Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AMIS30622C6227G by Onsemi is a Motion Control IC with 20 terminals, operating voltage of 6.5-29V, and max output current of 0.8A. Ideal for automotive applications due to its temp range of -40 to 125°C and stepper motor controller type, it offers precise control in compact design.
Median Price
$3.524
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Chip Stock
Vyrian
VNN
Digiode
Corohmni
$3.279
Argo Parts USA
Continental Prestige Electronics
$3.213
Semicontronic
$3.500
$3.412
$3.395
Netroflash
Ampacity Inc.
$6.500
AZTECH Wire
$8.889
Advanced Electronics
$18.675
$16.994
$15.314
Aztec Data Supply Inc.
$23.620
Component Stockers USA
$99.990
TANS Electronics
Kulean Microsystems
Lixinc
SupplyDigital Components
Corphita
Perfect Parts
UHIMA Technologies
Problanco Electronics
This material is lightweight and durable, making the product suitable for a variety of applications while also being cost-effective.
Surface mount technology allows for easy installation and integration onto circuit boards, saving time and space in electronic designs.
Stable supply voltage ensures consistent performance and reliability of the motion control IC.
With a high maximum operating temperature, this product can withstand harsh environmental conditions without compromising functionality.
The high output current capability allows for driving a variety of loads and motors, making this product versatile for different applications.
Motion Control ICs AMIS30622C6227G attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
AMIS30622C6227G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 10/Mar/2021 Mult Dev EOL 30/Jun/2020
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1552200168
Molex
WIRE AND CABLE;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
87832-1420
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Micro Commercial Components
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
Panjit International
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
Taitron Components
TLE4209GXUMA2
Infineon Technologies
TLE4209GXUMA2 by Infineon is a Motion Control IC for brush DC motors. It operates at 8-18V with a max output current of 0.9A. With a small outline package and gull wing terminals, it's ideal for compact applications requiring precise motor control.
DRV8837DSGR
Texas Instruments
DRV8837DSGR by Texas Instruments is a motion control IC with 8 terminals and a supply voltage range of 1.8V to 7V. It offers a max output current of 1.8A, operates in industrial temperature grade (-40°C to 85°C), and is suitable for brush DC motor control applications due to its compact square package design and surface-mount capability.
IKCM15H60GAXKMA2
Infineon's IKCM15H60GAXKMA2 is a Motion Control IC with 24 terminals, operating voltage range of 14.5V to 18.5V, and max output current of 24A. Ideal for automotive applications due to its temp range of -40°C to 125°C and AC motor control capabilities in a compact rectangular package.
AMIS30622C6227G
Onsemi
LV8728MR-AH
LV8728MR-AH by Onsemi is a Motion Control IC with 30 terminals, operating voltage range of 9-32V. It offers 2A output current, suitable for Stepper Motor control applications. With compact dimensions (15.2mm x 7.9mm x 2.45mm), it can operate in temperatures from -30°C to 85°C efficiently.
DRV8880PWPR
DRV8880PWPR by Texas Instruments is a motion control IC with a supply voltage range of 6.5-45V and max output current of 2.5A. It features a small outline package, suitable for automotive applications, with operating temperatures from -40 to 125°C. This stepper motor controller has 28 terminals and is surface mountable, making it ideal for compact designs requiring precise motion control.
BD6230F-E2
ROHM
ROHM's BD6230F-E2 is a Motion Control IC with 24V supply voltage, 0.5A output current, and 8 terminals. Ideal for BRUSH DC MOTOR CONTROL applications in industrial settings. Package: PLASTIC/EPOXY, Surface Mount: YES, Operating Temp: -40 to 85 °C.
TMC2160A-TA
Trinamic Motion Control & Kg
TMC2160A-TA by Trinamic is a Motion Control IC with 48 terminals, operating voltage range of 10-50V, and temp. range of -40 to 125°C. Ideal for automotive applications, this stepper motor controller features a flatpack package style and matte tin terminal finish.
DRV8833PWPR
DRV8833PWPR by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage of 2.7-10.8V, and max output current of 2A. Ideal for brush DC motor control applications due to its compact size, industrial temperature grade, and surface-mount package design.
FSB50450BL
The Onsemi FSB50450BL is a Motion Control IC with 23 terminals, operating voltage range of 13.5V to 16.5V, and max output current of 5A. It is designed for AC motor control applications in automotive environments, featuring a hybrid technology package style suitable for temperatures from -40°C to 150°C.
PDRV8874PWPR
The Texas Instruments PDRV8874PWPR is a Motion Control IC with 24V nominal voltage, 6A max output current, and -40 to 125°C operating temperature range. Ideal for automotive applications, this IC features a small outline package with gull wing terminals for surface mount assembly.
ADS1259QPWRQ1
Texas Instruments ADS1259QPWRQ1 is a Motion Control IC with 20 terminals, operating b/w -40 to 125°C. It has a supply voltage range of 4.75V to 5.25V and is ideal for automotive applications requiring precise control over brush DC motors.
L6207D
STMicroelectronics
L6207D by STMicroelectronics is a Motion Control IC with 24 terminals, operating voltage of 8-52V, and max output current of 2.8A. Ideal for automotive applications, this BCDMOS technology-based Stepper Motor Controller offers dual terminal position in a small outline package.
A3983SLPTR-T
Allegro MicroSystems
Allegro MicroSystems' A3983SLPTR-T is a Motion Control IC with 24 terminals, operating at -20 to 85°C. It supports stepper motor control, offering a max output current of 2A at supply voltages ranging from 3V to 5.5V. The compact rectangular package style with gull wing terminals makes it suitable for applications requiring precise motion control in tight spaces.
LB11696V-TLM-E
LB11696V-TLM-E by Onsemi is a Motion Control IC with 30 terminals, operating at -20 to 100°C. It has a supply voltage range of 8-17 V and can handle a max output current of 0.03 A. Ideal for Brushless DC Motor Controllers, this IC is compact (9.75x5.6 mm) and surface-mountable for various motion control applications.
PDRV8343SPHPRQ1
PDRV8343SPHPRQ1 by Texas Instruments is a Motion Control IC for automotive applications. It operates at a supply voltage range of 5.5V to 50V with AEC-Q100 screening and can handle temperatures from -40°C to 125°C. This IC features a flatpack package style, gull wing terminals, and quad terminal position for robust brushless DC motor control in compact designs.
IRMCF341TY
Infineon's IRMCF341TY is a Motion Control IC with 64 terminals, operating at 3.3V. It features a low profile flatpack package, suitable for AC motor control applications in industrial settings. With a temperature range of -40 to 85°C and compact dimensions of 10x10mm, it offers precise control in various environments.
L6506
STMicroelectronics L6506 is a Motion Control IC with 18 terminals, operating at 5V. It features a max supply current of 25mA and supports stepper motor control applications. The IC has a rectangular package style, with a width of 7.62mm and terminal pitch of 2.54mm, suitable for commercial temperature grade environments.
DRV8818PWPR
DRV8818PWPR by Texas Instruments is a Motion Control IC with 28 terminals and a supply voltage range of 3-35V. It features a max output current of 2.5A, suitable for Stepper Motor Controllers in industrial applications. The package style is small outline with heat sink, ideal for compact designs requiring precise motion control.
DRV8434PWPR
DRV8434PWPR by Texas Instruments is a Motion Control IC with 28 terminals and a supply voltage range of 4.5V to 48V. It features a max output current of 2.5A, operating temperature from -40°C to 125°C, and is ideal for stepper motor control applications due to its bipolar technology and compact rectangular package design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AMIS30624C6244G
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AMIS30522C5222RG
AMIS30522C5222RG by Onsemi is a Motion Control IC with 32 terminals, operating voltage range of 6-30V, and max output current of 1.6A. Ideal for automotive applications due to its compact size, low power consumption, and high temperature tolerance up to 125°C.
AMIS30624C6245RG
AMIS30624C6245RG by Onsemi is a Motion Control IC with 32 terminals and a nominal voltage of 12V. It operates in temperatures ranging from -40 to 125 °C and supports power supplies of 5,6.5/29V. Ideal for automotive applications, it features a max output current of 0.8A for stepper motor control.
AMIS30543C5431RG
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
AMIS30532C53212G
AMIS-30521ANA
STEPPER MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
AMIS30532C5321RG
AMIS30542C54212G
AMIS30421C4211RG
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 44; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
AMIS30511
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AMIS30521C5212RG
AMIS30523C5231RG
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 52; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
AMIS30512C5122RG
AMIS30532C5321G
AMIS30422C422MNTWG
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
AMIS-30522ANA
AMIS30512
AMIS30522C5222G
AMIS30521C5212G
AMIS-30622
Ami Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved