Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LV8771VH-TLM-H by Onsemi is a Motion Control IC with 24V supply, 28 terminals, and BICMOS technology. It operates b/w -20 to 85°C, has a peak reflow temp of 260°C, and low supply current of 3mA. Ideal for applications requiring precise motion control in various industries.
Median Price
$1.795
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$7.460
100+ parts
$3.410
1k+ parts
$2.020
10k+ parts
-
Rochester
$1.470
$1.320
$1.240
DigiKey
$1.940
Verical
$1.650
$1.550
Nova Conductors
$1.556
Digiode
$1.558
Bristol Electronics
$3.000
$1.860
$1.500
Chip Stock
Vyrian
DigiKey Marketplace
$1.710
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Corohmni
$1.330
Semicontronic
$1.390
$1.355
$1.348
Ampacity Inc.
Corphita
$1.476
Argo Parts USA
Perfect Parts
SupplyDigital Components
Problanco Electronics
Authorized Procurement Solutions
GreenTree Electronics
Continental Prestige Electronics
Kulean Microsystems
Microchip USA
TANS Electronics
UHIMA Technologies
Netroflash
$1.525
$1.478
$1.447
This material provides durability and protection for the internal components, making it a reliable choice for long-term use.
This feature allows for easy and efficient installation onto circuit boards, saving time and effort during assembly.
The 24V supply voltage ensures consistent and reliable power delivery, making this product suitable for a variety of applications.
With a power supply of 24V, this product can handle demanding tasks and operate efficiently under heavy loads.
The ample number of terminals allow for versatile connections and configurations, enabling complex motion control systems.
The high operating temperature tolerance of 85°C ensures stable performance in harsh environments or under heavy use.
The low minimum operating temperature of -20°C allows for reliable operation in cold conditions without compromising performance.
The tin bismuth terminal finish provides a robust connection that resists corrosion and ensures long-lasting conductivity.
This short time at peak reflow temperature protects the components from heat damage during assembly, ensuring product integrity.
The high peak reflow temperature tolerance of 260°C enables secure soldering during manufacturing, ensuring a strong and reliable connection.
The low supply current of 3mA ensures efficient power consumption, making this product energy-efficient and cost-effective.
The use of BICMOS technology combines the advantages of both bipolar and CMOS technologies, offering high-speed performance and low power consumption.
With an MSL of 3, this product can withstand moderate moisture exposure, making it suitable for a range of environments and applications.
Motion Control ICs LV8771VH-TLM-H attributes and parameters. Explore more Motion Control ICs devices from Onsemi
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Sub-Category:
Maximum Supply Current (Isup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Maximum Time At Peak Reflow Temperature (s):
LV8771VH-TLM-H Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
Changzhou Galaxy Century Microelectronics
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
Weitronic Enterprise
DRV8847PWR
DRV8847PWR by Texas Instruments is a motion control IC with a nominal voltage of 12V, suitable for automotive applications. It features a small outline package with dual terminals and can operate in temperatures ranging from -40 to 125°C. With a min supply voltage of 2.7V, this stepper motor controller is ideal for compact designs requiring precise motion control.
NFVA35065L32
NFVA35065L32 by Onsemi is a Motion Control IC with 27 terminals, 300V nominal voltage, and 100A max output current. It's an AC motor controller in rectangular package style for applications requiring high voltage and current control.
DRV8703QRHBRQ1
DRV8703QRHBRQ1 by Texas Instruments is a Motion Control IC with 32 terminals, operating at -40 to 125 °C. It features a supply voltage range of 5.5V to 45V and is ideal for automotive applications requiring precise stepper motor control in compact spaces. The chip carrier package with very thin profile makes it suitable for surface mount assembly.
LV8732V-TLM-H
LV8732V-TLM-H by Onsemi is a Motion Control IC with 24V supply voltage, 2.5A output current, and BCDMOS technology. Ideal for stepper motor control applications due to its small outline package and dual terminal position. Operating temperature range from -20°C to 85°C makes it versatile for various environments.
LB1838M-TLM-E
LB1838M-TLM-E by Onsemi is a Motion Control IC with 14 terminals and a supply voltage of 3V. It operates b/w -20 to 70°C, suitable for commercial applications. This bipolar technology IC has a max supply current of 18mA, making it ideal for surface mount designs in various electronic devices.
TB6568KQ(O,8)
Toshiba
Toshiba's TB6568KQ(O,8) is a BICMOS Motion Control IC with 3A output current. Operating from -40 to 85°C, it supports 10-45V supply voltage for brush DC motor control applications. The IC features a flange mount package style and 7 terminals in a rectangular plastic/epoxy body.
PS21767
Powerex
AC MOTOR CONTROLLER; No. of Terminals: 38; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-XUFM-T38; Terminal Position: UPPER;
L6206QTR
STMicroelectronics
STMicroelectronics L6206QTR is a Motion Control IC with 48 terminals in a square chip carrier package. Operating temperature ranges from -25 to 125 °C, supporting stepper motor control applications. Features DMOS technology, 8-52V supply voltage range, and compact dimensions of 7x7mm for versatile motion control solutions.
VNH7070AYTR
VNH7070AYTR by STMicroelectronics is a Motion Control IC with AEC-Q100 screening. It operates at 4-28V, supporting a max supply current of 6mA. This Brush DC Motor Controller has 36 terminals and is ideal for automotive applications due to its small outline package and dual terminal position.
A3936SED
Allegro MicroSystems
A3936SED by Allegro MicroSystems is a motion control IC with a square package and 44 terminals. It operates at a nominal voltage of 5V and has a max output current of 3A. This IC is commonly used as a brushless DC motor controller.
DRV8320RSRHAT
Texas Instruments DRV8320RSRHAT is a Motion Control IC with 40 terminals, operating voltage range of 6-60V. Ideal for automotive applications, it offers max output current of 1A, temp range -40 to 125°C, and compact square package design.
FSB50450A
Fairchild Semiconductor
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Length: 29 mm; Nominal Supply Voltage (Vsup): 15 V;
DRV8837CDSGR
DRV8837CDSGR by Texas Instruments is a motion control IC with a supply voltage range of 1.8V to 7V and max output current of 1A. It features a small outline package, suitable for industrial applications like brush DC motor control due to its wide operating temperature range (-40°C to 85°C) and compact size (2mm x 2mm).
DRV8824PWPR
DRV8824PWPR by Texas Instruments is a motion control IC with 1.6A max output current, suitable for industrial applications. It operates at -40 to 85°C temperature range and supports a supply voltage of 8.2-45V. With a small outline package style and dual terminal position, it offers precise control for stepper motor systems.
FSB50760SFS
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; No. of Functions: 1; Qualification: Not Qualified;
DRV8424ERGER
DRV8424ERGER by Texas Instruments is a Motion Control IC with 24 terminals, operating at -40 to 125°C. It features a max output current of 2.5A and supports stepper motor control applications. This chip carrier package with a very thin profile is suitable for automotive use, offering a supply voltage range of 0-5.5V.
VNH3ASP30-E
VNH3ASP30-E by STMicroelectronics is a Motion Control IC with 30 terminals, suitable for BRUSH DC MOTOR CONTROL. It operates at 5.5-16 V, providing a max output current of 60 A. The package style is SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH in plastic/epoxy material.
L6235Q
STMicroelectronics L6235Q is a Motion Control IC with 48V supply voltage, suitable for automotive applications. It features a square package shape, BCDMOS technology, and 48 terminals in a chip carrier style. With a temperature range of -40 to 150°C, it offers precise control for brushless DC motor systems.
FNB41060B2
AC MOTOR CONTROLLER; No. of Terminals: 26; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Package Body Material: PLASTIC/EPOXY;
UC3638DW
UC3638DW by Texas Instruments is a Motion Control IC with 20 terminals, operating at -15V to +15V. It features a small outline package, suitable for brush DC motor control applications. With a max output current of 0.5A and bipolar technology, it offers precise control in commercial temperature grades.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LV8728MR-AH
LV8728MR-AH by Onsemi is a Motion Control IC with 30 terminals, operating voltage range of 9-32V. It offers 2A output current, suitable for Stepper Motor control applications. With compact dimensions (15.2mm x 7.9mm x 2.45mm), it can operate in temperatures from -30°C to 85°C efficiently.
LV8746V-TLM-E
LV8746V-TLM-E by Onsemi is a Motion Control IC with 44 terminals, operating voltage range of 9-24 V. It features a max output current of 1.2 A and operates in temperatures from -20 to 85°C. Ideal for stepper motor control applications due to its compact size and advanced BICMOS technology.
LV8761V-TLM-E
LV8761V-TLM-E by Onsemi is a Motion Control IC with 36 terminals, operating at -20 to 85°C. It has a power supply of 5,24V and uses BICMOS technology. Ideal for applications requiring precise motion control in compact designs.
LV8760T-TLM-E
BRUSH DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8713T-TLM-H
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8761V-MPB-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 36; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8734V-MPB-H
STEPPER MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 44; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8735V-MPB-H
Sanyo Semiconductor
LV8772-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 28; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LV8713T-MPB-H
LV8713T-MPB-H by Onsemi is a motion control IC with 24 terminals and power supplies of 3.3V and 12V. It operates in temperatures ranging from -20°C to 85°C and has a max supply current of 1.7mA. This IC is suitable for applications requiring precise motion control in various industries.
LV8716QA-MH
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LV8712T
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8726TA-NH
STEPPER MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; Surface Mount: YES;
LV8727
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 25; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LV8702V-TLM-H
LV8712T-MPB-H
LV8727-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 25; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved