Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
LB11850VA-TLM-H
Onsemi
LB11850VA-TLM-H by Onsemi is a Motion Control IC with 24 terminals, operating voltage of 5.5-16V, and max output current of 0.02A. Ideal for AC motor control applications due to its compact size, low profile package, and bipolar technology.
ALSO OPERATES IN 4.5 TO 5.5V SUPPLY
AC MOTOR CONTROLLER
R-PDSO-G24
e6
6.5 mm
3
1
24
95 Cel
-30 Cel
.02 A
PLASTIC/EPOXY
LSSOP
SSOP24,.25,20
RECTANGULAR
SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
260
12
Not Qualified
1.5 mm
Motion Control Electronics
15 mA
16 V
5.5 V
12 V
YES
BIPOLAR
OTHER
TIN BISMUTH
GULL WING
.5 mm
DUAL
30
4.4 mm
LB11851FA-BH
LB11851FA-BH by Onsemi is a Motion Control IC with 12V supply voltage, suitable for industrial applications. Features include small outline package, dual terminal position, and matte tin finish. Ideal for brushless DC motor control with max output current of 0.02A and operating temperature range from -40 to 90°C.
SEATED HGT-NOM
BRUSHLESS DC MOTOR CONTROLLER
S-PDSO-G10
e3
3 mm
10
90 Cel
-40 Cel
TSSOP
TSSOP10,.19,20
SQUARE
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
1.03 mm
6.5 mA
6 V
INDUSTRIAL
MATTE TIN
LB11851MC-BH
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
R-PDSO-G10
4.9 mm
SSOP
SOP10,.25,40
SMALL OUTLINE, SHRINK PITCH
1.75 mm
1 mm
3.9 mm
LB11852RV-TLM-H
LB11852RV-TLM-H by Onsemi is a Motion Control IC with 12V supply voltage, 20 terminals, and 1.5mm seated height. Ideal for AC motor control applications due to its low profile design, -30 to 95 °C operating temperature range, and 16V max supply voltage.
R-PDSO-G20
5.2 mm
20
SSOP20,.25,20
LB11862MC-AH
LB11862MC-AH by Onsemi is a Motion Control IC with 10 terminals, operating voltage of 5V, and max output current of 0.8A. Ideal for industrial applications requiring a brushless DC motor controller in compact spaces due to its small outline package style and dual terminal position.
85 Cel
.8 A
5
17 mA
16.8 V
3.8 V
5 V
TIN
LB11867FV-MPB-E
LB11867FV-MPB-E by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 5.5-16 V, and max output current of 0.02 A. Ideal for Brushless DC Motor control applications due to its compact size, low profile design, and bipolar technology.
R-PDSO-G16
16
SSOP16,.25
9.5 mA
.65 mm
LB11867FV-MPB-H
LB11867FV-MPB-H by Onsemi is a Motion Control IC with 12V supply voltage, suitable for Brushless DC Motor Controllers. It features 16 terminals, operates b/w -30 to 95 °C, and has a compact rectangular package style. Ideal for applications requiring precise motor control in limited space.
LB11867FV-TLM-E
LB11867FV-TLM-E by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 5.5-16 V, and max output current of 0.02 A. Ideal for Brushless DC Motor Controllers, it has a compact rectangular package suitable for surface mount applications at temperatures ranging from -30 to 95 °C.
LB11867FV-TLM-H
LB11867FV-TLM-H by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 5.5-16 V, and max output current of 0.02 A. Ideal for Brushless DC Motor control applications due to its compact size, low profile design, and temp range of -30 to 95°C.
LB11867RV-MPB-H
LB11867RV-MPB-H by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 5.5-16V, and max output current of 0.02A. Ideal for Brushless DC Motor Controllers, it has a compact design (4.4mm x 5.2mm) suitable for applications requiring precise motion control in tight spaces at temperatures ranging from -30 to 95 °C.
LB11868V-MPB-H
LB11868V-MPB-H by Onsemi is a Motion Control IC with 20 terminals, operating at -30 to 95 °C. It has a supply voltage range of 4-16 V and max output current of 0.03 A. Ideal for Disk Drive Motor Controllers due to its small outline package and low profile design.
DISK DRIVE MOTOR CONTROLLER
.03 A
10.5 mA
4 V
LB11868V-TLM-H
LB11868V-TLM-H by Onsemi is a Motion Control IC with 20 terminals, operating at -30 to 95 °C. It has a supply voltage range of 4-16 V and max output current of 0.03 A. Ideal for Disk Drive Motor Controllers due to its small outline package and low profile design.
LB11870-MPB-E
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 48; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
R-PDSO-G48
17.8 mm
48
80 Cel
-20 Cel
2.3 A
HSSOP
SSOP48/54,.4
SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH
2.4 mm
21 mA
28 V
9.5 V
24 V
COMMERCIAL EXTENDED
7.9 mm
LB11870-TRM-E
LB11870-TRM-E by Onsemi is a Motion Control IC with 48 terminals, operating voltage of 24V, and max output current of 2.3A. Ideal for Brushless DC Motor Controllers, it has a temp range of -20 to 80 °C and terminal finish of Tin Bismuth.
LB11872H-MPB-E
LB11872H-MPB-E by Onsemi is a Motion Control IC with 24V nominal voltage, 1.2A max output current, and -20 to 80 °C operating temperature range. Ideal for Brushless DC Motor Controllers in commercial applications due to its small outline package and dual terminal position.
R-PDSO-G28
15.2 mm
28
1.2 A
SOP28/34,.4,32
2.45 mm
22 mA
10 V
.8 mm
LB11873-MPB-E
LB11873-MPB-E by Onsemi is a Motion Control IC with 36 terminals, operating at -20 to 80 °C. It has a supply voltage range of 9.5-28V and can handle up to 1.8A output current. Ideal for Brushless DC Motor control applications due to its small outline package and bipolar technology.
R-PDSO-G36
36
1.8 A
SOP36/44,.4,32
28 mA
LB11876-MPB-E
LB11876-MPB-E by Onsemi is a Motion Control IC with 12V supply voltage, 36 terminals, and max output current of 0.03A. Ideal for Brushless DC Motor Controllers, it operates b/w -20 to 80 °C in commercial applications. Package style is small outline, low profile, shrink pitch.
15 mm
SOP36,.3,32
1.7 mm
25 mA
17 V
8 V
5.6 mm
LB11876-TLM-E
LB11876-TLM-E by Onsemi is a Motion Control IC with 36 terminals, operating at -20 to 80 °C. It has a supply voltage range of 8-17V and output current of 0.03A. Ideal for Brushless DC Motor control applications due to its compact size and low profile design.
LB11921T-MPB-E
LB11921T-MPB-E by Onsemi is a Motion Control IC with 36 terminals, operating at -20 to 80 °C. It has a supply voltage range of 4.4V to 7V and output current of 0.01A, suitable for Brushless DC Motor Controllers in commercial applications.
9.75 mm
.01 A
TSSOP36,.3,20
1.2 mm
32 mA
7 V
4.4 V
LB11948T-MPB-E
LB11948T-MPB-E by Onsemi is a Motion Control IC with 30 terminals, operating at -20 to 85 °C. It features a supply voltage of 3-15 V, output current of 0.5 A, and is ideal for Stepper Motor Controller applications. The package style is small outline, thin profile, shrink pitch in plastic/epoxy material.
STEPPER MOTOR CONTROLLER
R-PDSO-G30
.5 A
TSSOP30,.3
15 V
3 V
LB11948T-TLM-E
LB11948T-TLM-E by Onsemi is a Motion Control IC with 30 terminals, operating voltage of 3-15V. It features a max output current of 0.5A, suitable for Stepper Motor Controllers. The IC has a compact design with small outline and thin profile, making it ideal for applications requiring precise motion control in tight spaces.
LB11961-MPB-H
LB11961-MPB-H by Onsemi is a Motion Control IC with 12V supply, 1A output current, and -30 to 90 °C operating temperature range. Ideal for Brushless DC Motor control applications due to its small outline package and dual terminal position.
R-PDSO-G14
14
1 A
HLSSOP
SSOP14/20,.25
SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH
24 mA
4.5 V
LB11961-TLM-H
LB11961-TLM-H by Onsemi is a Motion Control IC with 12V supply voltage, 1A output current, and -30 to 90 °C operating temperature range. Ideal for Brushless DC Motor Controllers in applications requiring small outline, low profile packages with gull wing terminals.
LB11961V-MPB-E
LB11961V-MPB-E by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 4.5-16 V, and max output current of 1A. Ideal for Brushless DC Motor control applications due to its bipolar technology and compact design with low profile package style.
LB11961V-MPB-H
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11961V-TLM-H
LB11961V-TLM-H by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 4.5-16V, and max output current of 1A. Ideal for Brushless DC Motor Controllers, it has a temp range of -30 to 90 °C and compact dimensions of 5.2mm x 4.4mm for various applications.
LB11967V-MPB-E
LB11967V-MPB-E by Onsemi is a Motion Control IC with 12V supply, 20 terminals, and 0.05A output current. Ideal for Brushless DC Motor control applications due to its bipolar technology and compact design. Operates b/w -30 to 95 °C with a low profile package style.
.05 A
SSOP20,.25
14 mA
LB11967V-MPB-H
LB11967V-MPB-H by Onsemi is a Motion Control IC with 20 terminals, operating at -30 to 95 °C. It has a supply voltage range of 6-16 V and can handle a max output current of 0.05 A. Ideal for Brushless DC Motor control applications due to its small outline package and low profile design.
LB11967V-TLM-E
LB11967V-TLM-E by Onsemi is a Motion Control IC with 20 terminals, operating at -30 to 95 °C. It has a supply voltage range of 6-16 V and output current of 0.05 A. Ideal for Brushless DC Motor control applications due to its small size, low profile package and bipolar technology.
LB11970FV-MPB-E
LB11970FV-MPB-E by Onsemi is a Motion Control IC with 12V supply voltage, 1.2A output current, and 18 terminals in a small outline package. Ideal for Brushless DC Motor Controllers, it operates b/w -30 to 90 °C and supports surface mount installation.
ALSO OPERATES IN 3.5 TO 16V SUPPLY
R-PDSO-G18
8 mm
18
SOP18,.25,32
18 mA
LB11970FV-MPB-H
LB11970FV-MPB-H by Onsemi is a Motion Control IC with 12V supply voltage, 1.2A output current, and 18 terminals. Ideal for Brushless DC Motor control applications due to its compact size, dual terminal position, and low profile package style. Operating temperature ranges from -30 °C to 90°C making it suitable for various industrial environments.
LB11970FV-TLM-E
LB11970FV-TLM-E by Onsemi is a Motion Control IC with 12V supply, 1.2A output current, and 18 terminals in a small outline package. Ideal for Brushless DC Motor Controllers, operating b/w -30 to 90 °C, it's surface-mountable with tin bismuth finish and dual terminal position.
LB11970RV-MPB-H
LB11970RV-MPB-H by Onsemi is a Motion Control IC with 12V supply, 1.2A output current, and -30 to 90 °C operating range. Ideal for Brushless DC Motor Controllers, it features small outline packaging and dual terminals for versatile applications in various industries.
LB11988H-TLM-E
LB11988H-TLM-E by Onsemi is a Motion Control IC with 12V supply, 1.3A output current, and -30 to 85 °C operating temperature range. Ideal for Brushless DC Motor Controllers, it features a small outline package with dual terminals and Gull Wing form suitable for surface mount applications.
OUTPUT BLOCK POWER SUPPLY IS 5 TO 22
1.3 A
SOP28/36,.4,32
22 V
LB11988HR-MPB-E
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11988HR-TLM-E
LB11988HR-TLM-E by Onsemi is a Motion Control IC with 12V supply voltage, 1.3A output current, and -40 to 85 °C operating temperature range. Ideal for Brushless DC Motor Controllers in industrial applications due to its compact size and high reliability.
LB11988HR-TLM-H
LB11988HR-TLM-H by Onsemi is a Motion Control IC with 12V supply voltage, 1.3A output current, and 28 terminals. It is ideal for Brushless DC Motor Controllers in industrial applications due to its bipolar technology and compact rectangular package design. With a wide operating temperature range from -40 °C to 85°C, it offers reliable performance for motion control systems.
LB11988HR-TRM-E
LB11988HR-TRM-E by Onsemi is a Motion Control IC with 28 terminals, operating at -40 to 85 °C. It has a supply voltage range of 5-22 V and output current up to 1.3 A. Ideal for industrial applications requiring Brushless DC Motor control in compact spaces.
LB1638MC-AH
LB1638MC-AH by Onsemi is a Motion Control IC with 10 terminals, operating at 5V. It features a small outline package style and supports brush DC motor control applications. With a temperature range of -20 to 75 °C, it is ideal for commercial extended use.
ALSO OPERATES IN 2.2 TO 9V SUPPLY
BRUSH DC MOTOR CONTROLLER
75 Cel
40 mA
9 V
2.5 V
LB1838JM-MPB-E
LB1838JM-MPB-E by Onsemi is a Motion Control IC with 14 terminals, operating voltage of 2.5-9V, and max current of 18mA. Ideal for stepper motor control applications in industrial settings due to its compact size, low profile design, and wide temperature range from -40 to 85 °C.
ALSO REQUIRE 1.8V TO 9V
SOP14,.25,40
LB1838JM-TRM-E
LB1838JM-TRM-E by Onsemi is a Motion Control IC with 14 terminals, operating voltage of 2.5-9V, and max temp of 85°C. Ideal for stepper motor control applications due to its compact size, low profile package, and industrial temperature grade suitability.
LB1862MC-AH
LB1862MC-AH by Onsemi is a Motion Control IC with 10 terminals, operating voltage of 3.8-16.8V, and output current of 0.5A. It is a Brushless DC Motor Controller in a small outline package suitable for applications requiring precise motor control at temperatures ranging from -30 to 90°C.
5 mm
1.55 mm
9.1 mA
LB1930M-TLM-E
LB1930M-TLM-E by Onsemi is a Motion Control IC with 3V supply voltage, 1A output current, and 10 terminals. Ideal for brush DC motor control applications due to its small outline package, dual terminal position, and bipolar technology.
31 mA
10.8 V
2.2 V
LB1933M-MPB-E
LB1933M-MPB-E by Onsemi is a Motion Control IC with 14 terminals, operating voltage of 1.8-7.5V, and max output current of 1A. Ideal for stepper motor control applications due to its small outline package and bipolar technology, suitable for commercial extended temperature environments.
7.5 V
1.8 V
LB1937T-MPB-E
LB1937T-MPB-E by Onsemi is a Motion Control IC with 24 terminals, operating at -30 to 85 °C. It features a supply voltage range of 2.5V to 9.5V and a max current of 16mA. Ideal for stepper motor control applications due to its compact size and bipolar technology.
TSSOP24,.25,20
16 mA
LB1937T-TLM-E
LB1937T-TLM-E by Onsemi is a Motion Control IC with 24 terminals, operating at -30 to 85 °C. It has a supply voltage range of 2.5V to 9.5V and peak reflow temp of 260 °C. Ideal for stepper motor control applications due to its compact size and low power consumption.
LB1960MC-AH
LB1960MC-AH by Onsemi is a Motion Control IC with 12V supply voltage, 1A output current, and 8 terminals. Ideal for brush DC motor control applications due to its small outline package, operating temperature range of -30 to 85 °C, and bipolar technology.
R-PDSO-G8
8
SOP
SOP8,.25
SMALL OUTLINE
5 mA
3.6 V
1.27 mm
LB1962MC-AH
LB1962MC-AH by Onsemi is a Motion Control IC with 10 terminals, operating voltage of 3.8-16.8V, and output current of 0.5A. It is a Brushless DC Motor Controller in a small outline package suitable for applications requiring precise motor control at temperatures ranging from -30 to 90 °C.
© 2023 All rights reserved
