Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LV8735V-MPB-H by Onsemi is a Motion Control IC with 24V supply voltage, 1.5A output current, and BCDMOS technology. Ideal for stepper motor control applications in industrial settings due to its compact size, dual terminal position, and wide operating temperature range from -40°C to 85°C.
Median Price
$1.952
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$1.840
1k+ parts
$1.650
10k+ parts
$1.550
DigiKey
$2.420
Verical
$2.063
$1.938
Arrow
Chip1Stop
$0.006
Nova Conductors
Digiode
$1.957
Vyrian
Semicontronic
$0.005
Corohmni
Ampacity Inc.
$0.011
Argo Parts USA
Continental Prestige Electronics
$1.803
Corphita
$1.854
Kulean Microsystems
TANS Electronics
Problanco Electronics
UHIMA Technologies
Microchip USA
SupplyDigital Components
Perfect Parts
Netroflash
$1.748
$1.711
Durable and cost-effective material choice for packaging, providing protection to the internal components.
Ideal voltage for efficient performance and compatibility with various applications.
Wide range of operating temperature allows the product to function in harsh environmental conditions.
Capable of delivering sufficient current for driving motors and other components effectively.
Utilizes BCDMOS technology for power efficiency and integration of bipolar, CMOS, and DMOS technologies.
Motion Control ICs LV8735V-MPB-H attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LV8735V-MPB-H Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDLL4148
Fairchild Semiconductor
1N4148
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
Taiwan Semiconductor
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
Transys Electronics
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DRV8212DSGR
DRV8212DSGR by Texas Instruments is a Motion Control IC with 8 terminals, operating voltage range of 1.65V to 5.5V, and max output current of 4A. This small outline IC is ideal for automotive applications due to its wide temperature range (-40°C to 125°C) and dual terminal position design. With surface mount capability and compact dimensions (2mm x 2mm), it offers efficient brush DC motor control in various automotive systems.
MC33926AESR2
NXP Semiconductors
MC33926AESR2 by NXP Semiconductors is a Motion Control IC with 28 terminals, supporting supply voltage from 5V to 28V. It features a max output current of 5A and operates in temperatures ranging from -40°C to 125°C. Ideal for brush DC motor control applications due to its SMARTMOS technology and AEC-Q100 screening level.
A3977SLP-T
Allegro MicroSystems
Allegro MicroSystems' A3977SLP-T is a Motion Control IC with 28 terminals, operating voltage of 3-5.5V, and max output current of 2.5A. Ideal for stepper motor control applications due to its compact size, NMOS technology, and peak reflow temp of 260°C.
VNH5019ATR-E
STMicroelectronics
VNH5019ATR-E by STMicroelectronics is a Motion Control IC with 30 terminals, operating voltage range of 5.5-24V, and max output current of 30A. Ideal for brush DC motor control applications due to its compact size, dual terminal position, and wide temperature range (-40 to 150°C).
DRV2603RUNR
DRV2603RUNR by Texas Instruments is a Motion Control IC with 10 terminals, operating voltage range of 2.5V to 5.2V, and peak reflow temperature of 260°C. Ideal for brush DC motor control applications due to its compact square package shape and very thin profile chip carrier style. Operating in industrial temperatures from -40°C to 85°C, it offers precise vibration feedback control.
DRV8350RHRGZR
DRV8350RHRGZR by Texas Instruments is a Motion Control IC with 48 terminals, operating voltage range of 9-75V, and max output current of 1A. Ideal for automotive applications, it features a temp range of -40 to 125°C and terminal finish of Ni/Pd/Au/Ag.
FNA22512A
FNA22512A by Onsemi is a Motion Control IC with 34 terminals and a nominal voltage range of 14-16.5 V. It features a max output current of 50 A, making it suitable for AC motor control applications. The package style is MICROELECTRONIC ASSEMBLY in RECTANGULAR shape, with dimensions of 80mm x 33mm x 8.1mm (LxWxH).
A3959SLB-T
Allegro MicroSystems' A3959SLB-T is a Motion Control IC with 24 terminals, operating voltage of 4.5-5.5V, and output current of 0.006A. Ideal for stepper motor control applications due to its compact rectangular package style and dual terminal position. With a temperature range of -20 to 85°C, it offers reliable performance in various environments.
DRV8320RSRHAT
Texas Instruments DRV8320RSRHAT is a Motion Control IC with 40 terminals, operating voltage range of 6-60V. Ideal for automotive applications, it offers max output current of 1A, temp range -40 to 125°C, and compact square package design.
MC34931SEK
Freescale Semiconductor
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
L293B
Sgs-ates Componenti Electronici S P A
Motion Control Electronics; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Pitch: 2.54 mm;
A5979GLPTR-T
Allegro MicroSystems' A5979GLPTR-T is a Motion Control IC with 28 terminals, operating temperature range of -40 to 105°C. It's a Stepper Motor Controller with max output current of 2.8A, suitable for industrial applications requiring precise motion control in compact spaces.
A5977GLPTR-T
Allegro MicroSystems' A5977GLPTR-T is a Motion Control IC with 28 terminals, operating temperature range of -40 to 105°C. It's a Stepper Motor Controller with max output current of 2.8A, suitable for industrial applications requiring precise motion control in compact spaces.
IKCM10H60GAXKMA1
Infineon Technologies
IKCM10H60GAXKMA1 by Infineon Technologies is a Motion Control IC with 24 terminals, operating voltage range of 14.5V to 18.5V, and max output current of 16A. This AC motor controller has a temp range of -40°C to 100°C, making it suitable for industrial applications requiring precise motion control in compact spaces.
A3982SLBTR-T
Allegro MicroSystems' A3982SLBTR-T is a motion control IC with 24 terminals, operating at -20 to 85°C. It features a max output current of 2A and supports stepper motor control applications. The IC has a small outline package style, measures 15.4mm in length, and operates on power supplies of 3.3/5V.
L6234PD013TR
STMicroelectronics L6234PD013TR is a Motion Control IC with 42V supply voltage, suitable for automotive applications. It features a max output current of 5A and operates in temperatures ranging from -40 to 125°C. The IC is designed for brushless DC motor control, with a small outline package style ideal for surface mount assembly.
NFVA23512NP2T
NFVA23512NP2T by Onsemi is a Motion Control IC with 600V Vsup, 70A max output current, and -40 to 125°C operating temp range. Ideal for AC motor control in automotive applications due to its hybrid technology and 34 terminals in a rectangular package.
TC648VPA
Telcom Semiconductor
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
FSB50250S
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-30 Code: R-XDMA-G23; Maximum Supply Voltage (Vsup): 16.5 V;
IRMCF343TY
The Infineon Technologies IRMCF343TY is a Motion Control IC with 64 terminals, operating at a supply voltage range of 3-3.6V. It features a low profile flatpack package style suitable for AC motor control applications in industrial environments, with a temperature range of -40 to 85°C. The IC is surface mountable and has a compact square shape measuring 10x10mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LV8728MR-AH
LV8728MR-AH by Onsemi is a Motion Control IC with 30 terminals, operating voltage range of 9-32V. It offers 2A output current, suitable for Stepper Motor control applications. With compact dimensions (15.2mm x 7.9mm x 2.45mm), it can operate in temperatures from -30°C to 85°C efficiently.
LV8732V-TLM-H
LV8732V-TLM-H by Onsemi is a Motion Control IC with 24V supply voltage, 2.5A output current, and BCDMOS technology. Ideal for stepper motor control applications due to its small outline package and dual terminal position. Operating temperature range from -20°C to 85°C makes it versatile for various environments.
LV8746V-TLM-E
LV8746V-TLM-E by Onsemi is a Motion Control IC with 44 terminals, operating voltage range of 9-24 V. It features a max output current of 1.2 A and operates in temperatures from -20 to 85°C. Ideal for stepper motor control applications due to its compact size and advanced BICMOS technology.
LV8761V-TLM-E
LV8761V-TLM-E by Onsemi is a Motion Control IC with 36 terminals, operating at -20 to 85°C. It has a power supply of 5,24V and uses BICMOS technology. Ideal for applications requiring precise motion control in compact designs.
LV8760T-TLM-E
BRUSH DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8713T-TLM-H
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8761V-MPB-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 36; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8734V-MPB-H
STEPPER MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 44; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8771VH-TLM-H
LV8771VH-TLM-H by Onsemi is a Motion Control IC with 24V supply, 28 terminals, and BICMOS technology. It operates b/w -20 to 85°C, has a peak reflow temp of 260°C, and low supply current of 3mA. Ideal for applications requiring precise motion control in various industries.
LV8735V-MPB-H
Sanyo Semiconductor
LV8772-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 28; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LV8713T-MPB-H
LV8713T-MPB-H by Onsemi is a motion control IC with 24 terminals and power supplies of 3.3V and 12V. It operates in temperatures ranging from -20°C to 85°C and has a max supply current of 1.7mA. This IC is suitable for applications requiring precise motion control in various industries.
LV8716QA-MH
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LV8712T
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8726TA-NH
STEPPER MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; Surface Mount: YES;
LV8727
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 25; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LV8702V-TLM-H
LV8712T-MPB-H
LV8727-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 25; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LV8735V-TLM-H
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved