Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LV8732V-TLM-H by Onsemi is a Motion Control IC with 24V supply voltage, 2.5A output current, and BCDMOS technology. Ideal for stepper motor control applications due to its small outline package and dual terminal position. Operating temperature range from -20°C to 85°C makes it versatile for various environments.
Median Price
$3.746
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Farnell
1+ parts
$2.730
100+ parts
$2.390
1k+ parts
$2.000
10k+ parts
$1.630
Rochester
-
$3.330
$2.980
$2.800
DigiKey
$4.380
Verical
$4.162
$3.725
$3.500
TEDSS.com
$1.320
$0.860
Digiode
$2.594
Nova Conductors
$3.578
Chip Stock
Vyrian
ACDS - Activité Composants Distribution Service
Corohmni
Semicontronic
$2.320
$2.262
$2.250
Ampacity Inc.
Corphita
$2.457
Continental Prestige Electronics
Argo Parts USA
$3.460
Aztec Data Supply Inc.
$16.840
Advanced Electronics
$17.275
$15.720
$14.166
Perfect Parts
Problanco Electronics
SupplyDigital Components
A-Z Elektronik GmbH
Lixinc
TANS Electronics
Kulean Microsystems
Alle Elektronik GmbH
Authorized Procurement Solutions
UHIMA Technologies
Microchip USA
The use of plastic/epoxy as the package body material makes the IC lightweight and durable, ideal for applications where weight and protection are important factors.
The nominal supply voltage of 24V allows for compatibility with a wide range of systems and power sources, making the IC versatile and easy to integrate into different setups.
With 44 terminals, this IC offers plenty of connection options, enabling more functionalities and control capabilities in the system it is used in.
The high maximum output current of 2.5A allows the IC to drive larger loads efficiently, making it suitable for applications that require high-power output.
The BCDMOS technology used in this IC provides a good balance between performance, power efficiency, and cost-effectiveness, making it a reliable choice for motion control applications.
Motion Control ICs LV8732V-TLM-H attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LV8732V-TLM-H Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 19/Dec/2017 Mult Dev EOL 7/Apr/2021 Mult Dev EOL Retraction 15/Jun/2018
PCN Design/Specification - Copper Wire Conversion/Mold Compound Chg 7/Dec/2015 Qual Vehicle Corr 14/Jan/2016
PCN Assembly/Origin - LV873yyy Wafer Chg 26/Sep/2018
PCN Packaging - Inner Box Update 24/Apr/2015
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
Surge Components
Micro Commercial Components
1N4148W-T
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Baneasa S A
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
Protek Devices
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
AMIS30624C6244G
Onsemi
AMIS30624C6244G by Onsemi is a Motion Control IC with 20 terminals, operating voltage of 8-29V, and max output current of 0.8A. Ideal for automotive applications due to its temp range of -40 to 125°C and stepper motor control capabilities.
TMC262-LA
Microsemi
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
IRMCF343TY
Infineon Technologies
The Infineon Technologies IRMCF343TY is a Motion Control IC with 64 terminals, operating at a supply voltage range of 3-3.6V. It features a low profile flatpack package style suitable for AC motor control applications in industrial environments, with a temperature range of -40 to 85°C. The IC is surface mountable and has a compact square shape measuring 10x10mm.
STSPIN240
STMicroelectronics
STSPIN240 by STMicroelectronics is a Motion Control IC with 16 terminals, operating voltage range of 1.8V to 10V. It comes in a square chip carrier package style suitable for brush DC motor control applications. The compact design with a seated height of 1mm and terminal pitch of 0.5mm makes it ideal for space-constrained projects.
TC655EUN
Microchip Technology
TC655EUN by Microchip Technology is a Motion Control IC with a nominal voltage of 5V and power supplies of 3.3/5V. It is a Brushless DC Motor Controller in a small outline, thin profile package suitable for industrial applications. With dual terminal position, matte tin finish, and peak reflow temperature of 260°C, it offers precise control in a compact design.
TMC261C-PA-T
Maxim Integrated
STEPPER MOTOR CONTROLLER; No. of Terminals: 44; Package Code: LFQFP; Package Shape: SQUARE; Surface Mount: YES; Additional Features: it also has 2k ESD wrt application handling;
FNA23512A
AC MOTOR CONTROLLER; No. of Terminals: 34; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Nominal Supply Voltage (Vsup): 15 V;
STSPIN220
STSPIN220 by STMicroelectronics is a motion control IC with 1 function. It has a square package shape, 16 terminals, and a nominal voltage of 5V. This stepper motor controller is suitable for applications requiring precise motion control in compact spaces.
DRV8320SRTVR
DRV8320SRTVR by Texas Instruments is a Motion Control IC with 32 terminals, operating voltage range of 6-60V, and max output current of 1A. Ideal for automotive applications, it features a temp range of -40 to 125°C and package style in CHIP CARRIER form.
FNB41060
FNB41060 by Onsemi is a motion control IC with 1 function. It operates at a nominal voltage of 15V and has a max output current of 15A. This IC is commonly used as an AC motor controller in various applications.
FSBB20CH60C
FSBB20CH60C by Onsemi is a Motion Control IC with 1 function, operating at 13.5-16.5V. It features a max output current of 40A and comes in a rectangular package with 27 terminals. Ideal for AC motor control applications due to its dual terminal position and matte tin finish.
DRV8350SRTVT
DRV8350SRTVT by Texas Instruments is a Motion Control IC with 32 terminals, operating voltage range of 9-75V, and max output current of 1A. It is ideal for automotive applications due to its high temp grade (125°C), compact size (5x5mm), and brushless DC motor control capabilities.
DRV8434ARGER
DRV8434ARGER by Texas Instruments is a Motion Control IC with 24V nominal voltage and 2.5A max output current. It features a compact square package shape, suitable for automotive applications, with a wide operating temperature range from -40 to 125°C. This stepper motor controller has a surface-mount design and quad terminal position for efficient integration in various systems.
SLA7076MPRT
Sanken Electric
STEPPER MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: ZIG-ZAG; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
TLE5205-2GP
Siemens
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 20; Package Shape: RECTANGULAR; Surface Mount: YES; Minimum Supply Voltage (Vsup): 5 V; Qualification: Not Qualified;
L6235D013TR
L6235D013TR by STMicroelectronics is a motion control IC with a nominal voltage of 48V. It is a brushless DC motor controller with a max output current of 5.6A. This IC is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
L6506D
L6506D by STMicroelectronics is a Motion Control IC with 20 terminals, operating voltage of 5V, and small outline package. Ideal for stepper motor control applications, it has a temperature range of 0-70°C and uses bipolar technology. With surface mount capability and compact dimensions (12.8mm x 7.5mm x 2.65mm), it offers precise motion control in various commercial settings.
STK681-332-E
Sanyo Electric
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 19; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Package Body Material: UNSPECIFIED;
FSBB20CH60F
FSBB20CH60F by Onsemi is a 27-terminal AC motor controller IC with a max output current of 40A. Operating voltage range from 13.5V to 16.5V, ideal for motion control applications. Utilizes hybrid technology in rectangular package style for efficient power management.
TLE5206-2S
TLE5206-2S by Infineon is a BRUSH DC MOTOR CONTROLLER with 6A output current and 40V max supply voltage. It operates b/w 0-70°C, suitable for motion control applications. The IC features BCDMOS technology, matte tin terminal finish, and flange mount package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LV8728MR-AH
LV8728MR-AH by Onsemi is a Motion Control IC with 30 terminals, operating voltage range of 9-32V. It offers 2A output current, suitable for Stepper Motor control applications. With compact dimensions (15.2mm x 7.9mm x 2.45mm), it can operate in temperatures from -30°C to 85°C efficiently.
LV8746V-TLM-E
LV8746V-TLM-E by Onsemi is a Motion Control IC with 44 terminals, operating voltage range of 9-24 V. It features a max output current of 1.2 A and operates in temperatures from -20 to 85°C. Ideal for stepper motor control applications due to its compact size and advanced BICMOS technology.
LV8761V-TLM-E
LV8761V-TLM-E by Onsemi is a Motion Control IC with 36 terminals, operating at -20 to 85°C. It has a power supply of 5,24V and uses BICMOS technology. Ideal for applications requiring precise motion control in compact designs.
LV8760T-TLM-E
BRUSH DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8713T-TLM-H
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8761V-MPB-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 36; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8734V-MPB-H
STEPPER MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 44; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8771VH-TLM-H
LV8771VH-TLM-H by Onsemi is a Motion Control IC with 24V supply, 28 terminals, and BICMOS technology. It operates b/w -20 to 85°C, has a peak reflow temp of 260°C, and low supply current of 3mA. Ideal for applications requiring precise motion control in various industries.
LV8735V-MPB-H
Sanyo Semiconductor
LV8772-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 28; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LV8713T-MPB-H
LV8713T-MPB-H by Onsemi is a motion control IC with 24 terminals and power supplies of 3.3V and 12V. It operates in temperatures ranging from -20°C to 85°C and has a max supply current of 1.7mA. This IC is suitable for applications requiring precise motion control in various industries.
LV8716QA-MH
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
LV8712T
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8726TA-NH
STEPPER MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE; Surface Mount: YES;
LV8727
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 25; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LV8702V-TLM-H
LV8712T-MPB-H
LV8727-E
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 25; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LV8732V
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 44; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved