Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV70627DQ001R2G by Onsemi is a Motion Control IC with 36 terminals, operating at a supply voltage range of 5.5V to 29V. It features a max output current of 0.8A and is designed for stepper motor control applications. The package style is small outline with heat sink, making it suitable for compact designs requiring precise motion control.
Median Price
$3.588
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$3.190
1k+ parts
$2.860
10k+ parts
$2.690
Verical
$3.987
$3.575
$3.362
Nova Conductors
$6.450
Chip Stock
Vyrian
Pegasus Components GmbH
Digiode
Ampacity Inc.
$1.500
AZTECH Wire
$3.490
$3.350
$3.280
$3.220
Semicontronic
$4.500
$4.388
$4.365
Vigor
$6.080
Corohmni
$6.321
Continental Prestige Electronics
Netroflash
Aztec Data Supply Inc.
$8.190
Modulus Dynamics
$20.273
Perfect Parts
Authorized Procurement Solutions
Kepictronics
Lixinc
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Argo Parts USA
Microchip USA
Futuretech Components
Problanco Electronics
Corphita
Advanced Electronics
UHIMA Technologies
The use of plastic/epoxy as the package body material ensures durability and protection for the internal components of the Motion Control ICs.
Being surface mountable makes installation of the Motion Control ICs easier and more efficient.
The nominal supply voltage of 7V ensures compatibility with a wide range of applications, making it versatile and easy to integrate.
The high number of terminals allows for more connectivity options and versatility in the use of the Motion Control ICs.
With a maximum output current of 0.8 A, this product can handle a decent amount of power for driving motors and other components.
Motion Control ICs NCV70627DQ001R2G attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
NCV70627DQ001R2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL NOTICE 30/Mar/2023
PCN Design/Specification - NCV70627 Parameters Chg/Datasheet Update 8/Dec/2015
PCN Assembly/Origin - NCV7062 DualSource Chg Initial Notice 22/Jun/2017
PCN Other - MSL Update 04/Sep/2015
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
EU2B-YS3303C
Idec
ROTARY SWITCH;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
1N4148
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
International Devices
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
Zetex Plc
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DRV8323SRTAR
Texas Instruments
DRV8323SRTAR by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 6-60V, and max output current of 1A. Ideal for automotive applications, it features a temp range of -40 to 125°C and terminal finish of Ni/Pd/Au. Package style includes chip carrier and heat sink/slug in a square shape.
IRMCK311TY
International Rectifier
Motion Control Electronics; Temperature Grade: INDUSTRIAL; No. of Terminals: 64; Package Code: QFP; Package Shape: SQUARE; Surface Mount: YES;
BD16805FV-ME2
ROHM
ROHM's BD16805FV-ME2 is a Motion Control IC with 8-18V power supplies, 40 terminals, and -40 to 110°C operating temperature range. Ideal for Brush DC Motor control applications due to its small outline package and industrial temperature grade suitability.
FSB50250A
Onsemi
FSB50250A by Onsemi is a Motion Control IC with 23 terminals, Vsup range of 13.5-16.5V, and max output current of 3.1A. Ideal for AC motor control applications due to its compact MICROELECTRONIC ASSEMBLY package style and matte tin terminal finish.
DRV8886ATRHRR
DRV8886ATRHRR by Texas Instruments is a Motion Control IC with 28 terminals, operating voltage range of 8-37V, and temp. range of -40 to 125°C. Ideal for automotive applications, this IC features a compact rectangular package suitable for surface mount assembly in stepper motor controllers.
IRSM836-025MA
AC MOTOR CONTROLLER; No. of Terminals: 36; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES; Maximum Supply Current (Isup): 10 mA;
L297/1
STMicroelectronics L297/1 is a Motion Control IC with 20 terminals, operating voltage of 5V, and max supply current of 80mA. It is used as a Stepper Motor Controller in automotive applications due to its bipolar technology and temperature range from -40°C to 150°C.
DRV10983SQPWPRQ1
DRV10983SQPWPRQ1 by Texas Instruments is a Motion Control IC with 24 terminals, operating voltage range of 6.2V to 28V, and AEC-Q100 screening level for automotive applications. It features a small outline package with dimensions of 7.8mm x 4.4mm x 1.2mm, suitable for brushless DC motor control in automotive systems up to 125°C temperature range.
SLA7078MPRT
Sanken Electric
STEPPER MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: NO; Peak Reflow Temperature (C): NOT SPECIFIED; Minimum Supply Voltage (Vsup): 3 V;
L6472PD
L6472PD by STMicroelectronics is a Motion Control IC with 36V nominal voltage, 7A max output current, and 3.6mm seated height. Ideal for stepper motor control applications due to its small outline package and dual terminal position. Suitable for surface mount designs with a rectangular shape and matte tin finish terminals.
L6235PD013TR
STMicroelectronics L6235PD013TR is a Motion Control IC with 36 terminals, operating voltage of 8-52V, and max output current of 5.6A. Ideal for automotive applications, it features BCDMOS technology, peak reflow temp of 245°C, and small outline package style.
LV8761V-TLM-E
LV8761V-TLM-E by Onsemi is a Motion Control IC with 36 terminals, operating at -20 to 85°C. It has a power supply of 5,24V and uses BICMOS technology. Ideal for applications requiring precise motion control in compact designs.
DRV8243PQDGQRQ1
Texas Instruments' DRV8243PQDGQRQ1 is a Motion Control IC with 28 terminals, suitable for BRUSH DC MOTOR CONTROL. It operates b/w -40 to 125 °C and supports a max output current of 12 A. The IC features BICMOS technology, GULL WING terminal form, and has a supply voltage range from 4.5 V to 35 V.
FNB41060
FNB41060 by Onsemi is a motion control IC with 1 function. It operates at a nominal voltage of 15V and has a max output current of 15A. This IC is commonly used as an AC motor controller in various applications.
DRV8818PWPR
DRV8818PWPR by Texas Instruments is a Motion Control IC with 28 terminals and a supply voltage range of 3-35V. It features a max output current of 2.5A, suitable for Stepper Motor Controllers in industrial applications. The package style is small outline with heat sink, ideal for compact designs requiring precise motion control.
A4980KLPTR-T
Allegro MicroSystems
A4980KLPTR-T by Allegro MicroSystems is a motion control IC with a rectangular package and a small outline. It operates at a nominal voltage of 3.3V and has a max operating temperature of 150°C. This IC is commonly used as a stepper motor controller in automotive applications.
FPAB30BH60B
Fairchild Semiconductor
AC MOTOR CONTROLLER; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Finish: MATTE TIN; No. of Functions: 1;
STSPIN240
STSPIN240 by STMicroelectronics is a Motion Control IC with 16 terminals, operating voltage range of 1.8V to 10V. It comes in a square chip carrier package style suitable for brush DC motor control applications. The compact design with a seated height of 1mm and terminal pitch of 0.5mm makes it ideal for space-constrained projects.
DRV8243SQDGQRQ1
DRV8243SQDGQRQ1 by Texas Instruments is a Motion Control IC with 28 terminals, operating voltage range of 4.5V to 35V, and max output current of 12A. It is ideal for BRUSH DC MOTOR CONTROL applications, featuring BICMOS technology and AEC-Q100 screening level for automotive use. The IC operates in temperatures from -40°C to 125°C, making it suitable for various industrial environments.
IRMCF188TY
Infineon Technologies
Infineon's IRMCF188TY is a Motion Control IC for automotive applications. It operates at 3-3.6V with 64 terminals in a low-profile flatpack package. With a temp range of -40 to 125°C, it's ideal for brushless DC motor control systems in vehicles.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV7708FDWR2G
NCV7708FDWR2G by Onsemi is a Motion Control IC with 28 terminals, operating at 3.3V to 5.25V. It features a max output current of 2A and is designed for stepper motor control applications. This small outline package has a rectangular shape, matte tin finish, and gull wing terminal form.
NCV7720DQAR2G
NCV7720DQAR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It has a supply voltage range of 3.15-5.25 V and output current of 0.55 A, suitable for automotive applications like brush DC motor control due to its AEC-Q100 screening level.
NCV7708BDWR2G
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV7724DQBR2G
BRUSH DC MOTOR CONTROLLER;
NCV70627DQ002AR2G
STEPPER MOTOR CONTROLLER; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e4;
NCV7535DBR2G
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-609 Code: e4;
NCV7725DQBR2G
NCV7725DQBR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 150 °C. It features a supply voltage range of 3.15-5.25 V and output current up to 0.5 A. Ideal for automotive applications due to AEC-Q100 screening level and compact design in small outline package style.
NCV70624DW010R2G
NCV70624DW010R2G by Onsemi is a motion control IC with a rectangular package shape and small outline style. It operates at a nominal voltage of 14V and has a max output current of 0.8A. This IC is commonly used as a stepper motor controller in various applications.
NCV7703BD2R2G
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Pitch: 1.27 mm;
NCV7702BDWR2G
NCV7702BDWR2G by Onsemi is a Motion Control IC with 2 functions, operating at 7-16V. It is a Stepper Motor Controller in a small outline package suitable for automotive applications. With dual terminals and matte tin finish, it can operate b/w -40 to 125°C efficiently.
NCV70514MW003R2G
STEPPER MOTOR CONTROLLER; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Terminal Position: QUAD;
NCV7726DQAR2G
NCV7726DQAR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It features a supply voltage range of 3.15V to 5.25V and supports Brushless DC Motor control applications in automotive environments. The package style is small outline with heat sink, suitable for surface mount assembly with nickel gold palladium terminal finish.
NCV7723DQBR2G
BRUSH DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV70521MN003R2G
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NCV70514MW007G
NCV70522DQ004G
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV70522DQ004R2G
NCV70514MW003BR2G
NCV70514MW007R2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved