V
7SB3257DFT2G
The Onsemi 7SB3257DFT2G is a small outline, thin profile multiplexer with 2 channels. It operates b/w -55 to 125 °C and has a max on-state resistance of 15 ohm. Ideal for military-grade applications requiring fast switching times in compact spaces.
R-PDSO-G6
6
4 V
4.8 ns
4.6 ns
7SB3257MUTCG
7SB3257MUTCG by Onsemi is a dual single-ended multiplexer with 2 channels. It operates b/w -55 to 125 °C, with Vsup ranging from 4-5.5V. Featuring a low Ron of 15 ohm, it has fast switch-on/off times of 4.6/4.8 ns, making it ideal for military-grade applications in small outline packages.
R-PDSO-N6
VSON
SMALL OUTLINE, VERY THIN PROFILE
.55 mm
Nickel/Palladium/Gold (Ni/Pd/Au)
7WB383AMX1TCG
7WB383AMX1TCG by Onsemi is a single-ended multiplexer with 8 terminals in a plastic/epoxy grid array package. It features nickel palladium gold terminal finish and is surface mountable. Ideal for applications requiring signal routing and switching in compact electronic devices.
R-PBGA-BU8
GRID ARRAY
BUTT
7WB383BMX1TCG
7WB383BMX1TCG by Onsemi is a single-ended multiplexer with 8 terminals in a rectangular grid array package. It features nickel/palladium/gold terminal finish and is surface mountable. Ideal for applications requiring high-performance switching in compact electronic devices.
7WB383CMX1TCG
SINGLE-ENDED MULTIPLEXER; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: YES; Package Style (Meter): GRID ARRAY; JESD-30 Code: R-PBGA-BU8;
MC74HCT4066ADG
MC74HCT4066ADG by Onsemi is a CMOS SPST switch with 4 functions, Ron of 200 ohm, and isolation of 40 dB. Ideal for military-grade applications requiring fast switching times and low power consumption.
R-PDSO-G14
8.65 mm
4
14
40 dB
30 ohm
200 ohm
SOP14,.25
1.75 mm
.025 A
.04 mA
45 ns
37 ns
3.9 mm
NCN2612MTTWG
The Onsemi NCN2612MTTWG is a 6-function SPDT multiplexer with 3.3V supply voltage, 13 ohm max resistance, and 20ns switch-on time. Ideal for industrial applications requiring separate output signals in a compact chip carrier package with surface mount capability.
R-XQCC-N56
56
13 ohm
QCCN
LCC56,.19X.43,20
CHIP CARRIER
20 ns
Tin (Sn)
NCN7200MTTWG
The Onsemi NCN7200MTTWG is a 7-function multiplexer with 2 channels, operating at temperatures from -40 to 85 °C. It has a max on-state resistance of 16 ohm and a supply current of 1.5 mA at 3.3V. Ideal for industrial applications requiring single-ended multiplexing in surface-mount designs.
R-XQCC-N42
7
42
16 ohm
LCC42,.14X.35,20
.12 A
1.5 mA
TIN
NLAS5113DFT2G
NLAS5113DFT2G by Onsemi is a SPST switch with 6 terminals, operating b/w -40 to 85 °C. It has a low on-state resistance of 1.3 ohm and supports Vsup from 1.65V to 4.5V. Ideal for industrial applications requiring compact, surface-mount switches with precise voltage control.
.4 ohm
1.3 ohm
TSSOP6,.08
4.2 V
NLAS5113MUTBG
NLAS5113MUTBG by Onsemi is a SPST switch with 6 terminals, Vsup ranging from 1.65V to 4.5V, and Ron of 1.3 ohm. It operates in industrial temperature range (-40 to 85 °C) and is ideal for applications requiring a small outline, very thin profile package shape multiplexer & switches with surface mount capability.
R-XDSO-N6
SOLCC6,.04,16
NLAS5213AUSG
NLAS5213AUSG by Onsemi is an 8-terminal DPST switch with a max on-state resistance of 1.4 ohm and off-state isolation of 57 dB. Operating b/w -40 to 85 °C, it's ideal for industrial applications requiring a compact, surface-mountable solution with a nominal voltage of 3.3 V.
DPST
R-PDSO-G8
2.3 mm
57 dB
.16 ohm
1.4 ohm
VSSOP
TSSOP8,.12,20
SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH
.9 mm
NLAS5213BMUTAG
NLAS5213BMUTAG by Onsemi is a dual SPST switch with 1.4 ohm Ron, 57 dB isolation, and 3.3V supply voltage. Ideal for industrial applications requiring high-performance multiplexing in compact spaces due to its small outline package and low on-state resistance.
R-XDSO-N8
SOLCC8,.04,16
NLAS5213BUSG
NLAS5213BUSG by Onsemi is a dual-function SPST switch with 1.4 ohm Ron, 57 dB isolation, and 0.16 ohm resistance match. It operates at -40 to 85 °C, with Vsup ranging from 1.65V to 4.5V. Ideal for industrial applications requiring precise signal routing in compact spaces.
NLAS7222CMUTBG
NLAS7222CMUTBG by Onsemi is a CMOS DPDT switch with 10 terminals, operating at -40 to 85 °C. It has a supply voltage of 1.65-4.5V and offers separate outputs with on-state resistance of 10 ohm. Ideal for industrial applications requiring fast switching (30ns) and high isolation (22dB).
22 dB
.85 ohm
10 ohm
NLAS6234MUTBG
NLAS6234MUTBG by Onsemi is a 2-channel DPDT switch with 3.3V supply, 0.55 ohm max resistance, and 70dB isolation. Ideal for industrial applications requiring separate outputs and break-before-make switching at temperatures ranging from -40 to 85 °C.
.15 ohm
.55 ohm
2.7 V
LC78211-E
The Onsemi LC78211-E is an 8-channel audio/video switch with a CMOS technology. It operates b/w -30 to 75 °C, with power supplies of ±18V and terminal finish of Tin/Bismuth. Suitable for applications requiring separate output channels in a compact rectangular package.
AUDIO/VIDEO SWITCH
18.5 V
-18.5 V
R-PDIP-T30
e6
27 mm
75 Cel
-30 Cel
SDIP
SDIP30,.4
IN-LINE, SHRINK PITCH
+-18
3.95 mm
1 mA
OTHER
Tin/Bismuth (Sn/Bi)
THROUGH-HOLE
1.78 mm
10.16 mm
MC74HCT4066ADR2H
MC74HCT4066ADR2H by Onsemi is a CMOS SPST switch with 4 functions, 120 ohm Ron, and 37 ns switch-on time. Ideal for military-grade applications requiring separate outputs, it operates b/w -55 to 125 °C with a supply voltage range of 4.5-5.5 V.
20 ohm
120 ohm
NLV74HC4053ADWRG
NLV74HC4053ADWRG by Onsemi is a 3-function CMOS multiplexer with 16 terminals. It operates b/w -55 to 125 °C and has a max supply voltage of 6 V. With a peak reflow temp of 260 °C, it's ideal for military-grade applications requiring fast switching times and low on-state resistance.
ALSO OPERATES IN SINGLE SUPPLY VOLTAGE 2 TO 12V
10.3 mm
-4.5 V
12 ohm
SOP16,.4
.08 mA
220 ns
345 ns
NLAST4053DTR2G
NLAST4053DTR2G by Onsemi is a CMOS multiplexer with 3 functions, operating at -55 to 125 °C. It features a max on-state resistance of 26 ohm and peak reflow temp of 260 °C. Ideal for military-grade applications requiring high isolation and fast switching times.
-5.5 V
26 ohm
-5.5/GND,3/5
.05 A
40 ns
MC74VHC4316DTG
MC74VHC4316DTG by Onsemi is a CMOS SPST multiplexer with 4 functions, operating at -55 to 125 °C. It has a max on-state resistance of 90 ohm and separate output voltage. Ideal for military-grade applications due to its small outline package and thin profile design.
50 dB
90 ohm
130 ns
140 ns
NLAS4051SDTR2G
NLAS4051SDTR2G by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates b/w -55 to 125 °C and has a max on-state resistance of 26 ohm. With a package size of 5x4.4 mm, it's ideal for military-grade applications requiring high isolation and fast switching times.
NLAS7213MUTAG
NLAS7213MUTAG by Onsemi is an 8-terminal DPST switch with a 1.65V min supply voltage and 4.5V max supply voltage. It features a max on-state resistance of 9 ohm, switching time of 30 ns, and operates in industrial temperature grades. Ideal for applications requiring fast switching and low on-state resistance in compact designs.
S-XQCC-N8
20 dB
.25 ohm
LCC8,.06SQ,20
NLAS7213MUTBG
DPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VQCCN; Package Shape: SQUARE; Surface Mount: YES;
.07 ohm
8.5 ohm
NLAS7223CMUTBG
NLAS7223CMUTBG by Onsemi is a 10-terminal DPDT chip carrier switch with 2 channels. It operates at -40 to 85 °C, with Vsup ranging from 1.65V to 4.5V. With a nominal off-state isolation of 21 dB and 0.7 ohm resistance match, it's ideal for industrial applications requiring separate output switching in compact designs.
21 dB
.7 ohm
MC74LVXT4051DR2
MC74LVXT4051DR2 by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 2.5V to 6V and offers a max on-state resistance of 37 ohm. With a small outline package style, it is ideal for military-grade applications requiring fast switching times and high isolation levels.
e0
9.9 mm
SOP16,.25
235
TIN LEAD
MC74LVXT4051DT
MC74LVXT4051DT by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 2.5V to 6V and offers a max on-state resistance of 37 ohm. With a compact design and military-grade temperature tolerance, it's ideal for high-performance applications requiring fast switching times.
MC74LVXT4051MEL
MC74LVXT4051MEL by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 2.5V to 6V and offers a max on-state resistance of 37 ohm. With a small outline package style, it is suitable for military-grade applications requiring fast switching times and high isolation levels.
MC74LVXT4051M
MC74LVXT4051M by Onsemi is a CMOS single-ended multiplexer with 8 channels. It operates at temperatures from -55 to 125 °C and has a max on-state resistance of 37 ohm. With a supply voltage range of 2.5V to 6V, it is ideal for military-grade applications requiring fast switching times.
MC74LVXT4052DR2
DIFFERENTIAL MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DIFFERENTIAL MULTIPLEXER
© 2023 All rights reserved
