Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
AMIS30532C5321G
Onsemi
AMIS30532C5321G by Onsemi is a Motion Control IC with 32 terminals, operating voltage range of 6-30V. It features a max output current of 1.6A and operates in automotive temperature grade (-40 to 125 °C). Ideal for stepper motor control applications due to its compact square package design and surface-mount capability.
STEPPER MOTOR CONTROLLER
S-XQCC-N32
e3
7 mm
1
32
125 Cel
-40 Cel
1.6 A
UNSPECIFIED
HVQCCN
SQUARE
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
.9 mm
30 V
6 V
12 V
YES
AUTOMOTIVE
MATTE TIN
NO LEAD
.65 mm
QUAD
AMIS30542C5421G
AMIS30542C5421G by Onsemi is a Motion Control IC with 32 terminals, operating voltage range of 6-30V. It features a max output current of 3.2A, suitable for automotive applications due to its wide temperature range (-40 to 125 °C) and compact square package design (7x7mm).
3.2 A
AMIS30543C5431RG
AMIS30543C5431RG by Onsemi is a Motion Control IC with 32 terminals, operating voltage of 6-30V, and output current of 3A. Ideal for automotive applications, it features a compact square package shape and operates in temperatures ranging from -40 to 125°C.
3 A
LCC32,.27SQ,25
NOT SPECIFIED
5,6/30
Not Qualified
1 mm
Motion Control Electronics
12 mA
DRV8823QDCARQ1
Texas Instruments
Texas Instruments' DRV8823QDCARQ1 is a Motion Control IC with 48 terminals, operating at -40 to 125 °C. It supports supply voltages from 8V to 32V, output current up to 1.5A, and is ideal for automotive applications due to AEC-Q100 screening level.
R-PDSO-G48
e4
12.5 mm
3
48
1.5 A
PLASTIC/EPOXY
HTSSOP
TSSOP48,.3,20
RECTANGULAR
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
260
8/32
AEC-Q100
1.2 mm
8 mA
32 V
8 V
24 V
NICKEL PALLADIUM GOLD
GULL WING
.5 mm
DUAL
30
6.1 mm
L6480H
STMicroelectronics
STMicroelectronics L6480H is a Motion Control IC with 38 terminals, operating at power supplies of 7.5V and 48V. It features a small outline package shape for stepper motor control applications, with surface mount capability and peak reflow temperature of 260°C.
R-PDSO-G38
38
TSSOP
TSSOP38,.25,20
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
7.5,48
TIN
TB9080FG
Toshiba
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 64; Package Code: QFP; Package Shape: SQUARE; Surface Mount: YES;
BRUSHLESS DC MOTOR CONTROLLER
S-PQFP-G64
64
QFP
FLATPACK
18 V
7 V
BIPOLAR
DRV8833PW
DRV8833PW by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage of 2.7-10.8V, and max output current of 2A. Ideal for brush DC motor control applications due to its compact rectangular package and industrial temperature grade suitability.
BRUSH DC MOTOR CONTROLLER
R-PDSO-G16
5 mm
16
85 Cel
2 A
TSSOP16,.25
3/10
3 mA
10.8 V
2.7 V
5 V
INDUSTRIAL
Nickel/Palladium/Gold (Ni/Pd/Au)
4.4 mm
BD16805FV-ME2
ROHM
ROHM's BD16805FV-ME2 is a Motion Control IC with 8-18V power supplies, 40 terminals, and -40 to 110°C operating temperature range. Ideal for Brush DC Motor control applications due to its small outline package and industrial temperature grade suitability.
R-PDSO-G40
13.6 mm
40
110 Cel
SSOP
SSOP40,.3
SMALL OUTLINE, SHRINK PITCH
8/18
1.9 mm
30.4 mA
5.4 mm
DRV3211QPFPQ1
DRV3211QPFPQ1 by Texas Instruments is a Motion Control IC with 80 terminals, operating at -40 to 125 °C. It features a supply voltage range of 5.3-18 V and is ideal for automotive applications as a Brushless DC Motor Controller in a square-shaped package with Gull Wing terminals.
S-PQFP-G80
12 mm
80
HTFQFP
TQFP80,.55SQ
FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
12
35 mA
5.3 V
A3907ECGTR
Allegro MicroSystems
Allegro MicroSystems' A3907ECGTR is a Motion Control IC with 6 terminals, operating voltage of 2.5-5V, and max output current of 0.1023A. Ideal for industrial applications requiring precise control over brushless DC motors in a compact package with a low profile design.
R-PBGA-B6
1.465 mm
6
.1023 A
VFBGA
BGA6,2X3,20
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
2.5/5
.55 mm
2 mA
5.5 V
2.3 V
BALL
BOTTOM
.965 mm
CAT3211MUTAG
CAT3211MUTAG by Onsemi is a Motion Control IC with 12 terminals, operating voltage of 2.7-5.5V, and temp range of -40 to 85 °C. Ideal for Brushless DC Motor Controllers in industrial applications due to its compact size (2x1.7mm) and low supply current (0.6mA).
R-XQCC-N12
2 mm
VQCCN
LCC10,.06X.07,16
CHIP CARRIER, VERY THIN PROFILE
3/5
.6 mA
.4 mm
1.7 mm
LV8702V-MPB-H
LV8702V-MPB-H by Onsemi is a Motion Control IC with 24V supply, 3A output current, and BCDMOS technology. Ideal for stepper motor control applications in industrial settings due to its compact size, low profile design, and wide operating temperature range from -40 to 85 °C.
R-PDSO-G44
e6
15 mm
44
HLSSOP
SSOP44,.3
SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE, SHRINK PITCH
24
6.5 mA
9 V
BCDMOS
TIN BISMUTH
5.6 mm
LV8702V-TLM-H
LV8702V-TLM-H by Onsemi is a Motion Control IC with 24V nominal voltage, 3A max output current, and BCDMOS technology. Ideal for industrial applications requiring precise stepper motor control in a compact rectangular package.
DRV8832QDGQRQ1
DRV8832QDGQRQ1 by Texas Instruments is a Motion Control IC with 3-6V supply, operating from -40 to 125°C. It's a Brush DC Motor Controller in a small outline package suitable for automotive applications. Features include dual terminals, nickel-palladium-gold-silver finish, and gull wing form.
S-PDSO-G10
3 mm
2
10
TSSOP10,.19,20
3/6
1.1 mm
6.8 V
2.75 V
3 V
NICKEL PALLADIUM GOLD SILVER
TLE4726GXUMA1
Infineon Technologies
TLE4726GXUMA1 by Infineon is a Motion Control IC for automotive applications. It operates at 5V with a max output current of 1A. With a temp range of -40 to 125°C, it's ideal for stepper motor control in compact designs.
R-PDSO-G24
15.6 mm
1 A
SOP
SMALL OUTLINE
2.65 mm
6.5 V
4.5 V
1.27 mm
7.6 mm
BTS7710GPNTMA1
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 15; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE;
R-PSSO-G15
21.6 mm
15
15 A
TO-263
42 V
3.2 V
NMOS
1.4 mm
SINGLE
9.25 mm
BTS7740GNUMA1
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; No. of Functions: 1;
R-PDSO-G28
18.1 mm
28
8 A
BTS7750GNUMA1
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Length: 18.1 mm;
12 A
TDA21801XUMA1
AC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AC MOTOR CONTROLLER
R-PDSO-G8
8
70 Cel
0 Cel
1.753 mm
13.2 V
COMMERCIAL
4 mm
TCA3727GXUMA1
TCA3727GXUMA1 by Infineon is a Motion Control IC for stepper motor control. It operates at 4.5-6.5V with a max output current of 1A. With a temp range of -40 to 125°C, it's ideal for automotive applications due to its bipolar technology and small outline package design.
TLE4206GXUMA1
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Width (mm): 4 mm;
R-PDSO-G14
8.75 mm
14
1.75 mm
TLE7189FXUMA1
AC MOTOR CONTROLLER; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
S-PQCC-N48
9 mm
.01 A
20 V
TLE4209GXUMA1
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; No. of Functions: 1;
.9 A
TLE4729GXUMA1
STEPPER MOTOR CONTROLLER; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL;
16 V
BTS7710GNUMA1
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Nominal Supply Voltage (Vsup): 12 V;
1.8 V
BTS7700GNUMA1
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Seated Height: 2.65 mm;
9 A
TLE7189QKXUMA1
AC MOTOR CONTROLLER; No. of Terminals: 64; Package Code: HLFQFP; Package Shape: SQUARE; Surface Mount: YES; Minimum Supply Voltage (Vsup): 5.5 V;
10 mm
HLFQFP
FLATPACK, HEAT SINK/SLUG, LOW PROFILE, FINE PITCH
1.6 mm
14 V
NICKEL GOLD PALLADIUM SILVER
TLE4208GXUMA1
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Width (mm): 7.6 mm;
TLE6209RAUMA2
Infineon's TLE6209RAUMA2 is a Motion Control IC for BRUSH DC MOTOR CONTROL. It operates at 5.2-13.2V with 7A output current, suitable for various applications. With a compact SMALL OUTLINE package and GULL WING terminals, it offers efficient motion control solutions.
ALSO NEEDS A SUPPLY OF 4.75 TO 5.25V
R-PDSO-G20
15.9 mm
20
7 A
3.5 mm
40 V
5.2 V
11 mm
TLE7184FXUMA1
BRUSHLESS DC MOTOR CONTROLLER; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Minimum Supply Voltage (Vsup): 6 V;
45 V
NCV70501DW002G
Onsemi's NCV70501DW002G is a Motion Control IC with 16 terminals, operating voltage range of 6-29V, and max output current of 0.3A. Ideal for automotive applications due to its bipolar technology, it features a small outline package style and can withstand temperatures from -40 to 125 °C.
9.9 mm
.3 A
SOP16,.25
6/29
15 mA
29 V
3.9 mm
NCV70501DW002R2G
NCV70501DW002R2G by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 6-29V, and output current of 0.3A. Ideal for automotive applications, this bipolar technology IC features a small outline package style and matte tin terminal finish.
NCV70624DW010G
NCV70624DW010G by Onsemi is a Motion Control IC with 20 terminals, operating at supply voltages of 5-29V. It features a max output current of 0.8A and is designed for stepper motor control applications. The package style is small outline, making it suitable for compact designs requiring precise motion control.
12.7762 mm
.8 A
SOP20,.4
5,6.5/29
2.6416 mm
7.5184 mm
NCV70624DW010R2G
NCV70624DW010R2G by Onsemi is a motion control IC with a rectangular package shape and small outline style. It operates at a nominal voltage of 14V and has a max output current of 0.8A. This IC is commonly used as a stepper motor controller in various applications.
NCV70627DQ001G
NCV70627DQ001G by Onsemi is a Motion Control IC with 36 terminals, operating at supply voltages from 5.5V to 29V. It features a max output current of 0.8A and is designed for stepper motor control applications. The package style is small outline with a heat sink, suitable for surface mount assembly in various electronic devices.
R-PDSO-G36
10.3 mm
36
HSSOP
SSOP36,.4,20
SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH
5.5/29
10 mA
NICKEL GOLD PALLADIUM
7.5 mm
NCV70627DQ001R2G
NCV70627DQ001R2G by Onsemi is a Motion Control IC with 36 terminals, operating at a supply voltage range of 5.5V to 29V. It features a max output current of 0.8A and is designed for stepper motor control applications. The package style is small outline with heat sink, making it suitable for compact designs requiring precise motion control.
LV8731V-MPB-H
LV8731V-MPB-H by Onsemi is a Motion Control IC with 24V supply, 2.5A output current, and BCDMOS technology. Ideal for stepper motor control applications due to its small outline package, low profile design, and dual terminal position. Operating temperature ranges from -20 °C to 85°C making it suitable for various industrial environments.
-20 Cel
2.5 A
5 mA
OTHER
LV8731V-TLM-H
LV8731V-TLM-H by Onsemi is a Motion Control IC with 24V supply voltage, 2.5A output current, and BCDMOS technology. Ideal for stepper motor control applications due to its small outline package, dual terminal position, and low profile design. Operating temperature range from -20 °C to 85°C makes it versatile for various industrial uses.
LV8732V-MPB-H
LV8732V-MPB-H by Onsemi is a Motion Control IC with 24V supply voltage, 2.5A output current, and BCDMOS technology. Ideal for stepper motor control applications due to its small outline package, dual terminal position, and peak reflow temperature of 260 °C.
LV8734V-MPB-H
LV8734V-MPB-H by Onsemi is a Motion Control IC with 44 terminals, operating at -40 to 85 °C. It has a supply voltage range of 9-32 V and output current up to 1.75 A, suitable for industrial stepper motor control applications. The package is small outline, low profile, with gull wing terminals and BCDMOS technology.
1.75 A
DRV3203QPHPQ1
Texas Instruments' DRV3203QPHPQ1 is a Motion Control IC with 12V supply, suitable for automotive applications. It features AEC-Q100 screening, operates b/w -40 to 125 °C, and has a terminal pitch of 0.5 mm. This IC is designed for Brushless DC Motor Controllers in compact spaces.
ALSO OPERATES WITH THE RANGE OF 4.5V TO 18V AND 18V TO 28.5V SUPPLY
S-PQFP-G48
TQFP48,.35SQ
27 mA
DRV3203QPHPRQ1
DRV3203QPHPRQ1 by Texas Instruments is a Motion Control IC with 48 terminals, operating voltage of 12V, and temp range of -40 to 125°C. Ideal for automotive applications, it features a flatpack package style and nickel palladium gold terminal finish.
DRV3210QPHPQ1
Texas Instruments' DRV3210QPHPQ1 is a Motion Control IC with 12V supply, suitable for automotive applications. It features AEC-Q100 screening, operates b/w -40 to 125 °C, and has 48 terminals in a square package. Ideal for brushless DC motor control with a terminal pitch of 0.5 mm.
DRV3210QPHPRQ1
Texas Instruments' DRV3210QPHPRQ1 is a Motion Control IC with 48 terminals, suitable for automotive applications. It operates at -40 to 125°C, with Vsup ranging from 5.3V to 18V. The IC features a flatpack package style and terminal finish of NiPdAu.
LV8127T-MPB-H
LV8127T-MPB-H by Onsemi is a Motion Control IC with 36 terminals, operating b/w -30 to 100 °C. It supports Brush DC Motor control at Vsup ranging from 12-18V. The small outline package with gull wing terminals makes it suitable for various motion control applications.
ALSO OPERATES WITH THE RANGE OF 18V TO 185V SUPPLY
9.75 mm
100 Cel
-30 Cel
Tin/Bismuth (Sn/Bi)
DRV201AYMBR
Texas Instruments DRV201AYMBR is a Motion Control IC with 6 terminals, operating b/w -40 to 85°C. It has a supply voltage range of 2.5V to 4.8V and features a very thin profile grid array package suitable for Voice Coil Motor Controllers in industrial applications.
VOICE COIL MOTOR CONTROLLER
VFLGA
.3 mm
4.8 V
2.5 V
3.7 V
COPPER NICKEL PALLADIUM
BUTT
LV8105W-MPB-E
LV8105W-MPB-E by Onsemi is a Motion Control IC with 24V supply voltage, 48 terminals, and BICMOS technology. Ideal for Brushless DC Motor Controllers, it operates b/w -20 to 80 °C and has a low profile flatpack package style.
80 Cel
.02 A
LFQFP
QFP48,.35SQ,20
FLATPACK, LOW PROFILE, FINE PITCH
8.8 mA
28 V
BICMOS
COMMERCIAL EXTENDED
LV8105W-TLM-E
LV8105W-TLM-E by Onsemi is a Motion Control IC with 24V supply, suitable for Brushless DC Motor control. Features include 48 terminals, BICMOS technology, and a temperature range of -20 to 80 °C. Ideal for applications requiring precise motor control in compact spaces.
© 2023 All rights reserved
