Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
LB8503V-MPB-E
Onsemi
LB8503V-MPB-E by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 7.5-17 V, and output current of 0.003 A. Ideal for BRUSH DC MOTOR CONTROLLER applications due to its small outline package and bipolar technology. Operates b/w -30 to 95 °C temperature range.
ALSO OPERATES IN 5.5 TO 6.5V SUPPLY
BRUSH DC MOTOR CONTROLLER
R-PDSO-G16
e6
5.2 mm
3
1
16
95 Cel
-30 Cel
.003 A
PLASTIC/EPOXY
LSSOP
SSOP16,.25
RECTANGULAR
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
260
12
Not Qualified
1.5 mm
Motion Control Electronics
6.5 mA
17 V
7.5 V
12 V
YES
BIPOLAR
OTHER
TIN BISMUTH
GULL WING
.65 mm
DUAL
30
4.4 mm
LV8012T-MPB-E
LV8012T-MPB-E by Onsemi is a Motion Control IC with 24 terminals, operating at 5V. It features a small outline package, suitable for brush DC motor control applications. With a max output current of 1.4A and BICMOS technology, it ensures efficient performance in commercial extended temperature environments.
ALSO OPERATES IN 2 TO 7V SUPPLY
R-PDSO-G24
6.5 mm
24
75 Cel
-20 Cel
1.4 A
TSSOP
TSSOP24,.25,20
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
5
1.2 mm
1.2 mA
5.5 V
2.7 V
5 V
BICMOS
COMMERCIAL EXTENDED
.5 mm
LV8013T-A-MPB-E
LV8013T-A-MPB-E by Onsemi is a Motion Control IC with 24 terminals, operating at 5V. It features a max output current of 3.8A and supports power supplies of 5V and 12V. Ideal for BRUSH DC MOTOR CONTROL applications due to its BICMOS technology and compact design.
ALSO OPERATES IN 2 TO 15V SUPPLY
3.8 A
5,12
LV8013T-A-TLM-E
LV8013T-A-TLM-E by Onsemi is a Motion Control IC with 24 terminals, operating at 5V. It features a max output current of 3.8A and supports power supplies of 5V and 12V. Ideal for BRUSH DC MOTOR CONTROL applications due to its BICMOS technology and compact design.
LV8014T-MPB-E
LV8014T-MPB-E by Onsemi is a Motion Control IC with 24 terminals, operating at 5V. It features a small outline package style and can handle up to 2.5A output current. Ideal for AC motor control applications due to its BICMOS technology and dual terminal position.
ALSO OPERATES IN 2 TO 7V
AC MOTOR CONTROLLER
2.5 A
LV8014T-TLM-E
LV8014T-TLM-E by Onsemi is a Motion Control IC with 24 terminals, operating at 5V. It features a max output current of 2.5A and BICMOS technology. Ideal for AC motor control applications due to its small outline package and dual terminal position.
LV8062FA-AH
LV8062FA-AH by Onsemi is a Motion Control IC with 5V supply voltage, 0.7A output current, and BICMOS technology. Ideal for BRUSH DC MOTOR CONTROL applications due to its small outline package, dual terminals, and 3mm length.
OUTPUT CURRENT IN LOCK-DETECTION MODE IS 1A, SEATED HGT-NOM
S-PDSO-G10
e3
3 mm
10
.7 A
TSSOP10,.19,20
SQUARE
1.03 mm
3 mA
6 V
2.5 V
TIN
LV8104V-MPB-H
LV8104V-MPB-H by Onsemi is a Motion Control IC with 44 terminals, operating at -20 to 80 °C. It supports a supply voltage range of 16-28V and output current up to 0.015A. Ideal for Brushless DC Motor control applications due to its BICMOS technology and compact design.
BRUSHLESS DC MOTOR CONTROLLER
R-PDSO-G44
15 mm
44
80 Cel
.015 A
SSOP44,.3
1.7 mm
8.2 mA
28 V
16 V
24 V
5.6 mm
LV8104V-TLM-H
LV8104V-TLM-H by Onsemi is a Motion Control IC with 24V supply, 44 terminals, and BICMOS technology. Ideal for Brushless DC Motor Controllers, it operates b/w -20 to 80 °C and has a compact rectangular package design for surface mount applications.
LV8111V-TLM-H
LV8111V-TLM-H by Onsemi is a Motion Control IC with 24V supply voltage, 3A output current, and BICMOS technology. Ideal for Brushless DC Motor Controllers, it operates b/w -25 to 80 °C and has a small outline package with dual terminals.
-25 Cel
3 A
HLSSOP
SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH
35 V
10 V
LV8112V-MPB-H
LV8112V-MPB-H by Onsemi is a Motion Control IC with 24V supply, 3A output current, and BICMOS technology. Ideal for Brushless DC Motor Controllers, it operates b/w -25 to 80 °C with a small outline package and dual terminal position.
LV8121V-TLM-H
LV8121V-TLM-H by Onsemi is a Motion Control IC with 24V supply, 3.5A output current, and BICMOS technology. Ideal for Brushless DC Motor Controllers, it operates b/w -30 to 100 °C and has a compact rectangular package with 44 terminals for surface mounting applications.
100 Cel
3.5 A
4.7 mA
8 V
LV8136V-MPB-H
LV8136V-MPB-H by Onsemi is a Motion Control IC with 30 terminals, operating at -40 to 105 °C. It features a supply voltage range of 9.5-16.5 V and output current of 0.015 A, suitable for Brushless DC Motor Controllers in industrial applications.
R-PDSO-G30
9.75 mm
105 Cel
-40 Cel
SSOP30,.3
15
8 mA
16.5 V
9.5 V
15 V
INDUSTRIAL
LV8139JA-AH
LV8139JA-AH by Onsemi is a Motion Control IC with 30 terminals, operating at -40 to 105 °C. It has a supply voltage range of 9.5-16.5 V and output current of 0.015 A. Ideal for industrial applications requiring Brushless DC Motor control in compact spaces.
6 mA
LV8163QA-BH
LV8163QA-BH by Onsemi is a Motion Control IC with 5V supply voltage, 0.7A output current, and BICMOS technology. Ideal for BRUSH DC MOTOR CONTROL applications due to its small outline package, dual terminals, and wide operating temperature range (-30 to 95 °C).
S-PDSO-N10
2.6 mm
HVSON
SOLCC10,.1,20
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
.55 mm
1.6 mA
2 V
MATTE TIN
NO LEAD
LV8804FV-MPB-H
LV8804FV-MPB-H by Onsemi is a Motion Control IC with 12V supply, 1.2A output current, and BICMOS technology. Ideal for AC motor control applications due to its small outline package and dual terminal position. Operating temperature ranges from -30 °C to 95°C.
R-PDSO-G20
20
1.2 A
SSOP20,.25,20
4 mA
LV8804FV-TRM-H
LV8804FV-TRM-H by Onsemi is a Motion Control IC with 12V supply voltage, 1.2A output current, and BICMOS technology. It is used as an AC motor controller in applications requiring small outline, low profile packages for surface mount assembly.
LV8804V-MPB-H
LV8804V-MPB-H by Onsemi is a Motion Control IC with 12V supply voltage, 1.2A output current, and BICMOS technology. Ideal for brush DC motor control applications due to its small outline package, dual terminal position, and low profile design.
R-PDSO-G36
36
SOP36,.3,32
.8 mm
LV8805SV-MPB-H
LV8805SV-MPB-H by Onsemi is a Motion Control IC with 12V supply, 1.2A output current, and BICMOS technology. Ideal for AC motor control applications in industrial settings due to its small outline package and wide temperature range from -40 to 95 °C.
3.6 mA
LV8805V-MPB-H
LV8805V-MPB-H by Onsemi is a Motion Control IC with 12V supply, 1.2A output current, and BICMOS technology. Ideal for AC motor control applications due to its small outline package, dual terminals, and industrial temperature grade suitability.
LV8805V-TLM-H
LV8805V-TLM-H by Onsemi is a Motion Control IC with 12V supply voltage, 1.2A output current, and BICMOS technology. Ideal for AC motor control applications in industrial settings due to its compact size, low profile package, and wide operating temperature range from -40 °C to 95°C.
LV8824QA-2H
LV8824QA-2H by Onsemi is a Motion Control IC with 24V supply, suitable for Brushless DC Motor control. Features include 32 terminals, BICMOS technology, and a wide operating temperature range (-40 to 105 °C). Ideal for industrial applications requiring precise motor control in compact spaces.
S-XQCC-N32
5 mm
32
.05 A
UNSPECIFIED
HVQCCN
LCC32,.2SQ,20
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
33 V
7 V
QUAD
LV8827LFQA-NH
LV8827LFQA-NH by Onsemi is a Motion Control IC with 24V supply voltage, 1.5A output current, and BICMOS technology. Ideal for Brushless DC Motor Controllers, it operates b/w -40 to 80°C and has a compact square package with matte tin finish.
S-XQCC-N24
4 mm
1.5 A
LCC24,.16SQ,20
LV8860V-MPB-H
LV8860V-MPB-H by Onsemi is a Motion Control IC with 24V supply voltage, 0.7A output current, and BICMOS technology. Ideal for BRUSH DC MOTOR CONTROL applications due to its small outline package style and industrial temperature grade suitability.
ALSO OPERATES IN 6 TO 34V SUPPLY
3.5 mA
34 V
LV8860V-TLM-H
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS30-TE-L-E
SS30-TE-L-E by Onsemi is a Motion Control IC with 20 terminals, BICMOS technology, and 5V nominal voltage. Ideal for Brushless DC Motor control applications due to its low profile chip carrier package and quad terminal position. Operating temperature range from -30 °C to 95°C makes it versatile for various environments.
S-XQCC-N20
VQCCN
LCC20,.12SQ,20
CHIP CARRIER, VERY THIN PROFILE
2.5 mA
2.2 V
AMIS30624C6244G
AMIS30624C6244G by Onsemi is a Motion Control IC with 20 terminals, operating voltage of 8-29V, and max output current of 0.8A. Ideal for automotive applications due to its temp range of -40 to 125°C and stepper motor control capabilities.
ALSO NEEDS 4.75V TO 5.5V VDD SUPPLY
STEPPER MOTOR CONTROLLER
12.7762 mm
2
125 Cel
.8 A
SOP
SOP20,.4
SMALL OUTLINE
5,6.5/29
2.6416 mm
29 V
AUTOMOTIVE
1.27 mm
7.5 mm
AMIS30624C6244RG
AMIS30624C6244RG by Onsemi is a Motion Control IC with 20 terminals, operating voltage range of 8-29V, and max output current of 0.8A. Ideal for automotive applications due to its small outline package and temp range of -40 to 125 °C.
AMIS30624C6245G
AMIS30624C6245G by Onsemi is a Motion Control IC with 32 terminals, operating voltage of 8-29V. It features a max output current of 0.8A and operates in automotive temperature grade (-40 to 125°C). Ideal for stepper motor control applications due to its compact square package shape and surface mount capability.
7 mm
LCC32,.27SQ,25
.9 mm
AMIS30624C6245RG
AMIS30624C6245RG by Onsemi is a Motion Control IC with 32 terminals and a nominal voltage of 12V. It operates in temperatures ranging from -40 to 125 °C and supports power supplies of 5,6.5/29V. Ideal for automotive applications, it features a max output current of 0.8A for stepper motor control.
AMIS30521C5212G
AMIS30521C5212G by Onsemi is a Motion Control IC with 32 terminals, operating voltage of 6-30V. It features a max output current of 1.6A, suitable for automotive applications. With a compact square package style and peak reflow temperature of 260 °C, it's ideal for stepper motor control in tight spaces.
ALSO NEEDS 4.5V TO 5.25V VDD SUPPLY
1.6 A
5,6/30
30 V
AMIS30521C5212RG
AMIS30521C5212RG by Onsemi is a Motion Control IC with 32 terminals, operating voltage of 6-30V, and max output current of 1.6A. Ideal for automotive applications due to its temp range of -40 to 125 °C and terminal finish of matte tin.
AMIS30522C5222G
AMIS30522C5222G by Onsemi is a Motion Control IC with 32 terminals, operating voltage of 6-29V, and max output current of 1.6A. Ideal for automotive applications due to its temp range of -40 to 125 °C and terminal finish in Tin (Sn).
ALSO NEEDS 4.5V TO 5.25V LOGIC SUPPLY
Tin (Sn)
40
AMIS30522C5222RG
AMIS30522C5222RG by Onsemi is a Motion Control IC with 32 terminals, operating voltage range of 6-30V, and max output current of 1.6A. Ideal for automotive applications due to its compact size, low power consumption, and high temperature tolerance up to 125°C.
AMIS30623C6239G
AMIS30623C6239G by Onsemi is a Motion Control IC with 20 terminals, operating voltage of 6.5-29V, and max output current of 0.8A. Ideal for automotive applications due to its small outline package and temp range of -40 to 125 °C.
10 mA
6.5 V
AMIS30623C6239RG
AMIS30623C6239RG by Onsemi is a Motion Control IC with 20 terminals, operating voltage of 6.5-29V, and max output current of 0.8A. Ideal for automotive applications due to its temp range of -40 to 125 °C and compact small outline package design.
DRV8809PAP
Texas Instruments
STEPPER MOTOR CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 64; Package Code: HTFQFP; Package Shape: SQUARE; Surface Mount: YES;
S-PQFP-G64
e4
10 mm
64
50 Cel
-10 Cel
8 A
HTFQFP
TQFP64,.47SQ
FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
7/40
40 V
18 V
27 V
COMMERCIAL
NICKEL PALLADIUM GOLD
DRV8810PAP
STEPPER MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 64; Package Code: HTFQFP; Package Shape: SQUARE; Surface Mount: YES;
TLE7185E
Infineon Technologies
AC MOTOR CONTROLLER; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Moisture Sensitivity Level (MSL): 3;
12.8 mm
HSSOP
SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH
2.65 mm
32 V
7.6 mm
LB1838M-MPB-E
LB1838M-MPB-E by Onsemi is a Motion Control IC with 14 terminals, operating at -20 to 75 °C. It has a supply voltage range of 2.5V to 9V and max current of 18mA. Ideal for stepper motor control applications due to its compact size and bipolar technology.
ALSO REQUIRED SUPPLY VOLTAGE 1.8 TO 9 VOLT
R-PDSO-G14
8 mm
14
SOP14,.25,40
18 mA
9 V
3 V
Tin/Bismuth (Sn/Bi)
1 mm
BTS7750GP
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 15; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES; Minimum Supply Voltage (Vsup): 3.2 V;
R-PSSO-G15
e0
21.6 mm
12 A
TO-263
42 V
3.2 V
NMOS
TIN LEAD
1.4 mm
SINGLE
9.25 mm
NCV33033DWR2
NCV33033DWR2 by Onsemi is a Motion Control IC with 20V nominal voltage, suitable for automotive applications. It features a small outline package style, operates b/w -40 to 125 °C, and has a max output current of 0.1A. Ideal for brushless DC motor control in various electronic systems.
.1 A
235
22 mA
20 V
Tin/Lead (Sn/Pb)
NCV33035DWR2
NCV33035DWR2 by Onsemi is a motion control IC with a nominal voltage of 20V, suitable for automotive applications. It features a max output current of 0.1A and operates in temperatures ranging from -40 °C to 125°C. This bipolar technology IC comes in a small outline package with dual terminal position and gull wing form.
15.395 mm
SOP24,.4
20 mA
A3936SED
Allegro MicroSystems
A3936SED by Allegro MicroSystems is a motion control IC with a square package and 44 terminals. It operates at a nominal voltage of 5V and has a max output current of 3A. This IC is commonly used as a brushless DC motor controller.
S-PQCC-J44
16.585 mm
85 Cel
QCCJ
LDCC44,.7SQ
CHIP CARRIER
4.57 mm
J BEND
A3977SEDTR
Allegro MicroSystems A3977SEDTR is a Motion Control IC with 2.5A max output current, suitable for stepper motor control. Operates at -20 to 85°C, with supply voltage range of 3-5.5V. Features NMOS technology in a square chip carrier package for surface mount applications.
240
3.3/5,35
A3977SED
Allegro MicroSystems' A3977SED is a Motion Control IC with 44 terminals, operating voltage of 3-5.5V, and max output current of 2.5A. Ideal for stepper motor control applications due to its NMOS technology and compact chip carrier package style.
NOT SPECIFIED
A3977SLPTR
Allegro MicroSystems' A3977SLPTR is a Motion Control IC with 28 terminals, operating at -20 to 85°C. It supports stepper motor control, offering a max output current of 2.5A at a supply voltage range of 3-5.5V. The small outline package with gull wing terminals and thin profile makes it suitable for various motion control applications requiring precise voltage regulation and thermal management.
R-PDSO-G28
9.7 mm
28
HTSSOP
TSSOP28,.25
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
A3977SLP
Allegro MicroSystems' A3977SLP is a Motion Control IC with 28 terminals, operating at -20 to 85 °C. It supports a max output current of 2.5A and nominal voltage of 5V, suitable for Stepper Motor Controllers in various applications.
© 2023 All rights reserved
