Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV7708FDWR2G by Onsemi is a Motion Control IC with 28 terminals, operating at 3.3V to 5.25V. It features a max output current of 2A and is designed for stepper motor control applications. This small outline package has a rectangular shape, matte tin finish, and gull wing terminal form.
Median Price
$3.922
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$4.540
100+ parts
$2.850
1k+ parts
$2.710
10k+ parts
-
Arrow
$4.642
$3.170
$2.254
DigiKey
$4.760
$3.006
$2.851
Verical
$2.493
$2.379
Rochester
$2.190
$1.960
$1.850
RS (Exports)
$3.305
$2.890
Nova Conductors
$2.742
Digiode
$4.410
Maritex
$7.600
$4.281
$3.368
Flip Electronics
Chip Stock
ComSIT Distribution GmbH
Vyrian
NAC Semi
$4.080
$3.770
IBS Electronics
$3.708
$3.652
Cyclops Electronics Ltd
NexGen Digital
Ampacity Inc.
$2.230
Semicontronic
$2.174
$2.163
Corohmni
$2.625
Argo Parts USA
Continental Prestige Electronics
$2.687
Netroflash
Vigor
$3.090
Aztec Data Supply Inc.
$3.485
Advanced Electronics
$4.075
$3.871
Corphita
$4.178
Microchip USA
$16.957
RC Electronics
$2.820
$2.570
$2.500
QUARKTWIN TECHNOLOGY LTD
GreenTree Electronics
Kulean Microsystems
Problanco Electronics
TANS Electronics
Alle Elektronik GmbH
SupplyDigital Components
Authorized Procurement Solutions
iodParts Technologies Inc.
Futuretech Components
UHIMA Technologies
Lixinc
This material provides durability and protection for the internal components of the motion control IC, ensuring a longer lifespan.
Ease of installation and integration onto circuit boards, saving time and effort during assembly.
Optimal voltage supply for efficient performance and power consumption of the motion control IC.
Compact design for space-saving installation in various electronic devices.
Capable of handling high output current requirements, suitable for driving stepper motors and controlling motion systems effectively.
Motion Control ICs NCV7708FDWR2G attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
NCV7708FDWR2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL/Fab Site 05/Oct/2021
PCN Assembly/Origin - Wafer Fab Transfer 23/Dec/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
1552200253
Molex
WIRE AND CABLE;
BSS138NH6327XTSA2
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
1N4148
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
LV8413GP-TE-L-H
LV8413GP-TE-L-H by Onsemi is a Motion Control IC in PLASTIC/EPOXY package with 16 terminals. Operates at -20 to 85°C, with 3.3/5V supplies and BICMOS technology. Ideal for motion control applications requiring low supply current and high peak reflow temperatures.
MAX6650EUB-T
Maxim Integrated
MAX6650EUB-T by Maxim Integrated is a Motion Control IC with 10 terminals, operating at -40 to 85 °C. It has a supply voltage range of 3-5 V and output current of 0.1 A. Ideal for industrial applications requiring brushless DC motor control in a compact square package.
VNH5019ATR-E
STMicroelectronics
VNH5019ATR-E by STMicroelectronics is a Motion Control IC with 30 terminals, operating voltage range of 5.5-24V, and max output current of 30A. Ideal for brush DC motor control applications due to its compact size, dual terminal position, and wide temperature range (-40 to 150°C).
DRV8830DRCR
DRV8830DRCR by Texas Instruments is a Motion Control IC with 10 terminals, operating voltage of 3-6.5V, and max output current of 1A. Ideal for industrial applications like brush DC motor control due to its compact square package and wide temperature range (-40 to 85°C).
DRV3220QPHPRQ1
Texas Instruments' DRV3220QPHPRQ1 is a motion control IC with 48 terminals, suitable for automotive applications. It operates b/w -40 to 125°C and supports a supply voltage range of 4.75V to 40V. With a max output current of 1A, it features a flatpack package style and gull wing terminal form.
NCV7708BDWR2G
NCV7708BDWR2G by Onsemi is a Motion Control IC with 28 terminals, operating b/w -40 to 125 °C. It features a Stepper Motor Controller for automotive applications, supporting supply voltage range of 3-5.25 V and output current up to 0.5 A. The compact rectangular package is surface mountable with matte tin finish and gull wing terminals.
MP6619GQ-Z
Monolithic Power Systems
BRUSH DC MOTOR CONTROLLER;
FPAB30BH60B
Fairchild Semiconductor
AC MOTOR CONTROLLER; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Finish: MATTE TIN; No. of Functions: 1;
L6225DTR
L6225DTR by STMicroelectronics is a Motion Control IC with 48V nominal voltage, suitable for automotive applications. It features a max output current of 2.8A and operates in temperatures ranging from -40 to 150°C. This BCDMOS technology IC comes in a small outline package with gull wing terminals for surface mounting.
BD6393FP-E2
ROHM
BD6393FP-E2 by ROHM is a motion control IC with a supply voltage range of 16V to 28V. It features a max output current of 1.2A and operates in temperatures ranging from -25°C to 75°C. This IC is commonly used as a stepper motor controller in various applications.
L6226QTR
L6226QTR by STMicroelectronics is a Motion Control IC with 32 terminals, operating voltage range of 8-52V. It features BCDMOS technology, automotive-grade temperature rating (-40 to 150°C), and is ideal for brush DC motor control applications.
TMC2130-LA
Trinamic Motion Control & Kg
TMC2130-LA by Trinamic is a Motion Control IC with 36 terminals, operating b/w -40 to 125°C. It's a Stepper Motor Controller with 3A output current, suitable for automotive applications due to its CMOS technology and low profile design.
DRV8832DGQR
DRV8832DGQR by Texas Instruments is a Motion Control IC with 10 terminals and a supply voltage range of 2.7-6V. It features a max output current of 1A, suitable for brush DC motor control applications. With a compact square package style and industrial temperature grade, it offers efficient performance in various motion control systems.
TMC2660C-PA
TMC2660C-PA by Trinamic is a Motion Control IC with 44 terminals, operating voltage range of 5-29V, and max output current of 7A. Ideal for automotive applications due to its temp grade and CMOS technology, it's a stepper motor controller in a square package suitable for surface mount assembly.
A3984SLPTR-T
Allegro MicroSystems' A3984SLPTR-T is a Motion Control IC with 24 terminals, operating voltage of 3-5.35V, and max output current of 2A. Ideal for stepper motor control applications due to its compact size, dual terminal position, and NMOS technology ensuring efficient performance in temperature range -20 to 85°C.
L6228DTR
STMicroelectronics L6228DTR is a Motion Control IC with 48V supply voltage, suitable for automotive applications. It features 2.8A output current, BCDMOS technology, and operates b/w -40 to 150°C. With 24 terminals in a small outline package, it's ideal for stepper motor control in compact designs.
IR2238QPBF
International Rectifier
AC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 64; Package Code: QFP; Package Shape: RECTANGULAR; Surface Mount: YES;
DRV8711DCPR
DRV8711DCPR by Texas Instruments is a motion control IC with a nominal voltage of 24V. It features a small outline package style, dual terminal position, and can operate in industrial temperature grades. This stepper motor controller has a max supply voltage of 52V and is suitable for applications requiring precise motion control in various industries.
DRV8847RTER
DRV8847RTER by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 2.7V to 18V, and temperature grade suitable for automotive applications. It features a compact square package style with very thin profile and can handle temperatures from -40°C to 125°C. Ideal for stepper motor control in various electronic systems.
L6506
Sgs-ates Componenti Electronici S P A
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV7720DQAR2G
NCV7720DQAR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It has a supply voltage range of 3.15-5.25 V and output current of 0.55 A, suitable for automotive applications like brush DC motor control due to its AEC-Q100 screening level.
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV70627DQ001R2G
STEPPER MOTOR CONTROLLER; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Pitch: .5 mm;
NCV7724DQBR2G
NCV70627DQ002AR2G
STEPPER MOTOR CONTROLLER; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e4;
NCV7535DBR2G
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-609 Code: e4;
NCV7725DQBR2G
NCV7725DQBR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 150 °C. It features a supply voltage range of 3.15-5.25 V and output current up to 0.5 A. Ideal for automotive applications due to AEC-Q100 screening level and compact design in small outline package style.
NCV70624DW010R2G
NCV70624DW010R2G by Onsemi is a motion control IC with a rectangular package shape and small outline style. It operates at a nominal voltage of 14V and has a max output current of 0.8A. This IC is commonly used as a stepper motor controller in various applications.
NCV7703BD2R2G
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Pitch: 1.27 mm;
NCV7702BDWR2G
NCV7702BDWR2G by Onsemi is a Motion Control IC with 2 functions, operating at 7-16V. It is a Stepper Motor Controller in a small outline package suitable for automotive applications. With dual terminals and matte tin finish, it can operate b/w -40 to 125°C efficiently.
NCV70514MW003R2G
STEPPER MOTOR CONTROLLER; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Terminal Position: QUAD;
NCV7726DQAR2G
NCV7726DQAR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It features a supply voltage range of 3.15V to 5.25V and supports Brushless DC Motor control applications in automotive environments. The package style is small outline with heat sink, suitable for surface mount assembly with nickel gold palladium terminal finish.
NCV7723DQBR2G
BRUSH DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV70521MN003R2G
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NCV70514MW007G
NCV70522DQ004G
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV70522DQ004R2G
NCV70514MW003BR2G
NCV70514MW007R2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved