Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LV8734V-MPB-H by Onsemi is a Motion Control IC with 44 terminals, operating at -40 to 85 °C. It has a supply voltage range of 9-32 V and output current up to 1.75 A, suitable for industrial stepper motor control applications. The package is small outline, low profile, with gull wing terminals and BCDMOS technology.
Median Price
$1.440
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$1.200
10k+ parts
$1.070
Nova Conductors
$0.975
Digiode
$1.121
Vyrian
Corohmni
$0.956
Argo Parts USA
Netroflash
Ampacity Inc.
$1.000
Semicontronic
$0.970
Corphita
$1.062
AZTECH Wire
$17.782
TANS Electronics
Kulean Microsystems
UHIMA Technologies
Problanco Electronics
SupplyDigital Components
Microchip USA
Continental Prestige Electronics
$1.010
Perfect Parts
The use of plastic/epoxy material makes the product lightweight and durable, ideal for applications where weight is a concern.
The surface mount feature allows for easy and efficient assembly, saving time and labor costs.
The 24 V supply voltage provides sufficient power for the motion control IC to operate effectively in various applications.
The BCDMOS technology offers a good balance between performance and power efficiency, making the product suitable for a wide range of applications.
The high maximum output current allows the motion control IC to drive motors and other components with high power requirements.
Motion Control ICs LV8734V-MPB-H attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LV8734V-MPB-H Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 24/Jul/2015
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Taitron Components
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Good-ark Electronics
Changzhou Galaxy Century Microelectronics
Diotec Semiconductor Ag
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
Sensitron Semiconductor
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
A3959SLBTR
Allegro MicroSystems
Allegro MicroSystems' A3959SLBTR is a motion control IC with 24 terminals, suitable for stepper motor control. It operates at 5V with a max output current of 6A and can withstand temperatures from -20 to 85°C. The small outline package makes it ideal for surface mount applications in various industries.
TLE7183QUXUMA1
AC MOTOR CONTROLLER; Terminal Finish: NICKEL PALLADIUM GOLD SILVER; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 3;
SLA7076MPRT
Sanken Electric
STEPPER MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: ZIG-ZAG; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
A5976GLPTR-T
Allegro MicroSystems' A5976GLPTR-T is a Motion Control IC with 28 terminals, operating temperature range of -40 to 105°C. It is a Stepper Motor Controller with max output current of 2.8A, suitable for industrial applications requiring precise motion control in compact spaces.
IRMCF343TY
The Infineon Technologies IRMCF343TY is a Motion Control IC with 64 terminals, operating at a supply voltage range of 3-3.6V. It features a low profile flatpack package style suitable for AC motor control applications in industrial environments, with a temperature range of -40 to 85°C. The IC is surface mountable and has a compact square shape measuring 10x10mm.
TB67H450FNG
Toshiba
Motion Control Electronics;
DRV8350HRTVT
Texas Instruments
DRV8350HRTVT by Texas Instruments is a Motion Control IC with 32 terminals, operating voltage range of 9-75V, and max output current of 1A. Ideal for automotive applications, it features a temp range of -40 to 125°C and nickel/palladium/gold terminal finish.
DRV8910QPWPRQ1
Texas Instruments' DRV8910QPWPRQ1 is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It has a supply voltage range of 3-5.5 V and is AEC-Q100 compliant for automotive applications. The IC features Gull Wing terminals, PLASTIC/EPOXY package material, and is suitable for BRUSH DC MOTOR CONTROL.
FSB50550BSL
FSB50550BSL by Onsemi is a Motion Control IC with 23 terminals, operating voltage range of 13.5V to 16.5V, and max output current of 7A. This BRUSHLESS DC MOTOR CONTROLLER is designed for automotive applications, featuring a temperature range from -40°C to 125°C and hybrid technology for efficient performance.
BD6222HFP-TR
ROHM
ROHM's BD6222HFP-TR is a Motion Control IC with 1 function, suitable for BRUSH DC MOTOR CONTROL. Operating at -40 to 85°C, it has a supply voltage range of 6-15V and can handle up to 2A output current. With a compact design (9.395mm x 8mm x 2.005mm), it's ideal for industrial applications requiring precise motor control in tight spaces.
A3987SLPTR-T
Allegro MicroSystems' A3987SLPTR-T is a Motion Control IC with 24 terminals, operating voltage of 3-50V, and output current up to 1.5A. Ideal for stepper motor control applications due to its compact size, NMOS technology, and dual terminal position.
DRV8316RQRGFRQ1
DRV8316RQRGFRQ1 by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 4.5V to 35V, and max output current of 8A. Ideal for Brushless DC Motor Controllers, it features AEC-Q100 screening and operates in temperatures from -40°C to 125°C.
DRV8881PPWPR
DRV8881PPWPR by Texas Instruments is a Motion Control IC with a supply voltage range of 6.5-45V, output current up to 2.5A, and operating temperature from -40 to 125°C. Ideal for automotive applications, this stepper motor controller features a small outline package with dual terminals and gull wing form factor.
DRV8889QPWPRQ1
DRV8889QPWPRQ1 by Texas Instruments is a Motion Control IC with 24 terminals, operating voltage range of 4.5V to 45V, and temperature range from -40°C to 125°C. It is designed for automotive applications as a stepper motor controller with surface mount capability in a small outline package.
A4955GLPTR-T
Allegro MicroSystems' A4955GLPTR-T is a Motion Control IC with 20 terminals in a small outline package. It operates b/w -40°C to 105°C, suitable for industrial applications. With a min supply voltage of 5.5V and max of 50V, it's ideal for brush DC motor control systems.
L6474PD
STMicroelectronics
L6474PD by STMicroelectronics is a Motion Control IC with 36 terminals, operating at 3.3V supply voltage and supporting up to 7A output current. It is a Stepper Motor Controller in a small outline package suitable for surface mount applications. The IC features NMOS technology, Gull Wing terminal form, and has a max supply voltage of 45V.
NCV7725DQBR2G
NCV7725DQBR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 150 °C. It features a supply voltage range of 3.15-5.25 V and output current up to 0.5 A. Ideal for automotive applications due to AEC-Q100 screening level and compact design in small outline package style.
DRV2603RUNT
Texas Instruments' DRV2603RUNT is a Motion Control IC with 10 terminals, operating voltage of 2.5-5.2V, and temp range -40 to 85°C. Ideal for brush DC motor control applications due to its compact square chip carrier design and very thin profile package style. Suitable for industrial use with nickel palladium gold terminal finish and moisture sensitivity level of 2.
FSBB20CH60CL
FSBB20CH60CL by Onsemi is a Motion Control IC with 27 terminals, operating b/w -40 to 125°C. It supports AC motor control, offering a max output current of 40A at supply voltages ranging from 13.5V to 16.5V. Ideal for automotive applications due to its temperature grade and flange mount package style.
MC34931SEK
NXP Semiconductors
MC34931SEK by NXP Semiconductors is a Motion Control IC with 32 terminals, operating at 5-36V. It features BICMOS technology, GULL WING terminals, and can withstand industrial temperatures. Ideal for BRUSH DC MOTOR CONTROL applications due to its small outline package and surface mount capability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LV8728MR-AH
LV8728MR-AH by Onsemi is a Motion Control IC with 30 terminals, operating voltage range of 9-32V. It offers 2A output current, suitable for Stepper Motor control applications. With compact dimensions (15.2mm x 7.9mm x 2.45mm), it can operate in temperatures from -30°C to 85°C efficiently.
LV8732V-TLM-H
LV8732V-TLM-H by Onsemi is a Motion Control IC with 24V supply voltage, 2.5A output current, and BCDMOS technology. Ideal for stepper motor control applications due to its small outline package and dual terminal position. Operating temperature range from -20°C to 85°C makes it versatile for various environments.
LV8746V-TLM-E
LV8746V-TLM-E by Onsemi is a Motion Control IC with 44 terminals, operating voltage range of 9-24 V. It features a max output current of 1.2 A and operates in temperatures from -20 to 85°C. Ideal for stepper motor control applications due to its compact size and advanced BICMOS technology.
LV8761V-TLM-E
LV8761V-TLM-E by Onsemi is a Motion Control IC with 36 terminals, operating at -20 to 85°C. It has a power supply of 5,24V and uses BICMOS technology. Ideal for applications requiring precise motion control in compact designs.
LV8760T-TLM-E
BRUSH DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8713T-TLM-H
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8761V-MPB-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 36; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8771VH-TLM-H
LV8771VH-TLM-H by Onsemi is a Motion Control IC with 24V supply, 28 terminals, and BICMOS technology. It operates b/w -20 to 85°C, has a peak reflow temp of 260°C, and low supply current of 3mA. Ideal for applications requiring precise motion control in various industries.
LV8735V-MPB-H
STEPPER MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 44; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Sanyo Semiconductor
LV8772-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 28; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LV8713T-MPB-H
LV8713T-MPB-H by Onsemi is a motion control IC with 24 terminals and power supplies of 3.3V and 12V. It operates in temperatures ranging from -20°C to 85°C and has a max supply current of 1.7mA. This IC is suitable for applications requiring precise motion control in various industries.
LV8716QA-MH
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LV8712T
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8726TA-NH
STEPPER MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; Surface Mount: YES;
LV8727
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 25; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LV8702V-TLM-H
LV8712T-MPB-H
LV8727-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 25; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LV8734V
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 44; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved