Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV7535DBR2G by Onsemi is a Motion Control IC with 20 terminals, operating at a nominal voltage of 5V. It features a small outline package style and is designed for brush DC motor control applications. The IC has a max seated height of 1.1mm and can withstand peak reflow temperatures up to 260°C.
Median Price
$2.580
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$1.570
1k+ parts
$1.350
10k+ parts
$1.240
Chip1Stop
$8.830
$3.530
$2.310
-
DigiKey
$1.276
Nova Conductors
$1.456
Digiode
$3.021
Chip Stock
NAC Semi
Vyrian
ComSIT Distribution GmbH
Vigor
Corohmni
$1.427
Continental Prestige Electronics
Argo Parts USA
Netroflash
$1.383
$1.354
Ampacity Inc.
$2.700
Corphita
$2.862
Aztec Data Supply Inc.
$7.800
Microchip USA
$8.790
RC Electronics
Lixinc
Authorized Procurement Solutions
TANS Electronics
Kulean Microsystems
Futuretech Components
SupplyDigital Components
iodParts Technologies Inc.
UHIMA Technologies
Problanco Electronics
Plastic/Epoxy material provides durability and protection for the IC, making it suitable for various industrial applications.
Surface mount capability allows for easy and efficient integration of the IC onto circuit boards, saving space and simplifying the manufacturing process.
A stable 5V supply voltage ensures reliable and consistent performance of the IC in different operating conditions.
Having 20 terminals provides flexibility in connecting the IC to other components, enabling versatile control options for motion applications.
Nickel Palladium Gold terminal finish offers excellent conductivity and corrosion resistance, ensuring optimal signal transmission and long-term reliability.
Low seated height allows for compact designs and efficient use of space in tight PCB layouts.
With a peak reflow temperature of 260°C, the IC can withstand high-temperature soldering processes, ensuring robust assembly and connection to the PCB.
MSL 3 rating indicates that the IC has moderate sensitivity to moisture, making it suitable for typical storage and handling conditions in manufacturing environments.
Motion Control ICs NCV7535DBR2G attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
NCV7535DBR2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - NCV7535 14/Feb/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
Comchip Technology
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
SPC TECHNOLOGY/ MULTICOMP
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS84-7-F
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
Plessey Semiconductors Discrete Components Div
Continental Device India
Toshiba
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
TMC5160A-TA-T
Trinamic Motion Control & Kg
TMC5160A-TA-T by Trinamic is a Motion Control IC with 48 terminals, operating voltage range of 10-50V. Ideal for automotive applications, it has a temperature range of -40 to 125°C and supports stepper motor control.
A4984SLPTR-T
Allegro MicroSystems
A4984SLPTR-T by Allegro MicroSystems is a motion control IC with a supply voltage range of 3V to 5.5V and max output current of 2A. It is commonly used as a stepper motor controller in various applications.
VNH5019ATR-E
STMicroelectronics
VNH5019ATR-E by STMicroelectronics is a Motion Control IC with 30 terminals, operating voltage range of 5.5-24V, and max output current of 30A. Ideal for brush DC motor control applications due to its compact size, dual terminal position, and wide temperature range (-40 to 150°C).
TMC2660C-PA
TMC2660C-PA by Trinamic is a Motion Control IC with 44 terminals, operating voltage range of 5-29V, and max output current of 7A. Ideal for automotive applications due to its temp grade and CMOS technology, it's a stepper motor controller in a square package suitable for surface mount assembly.
DRV8833RTYR
Texas Instruments
Texas Instruments' DRV8833RTYR is a Motion Control IC with 16 terminals and a supply voltage range of 2.7V to 10.8V. It offers a max output current of 2A, operates in industrial temperatures (-40 to 85°C), and is ideal for brush DC motor control applications.
DRV8814PWPR
DRV8814PWPR by Texas Instruments is a Motion Control IC with Vsup ranging from 8V to 45V. It features a small outline package, dual terminal position, and industrial temperature grade suitable for brush DC motor control applications. With a max operating temperature of 85°C and compact dimensions of 9.7mm x 4.4mm x 1.2mm, it offers efficient power management in various industrial settings.
TC664EUNTR
Microchip Technology
Microchip TC664EUNTR is a Motion Control IC with 10 terminals, operating voltage of 3-5V. Ideal for Brushless DC Motor control applications. Features include small outline package, industrial temperature grade, and dual terminal position.
IRAMS06UP60B-2
Infineon Technologies
Infineon's IRAMS06UP60B-2 is a Motion Control IC with 15V nominal voltage, 9A max output current, and 20V max supply voltage. It's an AC motor controller in rectangular package style for various motion control applications.
DRV8838DSGT
DRV8838DSGT by Texas Instruments is a Motion Control IC with 1.8A max output current, suitable for brush DC motor control applications. It operates b/w -40 to 85°C, with a supply voltage range of 1.8V to 7V. This small outline IC has a dual terminal position and nickel/palladium/gold finish.
MC33886PVW/R2
Freescale Semiconductor
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSBB20CH60CL
Fairchild Semiconductor
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): FLANGE MOUNT;
DRV8307RHAT
DRV8307RHAT by Texas Instruments is a Motion Control IC with 40 terminals in a square package. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 8.5-32V and max current of 18mA, it serves as a Brushless DC Motor Controller in compact dimensions (6x6mm).
LM629M-6/NOPB
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC33035PG
MC33035PG by Onsemi is a 24-terminal motion control IC with a supply voltage range of 10-30V. It operates in industrial temperatures (-40 to 85°C) and controls brushless DC motors with a max output current of 0.1A. The rectangular plastic/epoxy package has dimensions of 31.69mm x 7.62mm x 4.44mm, making it suitable for various motor control applications.
LB1830MC-AH
LB1830MC-AH by Onsemi is a Motion Control IC with 10 terminals, operating voltage of 3-9V. It features a max output current of 0.5A and operates b/w -20 to 80°C. Ideal for brush DC motor control applications due to its small outline package and bipolar technology.
STGIPN3H60AT
STGIPN3H60AT by STMicroelectronics is a Motion Control IC with 26 terminals, operating voltage range of 12-17V. It features Zig-Zag terminal position, -40 to 125°C temperature range, and is ideal for AC motor control applications in automotive settings.
DRV8323HRTAR
DRV8323HRTAR by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 6-60V, and max output current of 1A. Ideal for automotive applications, it features a temp range of -40 to 125°C and package style in CHIP CARRIER form.
MC33035DWR2
Motorola
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX6651EEE-T
MAX6651EEE-T by Maxim Integrated is a Motion Control IC with 16 terminals, operating at -40 to 85°C. It has a supply voltage range of 3-5V and output current of 0.1A. Ideal for industrial applications requiring brushless DC motor control in compact spaces.
TMC2300-LA-T
STEPPER MOTOR CONTROLLER; No. of Terminals: 30; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Minimum Operating Temperature: -40 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV7708FDWR2G
NCV7708FDWR2G by Onsemi is a Motion Control IC with 28 terminals, operating at 3.3V to 5.25V. It features a max output current of 2A and is designed for stepper motor control applications. This small outline package has a rectangular shape, matte tin finish, and gull wing terminal form.
NCV7720DQAR2G
NCV7720DQAR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It has a supply voltage range of 3.15-5.25 V and output current of 0.55 A, suitable for automotive applications like brush DC motor control due to its AEC-Q100 screening level.
NCV7708BDWR2G
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV70627DQ001R2G
STEPPER MOTOR CONTROLLER; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Pitch: .5 mm;
NCV7724DQBR2G
BRUSH DC MOTOR CONTROLLER;
NCV70627DQ002AR2G
STEPPER MOTOR CONTROLLER; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e4;
NCV7725DQBR2G
NCV7725DQBR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 150 °C. It features a supply voltage range of 3.15-5.25 V and output current up to 0.5 A. Ideal for automotive applications due to AEC-Q100 screening level and compact design in small outline package style.
NCV70624DW010R2G
NCV70624DW010R2G by Onsemi is a motion control IC with a rectangular package shape and small outline style. It operates at a nominal voltage of 14V and has a max output current of 0.8A. This IC is commonly used as a stepper motor controller in various applications.
NCV7703BD2R2G
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Pitch: 1.27 mm;
NCV7702BDWR2G
NCV7702BDWR2G by Onsemi is a Motion Control IC with 2 functions, operating at 7-16V. It is a Stepper Motor Controller in a small outline package suitable for automotive applications. With dual terminals and matte tin finish, it can operate b/w -40 to 125°C efficiently.
NCV70514MW003R2G
STEPPER MOTOR CONTROLLER; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Terminal Position: QUAD;
NCV7726DQAR2G
NCV7726DQAR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It features a supply voltage range of 3.15V to 5.25V and supports Brushless DC Motor control applications in automotive environments. The package style is small outline with heat sink, suitable for surface mount assembly with nickel gold palladium terminal finish.
NCV7723DQBR2G
BRUSH DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV70521MN003R2G
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NCV70514MW007G
NCV70522DQ004G
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV70522DQ004R2G
NCV70514MW003BR2G
NCV70514MW007R2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved