Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi FSB50450AS is a Motion Control IC with 23 terminals, operating at a nominal voltage of 15V. It features a max output current of 3.9A and is designed for AC motor control applications. With a compact rectangular package style and gull wing terminal form, it offers precise control in a small footprint.
Median Price
$3.942
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
DigiKey
1+ parts
$9.260
100+ parts
$4.771
1k+ parts
-
10k+ parts
Mouser Electronics
$4.390
$3.890
Flip Electronics (Authorized)
Arrow
$3.931
Verical
Newark
$3.900
$3.710
Chip1Stop
$4.320
Rochester
$3.490
$3.280
Digiode
$4.114
Nova Conductors
$5.784
Chip Stock
Flip Electronics
Martec Srl
Vyrian
Semicontronic
$3.360
$3.276
$3.259
Ampacity Inc.
Corphita
$3.897
Corohmni
$3.939
Continental Prestige Electronics
$5.668
Netroflash
Advanced Electronics
$12.685
$12.051
Aztec Data Supply Inc.
$19.694
Lixinc
TANS Electronics
A-Z Elektronik GmbH
Problanco Electronics
Microchip USA
SupplyDigital Components
Alle Elektronik GmbH
Argo Parts USA
Perfect Parts
Kulean Microsystems
Assy Fe
UHIMA Technologies
Authorized Procurement Solutions
Supply Digital
Surface mount technology makes the product compact and suitable for automated assembly, saving space and reducing production costs.
The 15V nominal supply voltage ensures compatibility with a wide range of applications and power sources.
Having 23 terminals provides flexibility in connecting to external components and peripherals, allowing for versatile control options.
The low maximum seated height enables compact designs and reduces the overall profile of the product in space-constrained applications.
The 12mm width ensures a small footprint, making it suitable for integration into tight spaces or alongside other components on a circuit board.
With a minimum supply voltage of 13.5V, the product can operate reliably even under lower power conditions, increasing its versatility.
The high maximum output current of 3.9A enables the control of powerful motors or actuators, making it suitable for demanding applications.
MSL level 3 indicates that the product has moderate sensitivity to moisture, allowing for safe storage and handling in typical manufacturing environments.
The 16.5V maximum supply voltage ensures compatibility with higher voltage systems, providing flexibility in application design.
Motion Control ICs FSB50450AS attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
FSB50450AS Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Cheng-yi Electronic
ERJ6ENF10R0V
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99-7-F
Multicomp Pro
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
Temic Semiconductors
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
PDRV8889QPWPRQ1
Texas Instruments
PDRV8889QPWPRQ1 by Texas Instruments is a Motion Control IC with AEC-Q100 screening for automotive applications. It operates b/w -40 to 125°C, supporting supply voltages from 4.5V to 45V. This stepper motor controller has a small outline package with 24 terminals in gull wing form.
TLE52062GPAUMA1
Infineon Technologies
TLE52062GPAUMA1 by Infineon is a Motion Control IC with 20 terminals, BCDMOS technology, and 6A max output current. It is a Brush DC Motor Controller suitable for applications requiring a supply voltage range of 6-40V and compact design with small outline package style.
IMC101TT038XUMA1
Infineon's IMC101TT038XUMA1 is a Motion Control IC with 38 terminals, operating at 3.3V to 5.5V. It features a small outline package suitable for AC motor controllers in industrial applications, with a temperature range of -40°C to 105°C and low profile design.
TLE5206-2S
Siemens
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: SINGLE; Terminal Form: THROUGH-HOLE;
FNB34060T6
FNB34060T6 by Onsemi is a Motion Control IC with 27 terminals, operating b/w -40 to 125°C. It features a nominal voltage of 15V and max supply current of 6mA. Ideal for automotive applications as a Brushless DC Motor Controller in a rectangular package style.
MC33887APVW
Freescale Semiconductor
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DRV10975ZRHFR
DRV10975ZRHFR by Texas Instruments is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It is a Brushless DC Motor Controller suitable for automotive applications, with a supply voltage range of 6.5V to 18V and compact dimensions of 5mm x 4mm x 1mm.
A4955GLPTR-T
Allegro MicroSystems
Allegro MicroSystems' A4955GLPTR-T is a Motion Control IC with 20 terminals in a small outline package. It operates b/w -40°C to 105°C, suitable for industrial applications. With a min supply voltage of 5.5V and max of 50V, it's ideal for brush DC motor control systems.
TB6600FG
Toshiba
TB6600FG by Toshiba is a Motion Control IC with 64 terminals, supporting a max output current of 4.5A. Operating b/w -30 to 85°C, it accepts supply voltages from 8V to 42V making it ideal for stepper motor control applications. The package style includes flatpack, heat sink/slug, and thin profile options in a square shape.
A3959SLBTR-T
Allegro MicroSystems' A3959SLBTR-T is a Motion Control IC with 24 terminals, 5V supply voltage, and 6A output current. Ideal for stepper motor control applications, this NMOS technology-based IC operates b/w -20°C to 85°C temperature range in a small outline package.
MC33HB2001EK
MC33HB2001EK by NXP Semiconductors is a Motion Control IC with 32 terminals, operating voltage range of 5-28V, and max output current of 16A. Ideal for automotive applications due to AEC-Q100 screening, MOS technology, and compact design.
PDRV8316RRGFR
The Texas Instruments PDRV8316RRGFR is a Motion Control IC with 24V nominal voltage, 8A max output current, and 40 terminals. Ideal for automotive applications, this chip carrier package supports brushless DC motor control with a wide operating temperature range from -40 to 125°C.
DRV10866DSCR
DRV10866DSCR by Texas Instruments is a motion control IC with a square package and a small outline, heat sink/slug, very thin profile. It operates at a nominal voltage of 3V and has a max output current of 0.85A. This IC is commonly used as a brushless DC motor controller in industrial applications.
DRV8231ADDAR
DRV8231ADDAR by Texas Instruments is a Motion Control IC with 8 terminals and a supply voltage range of 4.5V to 33V. It offers a max output current of 3.7A, suitable for brush DC motor control applications. With a small outline package style and low profile design, it operates in temperatures ranging from -40°C to 150°C.
MC33035DW
Motorola
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
E-PBL3717A
STMicroelectronics
E-PBL3717A by STMicroelectronics is a Motion Control IC with 16 terminals, operating voltage range of 4.75V to 5.25V, and max output current of 1.2A. It is designed for stepper motor control applications, featuring a rectangular package style with through-hole terminals suitable for commercial temperature grades up to 70°C.
A4979GLPTR-T
Allegro MicroSystems' A4979GLPTR-T is a Motion Control IC with 3.3V supply, 28 terminals, and -40 to 105°C operating temperature range. Ideal for stepper motor control applications due to its small outline package and industrial-grade temperature rating.
DRV8256ERGER
DRV8256ERGER by Texas Instruments is a Motion Control IC with 24V nominal voltage, 5A max output current, and 48V max supply voltage. It is ideal for automotive applications due to its nickel palladium gold terminal finish and -40 to 125°C operating temperature range. The chip carrier package style with a very thin profile makes it suitable for compact designs requiring precise brush DC motor control.
DRV8243SQDGQRQ1
DRV8243SQDGQRQ1 by Texas Instruments is a Motion Control IC with 28 terminals, operating voltage range of 4.5V to 35V, and max output current of 12A. It is ideal for BRUSH DC MOTOR CONTROL applications, featuring BICMOS technology and AEC-Q100 screening level for automotive use. The IC operates in temperatures from -40°C to 125°C, making it suitable for various industrial environments.
MCF8316A1VRGFR
MCF8316A1VRGFR by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 4.5V to 35V, and max output current of 8A. Ideal for applications requiring Brushless DC Motor control in a compact chip carrier package measuring 7mm x 5mm with very thin profile. Operating temperature ranges from -40°C to 125°C make it suitable for various industrial environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FSB50550ASE
Fairchild Semiconductor
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Output Current: 5 A; Terminal Form: GULL WING;
FSB50550ASE by Onsemi is a Motion Control IC with 23 terminals, operating at 13.5-16.5V. It has a max output current of 5A and peak reflow temperature of 260°C. Ideal for AC motor control applications due to its compact rectangular package style and matte tin terminal finish.
FSB50450AS
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Seated Height: 3.5 mm; JESD-30 Code: R-XDMA-G23;
FSB50760SFS
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; No. of Functions: 1; Qualification: Not Qualified;
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-30 Code: R-XDMA-G23; Nominal Supply Voltage (Vsup): 15 V;
FSB50450S
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Moisture Sensitivity Level (MSL): 3; Terminal Finish: Matte Tin (Sn);
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: UNSPECIFIED; Maximum Output Current: 3 A;
FSB50250US
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; No. of Functions: 1; Peak Reflow Temperature (C): 260;
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Moisture Sensitivity Level (MSL): 3; Terminal Finish: MATTE TIN;
FSB52006S
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Form: GULL WING; Qualification: Not Qualified;
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: UNSPECIFIED; JESD-609 Code: e3;
FSB50450A
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Length: 29 mm; Nominal Supply Voltage (Vsup): 15 V;
FSB50450A by Onsemi is a Motion Control IC with 23 terminals, operating at 15V. It features a max output current of 3.9A and is designed for AC motor control applications. With a package style of MICROELECTRONIC ASSEMBLY, it offers a compact solution for precise motion control systems.
FSB50550AS
FSB50550AS by Onsemi is a Motion Control IC with 23 terminals, operating at 15V. It features a max output current of 5A and is ideal for AC motor control applications. With a compact rectangular package style and surface mount design, it offers precise control in a variety of motion control systems.
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
FSB50450AT
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Minimum Supply Voltage (Vsup): 13.5 V; Width (mm): 12 mm;
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Length: 29 mm;
FSB50250A
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Output Current: 3.1 A; Maximum Seated Height: 3.3 mm;
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Package Equivalence Code: MODULE,23LEAD,.55; Terminal Form: THROUGH-HOLE;
FSB50760SFT
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Power Supplies (V): 15; Width (mm): 12 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved