Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TS5A9411DCKR by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a max on-state resistance of 28 ohm, switching time of 20 ns, and nominal bandwidth of 100 kHz. Ideal for industrial applications requiring low power consumption and high isolation levels.
Median Price
$0.244
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Arrow
1+ parts
$0.243
100+ parts
$0.174
1k+ parts
$0.149
10k+ parts
-
Texas Instruments
$0.166
$0.085
DigiKey
$0.400
$0.213
$0.179
$0.162
Mouser Electronics
$0.180
$0.164
RS (Exports)
$0.319
$0.303
Chip1Stop
$0.146
$0.104
Verical
Nova Conductors
$0.178
Digiode
$0.232
TME
$0.389
$0.168
$0.153
Bristol Electronics
$0.600
$0.300
Maritex
$0.833
$0.190
$0.125
Chip Stock
Vyrian
Cyclops Electronics Ltd
Technoshack Inc.
Diverse Electronics
Ampacity Inc.
$0.112
Semicontronic
$0.124
$0.121
$0.120
Continental Prestige Electronics
$0.175
Argo Parts USA
$0.173
Corphita
$0.220
Corohmni
$6.526
Parana Technologies
$14.276
$14.730
ChromeModa Solutions
$16.041
$13.154
IDEA Electronic Components Group
$15.239
$14.437
Advanced Electronics
$22.442
$21.320
Perfect Parts
Technoshack Inc. (Excess)
Metaverse IC Inc.
Kepictronics
Lixinc
QUARKTWIN TECHNOLOGY LTD
S.R.D Solutions
GreenTree Electronics
A-Z Elektronik GmbH
Futuretech Components
Robosynatics
$0.047
Lucentia Tech
DigiPath Technology Company
$14.463
The plastic/epoxy material used for the package body provides durability and protection for the internal components of the multiplexer or switch.
Being surface mount enables easy and efficient installation of the multiplexer or switch on a circuit board, saving space and reducing assembly time.
The 2.5V supply voltage ensures compatibility with various electronic systems and power sources, offering flexibility in deployment.
The high maximum operating temperature of 85°C allows the multiplexer or switch to function reliably even in harsh environmental conditions.
The low on-state resistance match of 0.06 ohm indicates minimal signal loss or distortion when the switch is in operation, ensuring high performance and signal integrity.
Multiplexers & Switches TS5A9411DCKR attributes and parameters. Explore more Multiplexers & Switches devices from Texas Instruments
Other IC type:
Nominal Bandwidth:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Normal Position (V):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
TS5A9411DCKR Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - Carrier Tape Chg 27/Jul/2016
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3203F
Idec
ROTARY SWITCH;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CD74HC4051M96
Intersil
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA8008AUMX
FSA8008AUMX by Onsemi is a 10-terminal audio/video switch with power supplies of 2.5/4.4V, operating temperature range of -40 to 85°C, and peak reflow temperature of 260°C. This chip carrier package is surface mountable and ideal for industrial applications requiring high-quality signal switching capabilities.
ADG509FBRNZ
ADG509FBRNZ by Analog Devices is a CMOS differential multiplexer with 4 channels. It features a max on-state resistance of 390 ohm and nominal off-state isolation of 93 dB. Ideal for industrial applications requiring precise signal switching within the temperature range of -40 to 85 °C.
ADG5412FBRUZ
ADG5412FBRUZ by Analog Devices is a 4-function SPST switch with a max on-state resistance of 11.2 ohm and nominal off-state isolation of 70 dB. It operates in automotive-grade temperatures from -40 to 125 °C, making it ideal for applications requiring high reliability and precision switching in harsh environments. With a small outline package style and dual terminal position, this switch is suitable for compact designs where space is limited.
SN74LV4052APW
SN74LV4052APW by Texas Instruments is a CMOS differential multiplexer with 2 channels, operating at an industrial temperature grade. It features a max on-state resistance of 225 ohm and nominal bandwidth of 50 kHz. Ideal for applications requiring separate output signals in industrial settings.
ADG719BRMZ-REEL7
ADG719BRMZ-REEL7 by Analog Devices is an 8-terminal SPDT switch with 3V nominal voltage, 12 ohm max on-state resistance, and 67dB off-state isolation. Ideal for automotive applications due to its CMOS technology, -40 to 125°C operating range, and small outline package style.
ADG333ABRSZ-REEL
ADG333ABRSZ-REEL by Analog Devices is a SPDT multiplexer with 4 functions, operating at -40 to 85°C. It has a max on-state resistance of 45 ohm and offers separate outputs. Ideal for industrial applications requiring precise signal switching in compact designs.
DG419DY-T1-E3
Vishay Intertechnology
Vishay Intertechnology's DG419DY-T1-E3 is a SPDT switch with 35 ohm Ron, 250 ns switch-on time, and -40 to 85 °C operating temp. Ideal for industrial applications requiring fast switching and low on-state resistance in compact designs. With a small outline package and dual terminals, it suits various multiplexing needs.
CD74HC4051PWT
CD74HC4051PWT by Texas Instruments is a CMOS multiplexer with 16 terminals, operating voltage range of 2-6V, and on-state resistance of 270 ohm. It is ideal for military-grade applications requiring common output switching at temperatures ranging from -55 to 125°C.
HEF4051BT
Philips Semiconductors
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG439FBRZ
ADG439FBRZ by Analog Devices is a CMOS differential multiplexer with 4 channels, -40 to 125 °C operating temp, and 270 ohm max on-state resistance. It is ideal for automotive applications due to its small outline package, low supply current (0.2 mA), and high off-state isolation (93 dB).
MAX313LEUE-T
Maxim Integrated
MAX313LEUE-T by Maxim Integrated is a 4-function multiplexer with 16 terminals, operating at -40 to 85°C. It features a max on-state resistance of 10 ohm, switching time of 425 ns, and industrial temperature grade. Ideal for applications requiring SPST switches with separate outputs and high isolation levels.
MPC508AU/1KG4
The Texas Instruments MPC508AU/1KG4 is an 8-channel CMOS multiplexer with a max on-state resistance of 1500 ohm and common output. It operates in industrial temperature grade range from -40 to 85 °C, making it suitable for various applications requiring fast switching times of 500 ns. The small outline package with gull wing terminals ensures easy surface mount installation in compact spaces.
ADG734BRUZ-REEL7
ADG734BRUZ-REEL7 by Analog Devices is a 4-function SPDT multiplexer with 20 terminals. It operates at -40 to 85°C, with a max on-state resistance of 4.5 ohm and switching time of 35 ns. Ideal for industrial applications requiring high isolation and low resistance in a compact SOT package.
74LV4051PW,118
NXP Semiconductors
NXP Semiconductors' 74LV4051PW,118 is an 8-channel CMOS multiplexer with a max supply voltage of 6V. It features a nominal off-state isolation of 50dB and a max on-state resistance of 375 ohm. Ideal for automotive applications due to its temperature grade and small outline package style.
TC4066BP(F)
Toshiba
Toshiba's TC4066BP(F) is a CMOS SPST switch with 4 functions, 14 terminals, and max on-state resistance of 1200 ohm. It operates b/w -40 to 85°C, suitable for industrial applications requiring separate output at 5/15V power supplies. The through-hole package in rectangular shape makes it ideal for multiplexing tasks.
HEF4066BT,652
HEF4066BT,652 by NXP Semiconductors is a CMOS multiplexer with 4 functions. It has a small outline package and operates at temperatures ranging from -40 to 85 °C. It is commonly used in industrial applications requiring separate output channels and low on-state resistance.
CD74HC4052M96
Harris Semiconductor
DIFFERENTIAL MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
7705201EC
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
CD74HC4051M96G4
CD74HC4051M96G4 by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals, operating at -55 to 125 °C. It has a max on-state resistance of 270 ohm and can handle a signal current of 0.025 A. Ideal for military-grade applications requiring high bandwidth and low isolation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
TS5A3159ADCKR
TS5A3159ADCKR by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a max on-state resistance of 2.5 ohm and separate output voltage. Ideal for industrial applications requiring a compact, low-power solution with high isolation and fast switching times.
TS5A23166DCUR
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TS5A23157RSER
TS5A23157RSER by Texas Instruments is a 2-channel SPDT multiplexer/switch with a package style of CHIP CARRIER. It operates at a nominal voltage of 1.8V and has a max on-state resistance of 140 ohm. This switch is commonly used in industrial applications requiring high isolation and low resistance switching.
TS5A23159DGSR
TS5A23159DGSR by Texas Instruments is a 2-channel SPDT switch with 1.8/5 V power supplies, 3.5 ohm Ron, and 105 kHz bandwidth. Ideal for industrial applications requiring separate outputs and high isolation levels. Package style: small outline, thin profile, shrink pitch; terminal finish: nickel palladium gold.
TS5A23157DGSR
TS5A23157DGSR by Texas Instruments is a 2-channel SPDT switch with 140 ohm Ron, 220 kHz bandwidth, and 60 dB isolation. Ideal for industrial applications requiring separate outputs and dual terminals in a compact thin profile package. Operating from -40 to 85°C with low supply current of 0.01 mA.
TS5A23159DGSRG4
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
TS5A21366DCUR
TS5A23159DGSRE4
TS5A23159DGSRE4 by Texas Instruments is a 2-function SPDT switch with 1.8/5V power supplies, 2.5 ohm max on-state resistance, and 64dB nominal off-state isolation. Ideal for industrial applications, it operates b/w -40 to 85°C with a compact design of 3x3mm and 0.5mm terminal pitch for space-constrained PCBs.
TS5A3159MDBVREP
TS5A3159MDBVREP by Texas Instruments is a SPDT switch with 1.3 ohm Ron, 95 ns switch-on time, and 63 dB isolation. Ideal for military-grade applications due to its MIL-STD temperature range and low profile package design. Suitable for multiplexing and signal routing in compact electronic systems.
TS5A3159DBVR
TS5A3159DBVR by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85 °C. It has a low on-state resistance of 3.2 ohm and fast switching times of 95 ns on and 70 ns off. Ideal for industrial applications requiring high isolation and low power consumption.
TS5A3166DBVR
TS5A3166DBVR by Texas Instruments is a SPST switch with 3.4 ohm Ron, 19 ns switch-on time, and 64 dB isolation. Ideal for industrial applications requiring a low profile design, it operates b/w -40 to 85 °C with a supply voltage range of 1.65-5.5 V.
TS5A23157RSERG4
TS5A23157RSERG4 by Texas Instruments is a 2-function SPDT switch with 140 ohm Ron, suitable for industrial applications. Operating at -40 to 85 °C, it has a 0.6 mm seated height and offers 60 dB isolation. With a terminal pitch of 0.5 mm and package style of CHIP CARRIER, it's ideal for compact designs requiring fast switching times.
TS5A21366DCURG4
SPST; Moisture Sensitivity Level (MSL): 1; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e4;
TS5A3159DCKR
TS5A3159DCKR by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a max on-state resistance of 3.2 ohm and separate output voltage of 2/5V. Ideal for industrial applications requiring high isolation and fast switching times within a compact package.
TS5A23166DCURG4
TS5A3166DCKRE4
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TS5A3166DCKR
TS5A3166DCKR by Texas Instruments is a SPST switch with 3.4 ohm Ron, 19 ns switch-on time, and 64 dB isolation. Ideal for industrial applications requiring a compact design, it operates b/w -40 to 85 °C with a supply voltage range of 1.65-5.5 V.
TS5A3166DCKRG4
TS5A23166DCURE4
TS5A23166DCURE4 by Texas Instruments is a dual-function SPST switch with 8 terminals, operating b/w -40 to 85 °C. It has a max on-state resistance of 3.9 ohm and offers separate outputs with a nominal isolation of 62 dB. Ideal for industrial applications requiring fast switching times and low on-state resistance.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved