Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV70501DW002R2G by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 6-29V, and output current of 0.3A. Ideal for automotive applications, this bipolar technology IC features a small outline package style and matte tin terminal finish.
Median Price
$1.435
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Arrow
1+ parts
$1.311
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$1.870
DigiKey
$1.460
Rochester
$1.410
$1.260
$1.180
Verical
Digiode
$1.248
Flip Electronics
Vyrian
Chip Stock
HZD GmbH
Prism Electronics
Corphita
$1.183
Corohmni
$1.314
Component Stockers USA
$1.530
AZTECH Wire
$14.210
Kepictronics
Perfect Parts
Problanco Electronics
TANS Electronics
Authorized Procurement Solutions
Vigor
Kulean Microsystems
Microchip USA
SupplyDigital Components
UHIMA Technologies
This material provides durability and protection for the internal components of the IC, ensuring a longer lifespan for the product.
Allows for easy and efficient installation on circuit boards, saving time and effort during assembly.
Wide range of power supply compatibility allows flexibility in different circuit configurations and applications.
Sufficient number of terminals for connecting various components and interfaces, enabling versatile functionality.
High maximum operating temperature ensures reliability and performance in demanding conditions.
Wide temperature range support allows the IC to be used in a variety of environments, including harsh and cold conditions.
The matte tin finish provides good conductivity and solderability, enhancing the reliability of connections.
Capable of delivering a significant amount of current, making it suitable for driving stepper motors and other high-power applications.
Bipolar technology offers precise control and stability, ideal for motion control applications that require accuracy and efficiency.
Motion Control ICs NCV70501DW002R2G attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
NCV70501DW002R2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 10/Mar/2021
PCN Assembly/Origin - Back Grind Installation 09/Sep/2014
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
4554
Jw Miller Magnetics
Other Semiconductors;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
Grande Electronics
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
08055C104KAT4A
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
Microsemi
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N2222A
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
TLE5206-2G
Siemens
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: YES; Minimum Supply Voltage (Vsup): 5 V; Package Body Material: PLASTIC/EPOXY;
FSBB20CH60CT
FSBB20CH60CT by Onsemi is a Motion Control IC with 300V Vsup, 40A max output current, and 400V max supply voltage. Ideal for AC motor control applications due to its high power supplies (15V) and 27 terminals in a flange mount package style.
HIP4020IBZT
Renesas Electronics
Renesas Electronics' HIP4020IBZT is a motion control IC with 20 terminals, operating voltage range of 2.5V to 15V, and output current up to 0.5A. Ideal for stepper motor control applications, it features a small outline package with dimensions of 12.8mm x 7.5mm x 2.65mm and can operate in temperatures ranging from -40°C to 85°C.
FSBB20CH60CL
Fairchild Semiconductor
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): FLANGE MOUNT;
LB1836M-TLM-E
Sanyo Electric
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DRV8303DCAR
DRV8303DCAR by Texas Instruments is a Motion Control IC with 48 terminals, operating voltage range of 6-60V, and max output current of 1.7A. Ideal for automotive applications due to its compact size (12.5x6.1mm) and temp range (-40 to 125°C), it's designed as a Brushless DC Motor Controller for efficient motion control systems.
DRV8320SRTVT
Texas Instruments' DRV8320SRTVT is a Motion Control IC with 32 terminals, operating from -40 to 125°C. It supports BLDC motors, with a supply voltage range of 6-60V and max output current of 1A. Ideal for automotive applications due to its compact size and high temperature grade.
TMC260C-PA-T
Trinamic Motion Control & Kg
STEPPER MOTOR CONTROLLER; No. of Terminals: 44; Package Code: LFQFP; Package Shape: SQUARE; Surface Mount: YES; Minimum Supply Voltage (Vsup): 5 V;
TLE5206-2GP
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 20; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL; Maximum Output Current: 6 A;
DRV8323HRTAR
DRV8323HRTAR by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 6-60V, and max output current of 1A. Ideal for automotive applications, it features a temp range of -40 to 125°C and package style in CHIP CARRIER form.
L6208D
STMicroelectronics
L6208D by STMicroelectronics is a Motion Control IC with 24 terminals, operating voltage of 8-48V, and output current up to 5.6A. Ideal for automotive applications, this BCDMOS technology-based IC offers dual terminal position and small outline package style for stepper motor control.
L6205PD013TR
STMicroelectronics L6205PD013TR is a Motion Control IC with 48V Vsup, 5.6A output current, and BCDMOS technology. Ideal for automotive applications due to its -40 to 150 °C operating temperature range and small outline package style. It features dual terminals in a rectangular shape suitable for stepper motor control.
DRV8424PWPR
DRV8424PWPR by Texas Instruments is a Motion Control IC with 28 terminals, operating temperature range of -40 to 125°C, and max output current of 2.5A. It is a Stepper Motor Controller suitable for automotive applications due to its compact size (9.7mm x 4.4mm) and dual terminal position design, making it ideal for precise motion control in tight spaces.
L6506D
L6506D by STMicroelectronics is a Motion Control IC with 20 terminals, operating voltage of 5V, and small outline package. Ideal for stepper motor control applications, it has a temperature range of 0-70°C and uses bipolar technology. With surface mount capability and compact dimensions (12.8mm x 7.5mm x 2.65mm), it offers precise motion control in various commercial settings.
L6229QTR
STMicroelectronics L6229QTR is a Motion Control IC with 48V supply voltage, suitable for automotive applications. It features a max output current of 2.8A and operates in temperatures ranging from -40 to 150°C. The chip carrier package style with a very thin profile makes it ideal for surface mount applications.
DRV8837DSGT
DRV8837DSGT by Texas Instruments is a motion control IC with 8 terminals, operating voltage of 3-5V, and max output current of 1.8A. Ideal for brush DC motor control applications in industrial settings due to its compact square package and wide temperature range from -40 to 85°C.
DRV8245SQRXZRQ1
DRV8245SQRXZRQ1 by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 4.5V to 35V, and max output current of 32A. Ideal for Half Bridge Brush DC Motor Controllers in automotive applications due to AEC-Q100 screening and BICMOS technology ensuring reliability in temperature range -40°C to 125°C.
LV8548MC-AH
LV8548MC-AH by Onsemi is a Motion Control IC with 12V supply voltage, suitable for stepper motor control. It features a small outline package, dual terminal position, and BICMOS technology. With a wide operating temperature range (-30 to 85 °C), it is ideal for applications requiring precise motion control in various environments.
LV8761V-TLM-E
LV8761V-TLM-E by Onsemi is a Motion Control IC with 36 terminals, operating at -20 to 85°C. It has a power supply of 5,24V and uses BICMOS technology. Ideal for applications requiring precise motion control in compact designs.
FSB50450AT
FSB50450AT by Onsemi is a Motion Control IC with 23 terminals, operating at 15V. It features a max output current of 3.9A and supports AC motor control applications. With a compact rectangular package style measuring 29mm x 12mm, it is ideal for microelectronic assemblies requiring precise motion control within a voltage range of 13.5V to 16.5V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV7708FDWR2G
NCV7708FDWR2G by Onsemi is a Motion Control IC with 28 terminals, operating at 3.3V to 5.25V. It features a max output current of 2A and is designed for stepper motor control applications. This small outline package has a rectangular shape, matte tin finish, and gull wing terminal form.
NCV7720DQAR2G
NCV7720DQAR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It has a supply voltage range of 3.15-5.25 V and output current of 0.55 A, suitable for automotive applications like brush DC motor control due to its AEC-Q100 screening level.
NCV7708BDWR2G
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV70627DQ001R2G
STEPPER MOTOR CONTROLLER; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Pitch: .5 mm;
NCV7724DQBR2G
BRUSH DC MOTOR CONTROLLER;
NCV70627DQ002AR2G
STEPPER MOTOR CONTROLLER; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e4;
NCV7535DBR2G
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-609 Code: e4;
NCV7725DQBR2G
NCV7725DQBR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 150 °C. It features a supply voltage range of 3.15-5.25 V and output current up to 0.5 A. Ideal for automotive applications due to AEC-Q100 screening level and compact design in small outline package style.
NCV70624DW010R2G
NCV70624DW010R2G by Onsemi is a motion control IC with a rectangular package shape and small outline style. It operates at a nominal voltage of 14V and has a max output current of 0.8A. This IC is commonly used as a stepper motor controller in various applications.
NCV7703BD2R2G
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Pitch: 1.27 mm;
NCV7702BDWR2G
NCV7702BDWR2G by Onsemi is a Motion Control IC with 2 functions, operating at 7-16V. It is a Stepper Motor Controller in a small outline package suitable for automotive applications. With dual terminals and matte tin finish, it can operate b/w -40 to 125°C efficiently.
NCV70514MW003R2G
STEPPER MOTOR CONTROLLER; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Terminal Position: QUAD;
NCV7726DQAR2G
NCV7726DQAR2G by Onsemi is a Motion Control IC with 24 terminals, operating at -40 to 125 °C. It features a supply voltage range of 3.15V to 5.25V and supports Brushless DC Motor control applications in automotive environments. The package style is small outline with heat sink, suitable for surface mount assembly with nickel gold palladium terminal finish.
NCV7723DQBR2G
BRUSH DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV70521MN003R2G
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NCV70514MW007G
NCV70522DQ004G
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCV70522DQ004R2G
NCV70514MW003BR2G
NCV70514MW007R2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved