Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC74LVXT8053MEL by Onsemi is a 3-function CMOS multiplexer with 2/6V supplies, 16 terminals, and 50 ohm Ron. Ideal for military-grade applications, it offers fast switching times of 15ns on and 30ns off, with a small outline package and nickel palladium gold finish.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
AZTECH Wire
$16.210
Problanco Electronics
SupplyDigital Components
Kulean Microsystems
Microchip USA
QUARKTWIN TECHNOLOGY LTD
TANS Electronics
UHIMA Technologies
Corohmni
Corphita
PLASTIC/EPOXY material offers good durability and resistance to environmental factors, making the product reliable for long-term use.
Having 3 functions in one device allows for increased functionality and versatility in various applications, reducing the need for additional components.
Operating at a nominal supply voltage of 3V makes the product suitable for low power consumption applications, contributing to energy efficiency.
With a high maximum operating temperature of 125 °C, the product can withstand harsh environmental conditions without compromising performance.
CMOS technology allows for low power consumption and faster switching speeds, enhancing the overall efficiency and performance of the product.
Multiplexers & Switches MC74LVXT8053MEL attributes and parameters. Explore more Multiplexers & Switches devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Maximum Signal Current:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
MC74LVXT8053MEL Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
B340A-13-F
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Silicon Standard
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
1N4148
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
Rectron
EU2B-YS3203C
Idec
ROTARY SWITCH;
MPC508AU
Burr-Brown Corporation
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX4784ETE+T
Analog Devices
Analog Devices' MAX4784ETE+T is a CMOS multiplexer with 2 channels, 4 functions, and on-state resistance of 3 ohm. It operates at temperatures from -40 to 85 °C and has a supply voltage range of 1.6V to 3.6V. Ideal for industrial applications requiring fast switching times and low power consumption.
ADG508AKNZ
Rochester Electronics
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
DG419DY+T
Analog Devices' DG419DY+T is an 8-terminal SPDT switch with a max on-state resistance of 35 ohm. Operating b/w -40 to 85°C, it offers a nominal voltage of ±15 V and off-state isolation of 68 dB. Ideal for industrial applications requiring fast switching times and low resistance.
FSA2567UMX
Onsemi
FSA2567UMX by Onsemi is a 16-terminal multiplexer with a supply voltage range of 1.65V to 4.3V, offering separate outputs and low on-state resistance of 12 ohm. With a compact chip carrier package style and industrial temperature grade, it is ideal for applications requiring fast switching times and high isolation levels in electronic circuits.
CD74HC4067M96
Intersil
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG412DY
Renesas Electronics
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
HEF4066BT,652
NXP Semiconductors
HEF4066BT,652 by NXP Semiconductors is a CMOS multiplexer with 4 functions. It has a small outline package and operates at temperatures ranging from -40 to 85 °C. It is commonly used in industrial applications requiring separate output channels and low on-state resistance.
77052012A
Siliconix
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 20; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
TS3A44159RGTRG4
TS3A44159RGTRG4 by Texas Instruments is a CMOS SPDT switch with 2 functions, 4 channels, and 0.8 ohm on-state resistance. Operating at -40 to 85 °C, it has a bandwidth of 35 kHz and provides 71 dB isolation. Ideal for industrial applications requiring fast switching and low power consumption.
ADG438FBRZ
ADG438FBRZ by Analog Devices is a CMOS single-ended multiplexer with 8 channels, -15V to +15V power supplies, and 270 ohm max on-state resistance. It is ideal for automotive applications due to its small outline package, dual terminal position, and high off-state isolation of 93 dB.
ADG1434YRUZ-REEL7
ADG1434YRUZ-REEL7 by Analog Devices is a 20-terminal SPDT switch with 4 channels. It operates at -40 to 125 °C, suitable for automotive applications. With a max on-state resistance of 9 ohm and switching time of 545 ns, it offers reliable performance in various electronic systems.
DG408DY
Temic Semiconductors
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Shape: RECTANGULAR; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE;
CD4052BE
Rca Solid State
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MPC508AUG4
The Texas Instruments MPC508AUG4 is a CMOS single-ended multiplexer with 8 channels, operating at industrial temperature grade. It features a max on-state resistance of 1500 ohm and common output voltage. With a package size of 10.3mm x 7.5mm x 2.65mm, it is ideal for applications requiring fast switching times and high isolation levels in industrial settings.
DG212CJ
Maxim Integrated
The Maxim Integrated DG212CJ is a CMOS SPST multiplexer with 4 functions, operating at temperatures from 0 to 70°C. It has a max on-state resistance of 175 ohm and offers separate output voltages at ±15V supplies. Ideal for applications requiring high isolation (70dB) and fast switching times (1000ns on, 500ns off).
ADG719BRMZ
ADG719BRMZ by Analog Devices is an 8-terminal SPDT switch with a max on-state resistance of 12 ohm and break-before-make switching. It operates b/w -40 to 125 °C, suitable for automotive applications due to its CMOS technology and small outline package style.
TMUX1574DYYR
TMUX1574DYYR by Texas Instruments is a 16-terminal SPDT multiplexer with 4 channels, operating at a supply voltage range of 1.5V to 5.5V. It offers a max on-state resistance of 4.5 ohm and nominal bandwidth of 2000 kHz, suitable for automotive applications due to its temperature grade and small outline package style.
DG406DYZ-T
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC74HC4066ADG
MC74HC4066ADG by Onsemi is a CMOS SPST switch with 4 functions, 120 ohm Ron, and 45 ns switch-on time. It operates at -55 to 125 °C and has a MILITARY temperature grade. Ideal for applications requiring fast switching and low on-state resistance in compact designs.
MC74HC4852ADTR2G
MC74HC4852ADTR2G by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at -55 to 125 °C, with Vsup ranging from 2-6V. With a max on-state resistance of 1300 ohm and switching type as break-before-make, it's ideal for military-grade applications requiring precise signal routing.
MC74HC4052ADWR2G
MC74HC4052ADWR2G by Onsemi is a CMOS multiplexer with 4 channels, 170 ohm Ron, and 83 ns switch-on time. It operates at -55 to 125 °C and has a MILITARY temperature grade. Ideal for signal routing in high-performance electronic systems.
MC74HC4051AN
Motorola
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MC74HC4051AN by Onsemi is a CMOS multiplexer with 8 channels. It operates at a nominal voltage of 4.5V and has a max on-state resistance of 170 ohm. This multiplexer is commonly used in applications requiring signal switching and isolation.
MC74HC4052ADG
DIFFERENTIAL MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC74HC4051ADTR2G
MC74HC4051ADTR2G by Onsemi is a single-ended multiplexer with 8 channels. It operates at a nominal voltage of 4.5V and has a max on-state resistance of 170 ohm. This IC is commonly used in applications requiring signal switching and multiplexing.
MC74HC4053ADTR2G
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC74HC4066ADR2G
SPST; Temperature Grade: MILITARY; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC74HC4051ADR2G
MC74HC4051ADR2G by Onsemi is a CMOS multiplexer with 8 channels. It operates at -55 to 125 °C and has a max on-state resistance of 170 ohm. With a package size of 9.9mm x 3.9mm, it's ideal for military-grade applications requiring precise signal switching in compact spaces.
MC74HC4053ADR2G
MC74HC4053ADR2G by Onsemi is a CMOS multiplexer with 3 functions, 16 terminals, and 80 ohm on-state resistance. It operates b/w -55 to 125 °C and has a peak reflow temp of 260 C. Ideal for military-grade applications requiring signal switching with low power consumption.
MC74HC4053ADWR2G
MC74HC4053ADWR2G by Onsemi is a CMOS multiplexer with 3 functions, 16 terminals, and 80 ohm on-state resistance. It operates b/w -55 to 125 °C and is ideal for military-grade applications requiring small outline packages and low power consumption.
MC74VHC1G66DTT1G
SPST; Temperature Grade: MILITARY; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC74HC4052DWR2
MC74HC4052DWR2 by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at temperatures from -55 to 125°C, with a max on-state resistance of 170 ohm and switching type as break-before-make. This small outline IC is ideal for military-grade applications requiring fast switching times and low signal current consumption.
MC74HC4053ADG
MC74HC4052ADR2G
MC74HC4052ADR2G by Onsemi is a CMOS dual-terminal multiplexer with 4 channels. It operates b/w -55 to 125 °C, with a max supply voltage of 6V and on-state resistance of 170 ohm. Ideal for military-grade applications requiring small outline packages and low power consumption.
MC74VHC4051DTR2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved