Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV7720DQAR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It has a supply voltage range of 3.15-5.25 V and output current of 0.55 A, suitable for automotive applications like brush DC motor control due to its AEC-Q100 screening level.
Median Price
$4.295
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
$4.140
100+ parts
$2.370
1k+ parts
$1.880
10k+ parts
$1.810
DigiKey
$4.230
$2.666
$2.384
$2.314
Mouser Electronics
$2.670
$2.270
$2.220
Newark
$4.360
-
Element14
$5.820
$3.650
$3.470
Chip1Stop
$15.800
$6.490
$4.170
Nova Conductors
$2.980
Digiode
$3.933
Flip Electronics
Formix International
Vyrian
Chip Stock
Cyclops Electronics Ltd
Continental Prestige Electronics
$2.920
Argo Parts USA
Semicontronic
$3.520
$3.432
$3.414
Corphita
$3.726
Aztec Data Supply Inc.
$3.910
Corohmni
Ampacity Inc.
$7.660
Microchip USA
$15.578
Advanced Electronics
$16.458
$15.635
QUARKTWIN TECHNOLOGY LTD
Lixinc
TANS Electronics
Kulean Microsystems
SupplyDigital Components
RC Electronics
Problanco Electronics
Authorized Procurement Solutions
A-Z Elektronik GmbH
Vigor
UHIMA Technologies
Provides a durable and lightweight housing for the IC, ensuring longevity and ease of handling.
Enables easy and efficient PCB assembly, saving time and labor costs.
Meets automotive quality standards, ensuring reliability and performance in harsh operating conditions.
Optimal supply voltage for efficient operation and compatibility with other components.
Suitable for automotive applications where high temperatures may be encountered.
Can operate in extremely cold environments, making it versatile for various applications.
Provides corrosion resistance and ensures reliable electrical connections.
Compact size for space-saving and integration into small electronic devices.
Meets automotive industry standards for reliability and performance in automotive applications.
Capable of driving brush DC motors with a high output current for efficient motor control.
Motion Control ICs NCV7720DQAR2G attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Screening Level:
Maximum Seated Height:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
NCV7720DQAR2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
LM358AN
NXP Semiconductors
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Toshiba
M39029/58-360
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
PDRV8873SPWPRQ1
PDRV8873SPWPRQ1 by Texas Instruments is a Motion Control IC with 24 terminals, operating voltage range of 4.5V to 38V, and temperature grade suitable for automotive applications. It features a small outline package with heat sink, dual terminal position, and can operate in temperatures ranging from -40°C to 125°C. Ideal for brush DC motor control in automotive systems.
A4982SLPTR-T
Allegro MicroSystems
Allegro MicroSystems' A4982SLPTR-T is a Motion Control IC with 24 terminals, operating voltage of 3-5.5V, and max output current of 2A. Ideal for stepper motor control applications due to its compact size, NMOS technology, and peak reflow temp of 260°C.
L6207PD
STMicroelectronics
STMicroelectronics L6207PD is a Motion Control IC with 36 terminals, operating voltage of 8-48V. It's a Stepper Motor Controller in small outline package for automotive applications, supporting max output current of 2.8A at temp range -40 to 150°C.
FSBB15CH60D
Fairchild Semiconductor
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Minimum Supply Voltage (Vsup): 14 V;
TMC223-SI
Trinamic Motion Control & Kg
TMC223-SI by Trinamic is a small outline motion control IC for stepper motors. With 20 terminals, it operates b/w -40 to 125 °C and supports up to 0.8A output current. Ideal for automotive applications due to its matte tin finish and gull wing terminal form.
POWERSTEP01
POWERSTEP01 by STMicroelectronics is a Motion Control IC with 89 terminals, operating at temperatures from -25°C to 125°C. It features a nominal voltage of 3.3V and comes in a rectangular chip carrier package style. Ideal for stepper motor control applications due to its surface mount capability and matte tin terminal finish.
DRV8301DCA
Texas Instruments' DRV8301DCA is a Motion Control IC with 56 terminals, operating at -40 to 125 °C. It supports supply voltages from 6V to 60V and offers a max output current of 1.7A. Ideal for automotive applications, this IC features a small outline package with gull wing terminals and nickel palladium gold finish.
TC648VPA
TC648VPA by Microchip Technology is a Motion Control IC with 8 terminals, operating voltage of 3-5 V, and TS 16949 screening. It is a Brushless DC Motor Controller suitable for applications requiring precise motion control in industrial settings. With a compact rectangular package style and dual terminal position, it offers reliable performance at temperatures ranging from 0 to 85°C.
VNHD7008AYTR
STMicroelectronics' VNHD7008AYTR is a Motion Control IC with 36 terminals, suitable for BRUSH DC MOTOR CONTROL. It operates at 4-28V, delivering up to 51A output current. AEC-Q100 screening ensures reliability in automotive applications.
DRV8350RSRGZT
Texas Instruments' DRV8350RSRGZT is a Motion Control IC with 48 terminals, operating voltage range of 9-75V. Ideal for automotive applications, it offers a max output current of 1A and operates in temperatures ranging from -40 to 125°C. The IC features a compact square package style and surface-mount design for easy integration into various systems.
A3983SLPTR-T
Allegro MicroSystems' A3983SLPTR-T is a Motion Control IC with 24 terminals, operating at -20 to 85°C. It supports stepper motor control, offering a max output current of 2A at supply voltages ranging from 3V to 5.5V. The compact rectangular package style with gull wing terminals makes it suitable for applications requiring precise motion control in tight spaces.
MTS62C19A-HS105
STEPPER MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LA6584M-TLM-H
LA6584M-TLM-H by Onsemi is a motion control IC with 16 terminals, operating voltage of 2.8-12V, and max output current of 1.6A. Ideal for brushless DC motor control applications due to its small outline package and temp range of -30 to 90°C.
SLA7076MPR
Sanken Electric
STEPPER MOTOR CONTROLLER; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: ZIG-ZAG;
VNH2SP30-E
VNH2SP30-E by STMicroelectronics is a Motion Control IC with 30 terminals, supporting 9-16V power supplies. It features a max output current of 30A and operates at a nominal voltage of 9V. Ideal for applications requiring brush DC motor control in compact spaces.
IRAMY20UP60B
Infineon Technologies
Infineon Technologies' IRAMY20UP60B is a 15-20V AC motor controller with 40A output current. Its hybrid technology and zig-zag terminal position make it ideal for motion control applications. The rectangular package style with flange mount and 18 terminals ensure easy integration in various systems.
TLE52062GAUMA1
Infineon's TLE52062GAUMA1 is a BCDMOS Motion Control IC for brush DC motors. It operates at 6-40V with 6A output current, in a small outline package measuring 10x9.25mm. Suitable for various motion control applications requiring precise voltage regulation and high current handling capabilities.
A3966SLBTR
Allegro MicroSystems' A3966SLBTR is a Motion Control IC with 16 terminals, operating voltage of 4.75-5.5V, and max output current of 0.75A. Ideal for stepper motor control applications due to its bipolar technology, small outline package style, and dual terminal position design.
MC33035P
Motorola
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
UC3625DW
Unitrode
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV7708FDWR2G
NCV7708FDWR2G by Onsemi is a Motion Control IC with 28 terminals, operating at 3.3V to 5.25V. It features a max output current of 2A and is designed for stepper motor control applications. This small outline package has a rectangular shape, matte tin finish, and gull wing terminal form.
NCV7708BDWR2G
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV70627DQ001R2G
STEPPER MOTOR CONTROLLER; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Pitch: .5 mm;
NCV7724DQBR2G
BRUSH DC MOTOR CONTROLLER;
NCV70627DQ002AR2G
STEPPER MOTOR CONTROLLER; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e4;
NCV7535DBR2G
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-609 Code: e4;
NCV7725DQBR2G
NCV7725DQBR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 150 °C. It features a supply voltage range of 3.15-5.25 V and output current up to 0.5 A. Ideal for automotive applications due to AEC-Q100 screening level and compact design in small outline package style.
NCV70624DW010R2G
NCV70624DW010R2G by Onsemi is a motion control IC with a rectangular package shape and small outline style. It operates at a nominal voltage of 14V and has a max output current of 0.8A. This IC is commonly used as a stepper motor controller in various applications.
NCV7703BD2R2G
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Pitch: 1.27 mm;
NCV7702BDWR2G
NCV7702BDWR2G by Onsemi is a Motion Control IC with 2 functions, operating at 7-16V. It is a Stepper Motor Controller in a small outline package suitable for automotive applications. With dual terminals and matte tin finish, it can operate b/w -40 to 125°C efficiently.
NCV70514MW003R2G
STEPPER MOTOR CONTROLLER; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Terminal Position: QUAD;
NCV7726DQAR2G
NCV7726DQAR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It features a supply voltage range of 3.15V to 5.25V and supports Brushless DC Motor control applications in automotive environments. The package style is small outline with heat sink, suitable for surface mount assembly with nickel gold palladium terminal finish.
NCV7723DQBR2G
BRUSH DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV70521MN003R2G
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NCV70514MW007G
NCV70522DQ004G
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV70522DQ004R2G
NCV70514MW003BR2G
NCV70514MW007R2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved