Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SN74LVC2G66DCTR by Texas Instruments is a CMOS SPST switch with 2 channels, low on-state resistance (30 ohm), and fast switching times (5.6 ns on, 6.9 ns off). It operates at industrial temperatures (-40 to 85°C) and has a wide supply voltage range of 1.65V to 5.5V, making it ideal for high-speed signal routing in compact electronic devices.
Median Price
$0.228
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$0.187
100+ parts
$0.127
1k+ parts
$0.065
10k+ parts
-
Mouser Electronics
$0.420
$0.220
$0.185
$0.159
Newark
$0.690
$0.384
$0.298
Arrow
$0.202
Chip1Stop
$0.253
DigiKey
$0.157
Farnell
$0.199
$0.128
$0.089
Element14
$0.439
$0.285
$0.279
Digiode
$0.178
Nova Conductors
$0.360
TME
$0.480
$0.369
$0.237
$0.181
Maritex
$0.588
$0.449
Component Electronics Inc.
$1.270
$0.950
$0.830
Chip Stock
Vyrian
Cyclops Electronics Ltd
EMSNET
A2Z Electronics, Inc.
ACDS - Activité Composants Distribution Service
Sensible Micro Corp
Semtec, LLC
Mil-Aero Solutions, Inc.
Atlantic Semiconductor
Bristol Electronics
Goldney Electronics S.L.
Prism Electronics
Ampacity Inc.
Semicontronic
$0.155
$0.154
Corphita
$0.168
Aranea Global
$0.353
$0.339
Argo Parts USA
$0.349
Continental Prestige Electronics
$0.569
$0.362
$0.243
Corohmni
$5.039
Advanced Electronics
$19.033
$17.320
$15.607
Parana Technologies
$19.577
$19.576
ChromeModa Solutions
$21.997
$18.038
IDEA Electronic Components Group
$20.897
$19.797
Perfect Parts
Lixinc
GreenTree Electronics
Cyclops Electronics Ltd (Excess)
Futuretech Components
Glotronic Ltd.
Authorized Procurement Solutions
DigiPath Technology Company
$19.832
A-Z Elektronik GmbH
The use of plastic/epoxy material makes the product lightweight and durable, ideal for portable or rugged applications.
Being surface mountable allows for easy and efficient installation on circuit boards, saving space and simplifying assembly.
Having 2 functions in one multiplexer or switch provides flexibility and versatility in routing signals or data.
The nominal supply voltage of 2.3V is within a common operating range, ensuring compatibility with a variety of systems.
With a high maximum operating temperature of 85°C, the product can withstand extended use in demanding environments without overheating.
The CMOS technology used in the product offers low power consumption, high noise immunity, and compatibility with a wide range of digital systems.
Multiplexers & Switches SN74LVC2G66DCTR attributes and parameters. Explore more Multiplexers & Switches devices from Texas Instruments
Other IC type:
Nominal Bandwidth:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Normal Position (V):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
SN74LVC2G66DCTR Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Assembly Site 16/Jan/2017
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
ADG736BRMZ-REEL
Analog Devices
ADG736BRMZ-REEL by Analog Devices is a CMOS SPDT switch with 2 functions, operating at temperatures from -40 to 125°C. With a max on-state resistance of 12 ohm and off-state isolation of 62 dB, it's ideal for automotive applications requiring separate outputs and fast switching times. The small outline package with a thin profile and shrink pitch makes it suitable for space-constrained designs.
TS5A3159ADCKR
TS5A3159ADCKR by Texas Instruments is a SPDT switch with 6 terminals, operating at -40 to 85°C. It has a max on-state resistance of 2.5 ohm and separate output voltage. Ideal for industrial applications requiring a compact, low-power solution with high isolation and fast switching times.
ADG1404YRUZ
ADG1404YRUZ by Analog Devices is a CMOS single-ended multiplexer with 4 channels. It operates at a supply voltage range of ±15/+12/±5 V and offers a max on-state resistance of 4 ohm. Ideal for automotive applications, this switch has a small outline package style and can handle temperatures from -40 to 125°C.
MC74HC4066ADG
MC74HC4066ADG by Onsemi is a CMOS SPST switch with 4 functions, 120 ohm Ron, and 45 ns switch-on time. It operates at -55 to 125 °C and has a MILITARY temperature grade. Ideal for applications requiring fast switching and low on-state resistance in compact designs.
CD4051BNSR
CD4051BNSR by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals and a supply voltage range of 3-20V. It features a max on-state resistance of 1050 ohm, switching time of 720 ns, and operates in temperatures from -55 to 125°C. Ideal for military-grade applications requiring high isolation and low signal current.
TC4066BP(N,F)
Toshiba
SPST;
DG412DY
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG1411YRUZ-REEL7
ADG1411YRUZ-REEL7 by Analog Devices is a CMOS SPST switch with 4 functions, operating at -40 to 125°C. It has a max on-state resistance of 5.4 ohm and offers separate outputs. Ideal for automotive applications due to its small size, low power consumption, and high isolation of 80 dB.
HEF4051BTT,118
NXP Semiconductors
HEF4051BTT,118 by NXP Semiconductors is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 3-15V and offers fast switching times of 80ns on-state and 230ns off-state. This industrial-grade device in a small outline package is ideal for applications requiring precise signal routing in temperature-sensitive environments.
CD4053BCM
CD4053BCM by Texas Instruments is a CMOS multiplexer with 3 functions, 2 channels, and on-state resistance of 400 ohm. It operates b/w -40 to 85°C, has a supply voltage range of 5-15V, and features a small outline package suitable for industrial applications.
ADG451BRZ-REEL
ADG451BRZ-REEL by Analog Devices is a 4-function SPST multiplexer with 16 terminals. It operates at -40 to 85°C, with a max on-state resistance of 12 ohm and switching time of 220 ns. Ideal for industrial applications requiring precise signal routing in compact spaces.
TS5A23166DCURG4
TS5A23166DCURG4 by Texas Instruments is a dual SPST switch with 2 channels, operating at industrial temperature grade. It features a max on-state resistance of 4 ohm and nominal bandwidth of 150 kHz. Ideal for applications requiring separate outputs and low power consumption in compact designs.
DG442DY
Temic Semiconductors
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL;
CD4053BPWR
CD4053BPWR by Texas Instruments is a CMOS multiplexer with 3 functions, operating at -55 to 125°C. It features a max on-state resistance of 1050 ohm and a bandwidth of 30 kHz. Ideal for military-grade applications requiring low power consumption and high reliability in compact designs.
CD4066BM
CD4066BM by Texas Instruments is a CMOS SPST switch with 4 channels, 1300 ohm Ron, and 40 kHz bandwidth. It operates at -55 to 125 °C and has a MILITARY temperature grade. Ideal for applications requiring low on-state resistance and high signal current in compact designs.
NC7SB3157P6X
The Onsemi NC7SB3157P6X is a SPDT multiplexer with 6 terminals, operating at -40 to 85°C. It has a supply voltage range of 1.65-5.5V and offers common output with 30 ohm on-state resistance. Ideal for industrial applications requiring fast switching times (13ns on, 7ns off) and high isolation (57dB).
CD74HC4067SM96G4
CD74HC4067SM96G4 by Texas Instruments is a 24-terminal multiplexer with a supply voltage range of 2-6V. It features a max on-state resistance of 270 ohm, switching time of 60ns, and bandwidth of 89kHz. Ideal for military-grade applications requiring high-speed signal routing in compact spaces.
ADG738BRUZ-REEL
Analog Devices' ADG738BRUZ-REEL is an 8-channel audio/video switch with a max on-state resistance of 11 ohm and switching voltage of 3/5 V. This CMOS technology multiplexer has a small outline package shape, making it ideal for industrial applications requiring fast switching times and high isolation levels.
7705201EX
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
DG508ACJ+
SINGLE-ENDED MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
SN74LVC1G3157DCKR
SN74LVC1G3157DCKR by Texas Instruments is a SPDT switch with 6 terminals, operating at a voltage range of 1.65V to 5.5V. It offers a max on-state resistance of 30 ohm and a bandwidth of 340 kHz, suitable for industrial applications requiring fast switching times and high isolation levels. The package style is small outline with thin profile, making it ideal for space-constrained designs.
SN74LVC1G3157DBVR
SN74LVC1G3157DBVR by Texas Instruments is a SPDT switch with 6 terminals, operating at temperatures from -40 to 85 °C. It has a max on-state resistance of 30 ohm and a switching time of 14 ns, suitable for industrial applications requiring common output switching functions.
SN74LVC1G3157DCKRG4
SN74LVC1G3157DCKRG4 by Texas Instruments is a SPDT switch with 6 terminals, operating at temperatures from -40 to 85°C. It has a max resistance of 50 ohm and supports power supplies of 1.8/5V. This CMOS technology-based switch is commonly used in industrial applications for signal multiplexing due to its compact size and low on-state resistance.
SN74LV4052ADBR
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LV4051ADR
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LVC1G3157DRLR
SN74LVC1G3157DRLR by Texas Instruments is a SPDT switch with 6 terminals, operating at a voltage range of 1.65V to 5.5V. It offers a max on-state resistance of 30 ohm and fast switching times of 14 ns turn-on and 7.5 ns turn-off, making it ideal for industrial applications requiring precise signal routing in compact spaces.
SN74LVC1G3157DRYR
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LVC1G3157DCK3
SN74LVC1G3157DCK3 by Texas Instruments is a SPDT multiplexer with 6 terminals, operating temperature range of -40 to 125°C. It has a max on-state resistance of 50 ohm and nominal bandwidth of 340 kHz. Ideal for automotive applications due to its small outline, thin profile package style.
SN74LVC1G3157YZPR
SN74LVC1G3157YZPR by Texas Instruments is a SPDT switch with 1 channel, 30 ohm Ron, and 340 kHz bandwidth. It operates at -40 to 85 °C and has a very thin profile package style. Ideal for industrial applications requiring low on-state resistance and high isolation levels.
SN74LV4052APWR
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LV4051ARGYR
SN74LV4051ARGYR by Texas Instruments is a CMOS multiplexer with 16 terminals, operating at temperatures from -40 to 85°C. It has a max supply voltage of 5.5V and on-state resistance of 225 ohm, suitable for industrial applications requiring high-speed switching up to 35 kHz. The chip carrier package style with very thin profile makes it ideal for space-constrained designs needing separate outputs and low power consumption.
SN74LV4051APWR
SN74LV4051APWR by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals, operating at a supply voltage range of 2-5.5V. It offers a max on-state resistance of 225 ohm and nominal bandwidth of 35 kHz, making it ideal for industrial applications requiring precise signal switching in compact spaces.
SN74LV4052APWRG4
SN74LVC2G66DCUR
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LV4051ARGYRG4
SN74LV4051ARGYRG4 by Texas Instruments is a CMOS multiplexer with 8 channels, 180 ohm on-state resistance, and 45 dB off-state isolation. It operates b/w -40 to 85 °C with a supply voltage range of 2-5.5 V. Ideal for industrial applications requiring fast switching times and low power consumption.
SN74LV4052APW
SN74LV4052APW by Texas Instruments is a CMOS differential multiplexer with 2 channels, operating at an industrial temperature grade. It features a max on-state resistance of 225 ohm and nominal bandwidth of 50 kHz. Ideal for applications requiring separate output signals in industrial settings.
SN74LV4052ADR
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LV4053ADBR
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LV4051APWRG4
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LVC1G66DBVR
SN74LVC1G66DBVR by Texas Instruments is a SPST switch with 5 terminals, operating at 2.3V to 5.5V. It offers low on-state resistance of 20 ohm and fast switching times of 6.5ns on and 6.9ns off, suitable for industrial applications requiring high-speed signal routing in compact spaces.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved