Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FSB50550BL by Onsemi is a Motion Control IC with 23 terminals, operating b/w -40 to 125°C. It features a max output current of 7A and supports brushless DC motor control applications. With a package style of MICROELECTRONIC ASSEMBLY, it is designed for automotive use with a nominal voltage range of 13.5V to 16.5V.
Median Price
$4.700
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Farnell
1+ parts
$3.858
100+ parts
-
1k+ parts
10k+ parts
Arrow
$3.967
Mouser Electronics
$4.690
$4.530
Chip1Stop
$4.810
Element14
$9.864
$7.490
$7.276
$6.495
Verical
Rochester
$4.210
$3.960
DigiKey
$3.480
Flip Electronics (Authorized)
Digiode
$3.665
Nova Conductors
$6.710
Chip Stock
Vyrian
Flip Electronics
Ashlea Components Ltd
Continental Prestige Electronics
$3.050
Semicontronic
$3.280
$3.198
$3.182
Ampacity Inc.
Corphita
$3.472
Corohmni
Problanco Electronics
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Authorized Procurement Solutions
Argo Parts USA
UHIMA Technologies
Netroflash
$6.576
$6.375
$6.240
Rectangular package shape allows for efficient use of space on a circuit board.
Optimal supply voltage for stable and efficient operation of the motion control IC.
Sufficient number of terminals for connecting various components in a circuit.
Microelectronic assembly style ensures compact design and reliable performance.
High maximum operating temperature allows the IC to function in demanding environments.
Wide range of operating temperature enables the IC to work in extreme conditions.
Matte tin finish provides good solderability and electrical conductivity.
Dual terminal position allows for flexibility in circuit board layout.
Low maximum seated height helps in keeping the overall profile of the circuit board compact.
Compact width of the IC enables it to be easily integrated into various systems.
Brushless DC motor controller functionality expands the application possibilities of the IC.
Low minimum supply voltage ensures operation even in scenarios with lower power availability.
A moderate length allows for easy placement on a circuit board.
Automotive temperature grade ensures reliability in automotive applications where temperature fluctuations are common.
Low maximum supply current helps in keeping power consumption at a minimum.
High maximum output current capability makes the IC suitable for driving powerful motors.
Hybrid technology combines the advantages of different technologies for optimal performance.
Through-hole terminal form provides secure connections on a circuit board.
High maximum supply voltage range allows for compatibility with various power sources.
Motion Control ICs FSB50550BL attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Position:
Width (mm):
FSB50550BL Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 30/Sep/2022
PCN Assembly/Origin - FDx/FSx/NBCx 30/Jun/2022
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MAX14872ETC+T
Maxim Integrated
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
DRV8886ATRHRR
DRV8886ATRHRR by Texas Instruments is a Motion Control IC with 28 terminals, operating voltage range of 8-37V, and temp. range of -40 to 125°C. Ideal for automotive applications, this IC features a compact rectangular package suitable for surface mount assembly in stepper motor controllers.
PDRV8847PWPR
STEPPER MOTOR CONTROLLER;
DRV8872DDAR
DRV8872DDAR by Texas Instruments is a motion control IC with 8 terminals and a supply voltage range of 6.5V to 45V. It offers a max output current of 3.6A, making it suitable for brush DC motor control applications in automotive environments. With a compact rectangular package style and low profile design, it can operate in temperatures ranging from -40°C to 125°C.
TB67S269FTG
Toshiba
Toshiba's TB67S269FTG is a Motion Control IC with 48 terminals, operating voltage of 4.75-5.25V, and max output current of 2A. Ideal for stepper motor control applications due to BCDMOS technology, quad terminal position, and compact square chip carrier package design.
DRV10974PWPR
Texas Instruments' DRV10974PWPR is a Motion Control IC with 16 terminals, suitable for Brushless DC Motor control. It operates b/w -40 to 125°C, with Vsup ranging from 4.4V to 18V. The small outline package is surface mountable and has a rectangular shape made of plastic/epoxy material.
DRV8302DCA
DRV8302DCA by Texas Instruments is a motion control IC with 56 terminals and a supply voltage range of 6-60V. It operates in temperatures from -40 to 125°C, making it suitable for automotive applications. With a max output current of 1.7A, this brushless DC motor controller comes in a small outline package ideal for surface mounting.
TB6600FG
TB6600FG by Toshiba is a Motion Control IC with 64 terminals, supporting a max output current of 4.5A. Operating b/w -30 to 85°C, it accepts supply voltages from 8V to 42V making it ideal for stepper motor control applications. The package style includes flatpack, heat sink/slug, and thin profile options in a square shape.
TLE94112ELXUMA1
Infineon Technologies
TLE94112ELXUMA1 by Infineon is a Motion Control IC with 24 terminals, operating voltage of 3-5.5V, and max output current of 2A. Ideal for industrial applications like brush DC motor control due to its small size (8.65mm x 3.9mm), low profile design, and temp range of -40 to 85°C.
DRV8889QPWPRQ1
DRV8889QPWPRQ1 by Texas Instruments is a Motion Control IC with 24 terminals, operating voltage range of 4.5V to 45V, and temperature range from -40°C to 125°C. It is designed for automotive applications as a stepper motor controller with surface mount capability in a small outline package.
TMC5160A-WA
Trinamic Motion Control & Kg
TMC5160A-WA by Trinamic is a Motion Control IC with 47 terminals, operating voltage of 10-50V. Ideal for automotive applications, it has a temp range of -40 to 125°C and uses CMOS technology for precise stepper motor control.
A4952ELYTR-T
Allegro MicroSystems
Allegro MicroSystems' A4952ELYTR-T is a Motion Control IC with 8-40V power supplies, suitable for industrial applications. Featuring DMOS technology, it offers 2A max output current and operates in temperatures ranging from -40 to 85°C. This small outline IC with gull wing terminals is designed for brush DC motor control.
UC2625DW
UC2625DW by Texas Instruments is a motion control IC with 12V nominal voltage and 2A max output current. Ideal for brushless DC motor control applications, it features a small outline package style, industrial temperature grade, and surface mount capability. With a wide operating temperature range from -40 to 85°C, this bipolar technology IC offers high performance in various industrial settings.
LMD18245T/NOPB
National Semiconductor
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 15; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
DRV10983PWPR
DRV10983PWPR by Texas Instruments is a Motion Control IC for BLDC motors with 24V nominal voltage, 3A max output current, and 125°C operating temp. Ideal for automotive applications due to its small outline package and dual terminal position.
MC33926AESR2
MC33926AESR2 by NXP Semiconductors is a Motion Control IC with 28 terminals, supporting supply voltage from 5V to 28V. It features a max output current of 5A and operates in temperatures ranging from -40°C to 125°C. Ideal for brush DC motor control applications due to its SMARTMOS technology and AEC-Q100 screening level.
DRV8803PWP
DRV8803PWP by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 8.2V to 24V, and max output current of 0.02A. It is a Stepper Motor Controller suitable for industrial applications due to its compact size, dual terminal position, and high temperature tolerance up to 85°C.
L6472H
STMicroelectronics
STMicroelectronics L6472H is a Motion Control IC with 36V Vsup, 7A max output current, and 45V max supply voltage. Ideal for stepper motor control applications due to its small outline package and dual terminal position.
DRV8871DDAQ1
Texas Instruments DRV8871DDAQ1 is a Motion Control IC with 24V nominal voltage, 3.6A max output current, and AEC-Q100 screening level. Ideal for automotive applications due to its low profile design, operating temperature range of -40 to 125°C, and support for brush DC motor control.
PDRV8908QPWPRQ1
PDRV8908QPWPRQ1 by Texas Instruments is a Motion Control IC with 24 terminals, operating at -40 to 125°C. It features a supply voltage range of 3-5.5V and max current of 5mA, suitable for automotive applications as a Brush DC Motor Controller. The compact rectangular package with gull wing terminals makes it ideal for space-constrained designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FSB50550ASE
Fairchild Semiconductor
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: 5 A; Terminal Form: GULL WING;
Onsemi
FSB50550ASE by Onsemi is a Motion Control IC with 23 terminals, operating at 13.5-16.5V. It has a max output current of 5A and peak reflow temperature of 260°C. Ideal for AC motor control applications due to its compact rectangular package style and matte tin terminal finish.
FSB50450AS
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; No. of Functions: 1;
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Seated Height: 3.5 mm; JESD-30 Code: R-XDMA-G23;
FSB50760SFS
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; No. of Functions: 1; Qualification: Not Qualified;
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-30 Code: R-XDMA-G23; Nominal Supply Voltage (Vsup): 15 V;
FSB50450S
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Moisture Sensitivity Level (MSL): 3; Terminal Finish: Matte Tin (Sn);
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: UNSPECIFIED; Maximum Output Current: 3 A;
FSB50250US
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; No. of Functions: 1; Peak Reflow Temperature (C): 260;
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Moisture Sensitivity Level (MSL): 3; Terminal Finish: MATTE TIN;
FSB52006S
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Form: GULL WING; Qualification: Not Qualified;
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: UNSPECIFIED; JESD-609 Code: e3;
FSB50450A
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Length: 29 mm; Nominal Supply Voltage (Vsup): 15 V;
FSB50450A by Onsemi is a Motion Control IC with 23 terminals, operating at 15V. It features a max output current of 3.9A and is designed for AC motor control applications. With a package style of MICROELECTRONIC ASSEMBLY, it offers a compact solution for precise motion control systems.
FSB50550AS
FSB50550AS by Onsemi is a Motion Control IC with 23 terminals, operating at 15V. It features a max output current of 5A and is ideal for AC motor control applications. With a compact rectangular package style and surface mount design, it offers precise control in a variety of motion control systems.
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
FSB50450AT
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Minimum Supply Voltage (Vsup): 13.5 V; Width (mm): 12 mm;
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Length: 29 mm;
FSB50250A
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Output Current: 3.1 A; Maximum Seated Height: 3.3 mm;
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Package Equivalence Code: MODULE,23LEAD,.55; Terminal Form: THROUGH-HOLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved